• 1689 Citations
  • 22 h-Index
19952020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Analysis of pelvic compensation for dynamic sagittal imbalance using motion analysis

Kim, H. J., Chun, H. J., Shen, F., Kang, K. T., Chang, B. S., Lee, C. K. & Yeom, J. S., 2020 Mar 1, In : European Spine Journal. 29, 3, p. 428-437 10 p.

Research output: Contribution to journalArticle

Anatomy-mimetic design preserves natural kinematics of knee joint in patient-specific mobile-bearing unicompartmental knee arthroplasty

Koh, Y. G., Lee, J. A., Lee, H. Y., Chun, H. J., Kim, H. J. & Kang, K. T., 2020 May 1, In : Knee Surgery, Sports Traumatology, Arthroscopy. 28, 5, p. 1465-1472 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Biomechanical simulation for cartilage regeneration of knee joint osteoarthritis with composite scaffold using ply angle optimization

Koh, Y. G., Lee, J. A., Chun, H. J. & Kang, K. T., 2020 Feb 1, In : Journal of Biomaterials Applications. 34, 7, p. 1019-1027 9 p.

Research output: Contribution to journalArticle

Definitions of unfavorable surgical outcomes and their risk factors based on disability score after spine surgery for lumbar spinal stenosis

Kim, G. U., Park, J., Kim, H. J., Shen, F., Cho, J., Chang, B. S., Lee, C. K., Chun, H. J. & Yeom, J. S., 2020 May 8, In : BMC Musculoskeletal Disorders. 21, 1, 288.

Research output: Contribution to journalArticle

Open Access

Effect of insert material on forces on quadriceps, collateral ligament, and patellar tendon after rotating platform mobile-bearing total knee arthroplasty

Koh, Y. G., Lee, J. A., Chun, H. J., Baek, C. & Kang, K. T., 2020 Jul, In : Asian Journal of Surgery. 43, 7, p. 742-749 8 p.

Research output: Contribution to journalArticle

Open Access

Morphometric study of gender difference in osteoarthritis posterior tibial slope using three-dimensional magnetic resonance imaging

Koh, Y. G., Nam, J. H., Chung, H. S., Chun, H. J., Kim, H. J. & Kang, K. T., 2020 Jun 1, In : Surgical and Radiologic Anatomy. 42, 6, p. 667-672 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Sleep Disturbance in Patients with Lumbar Spinal Stenosis: Association with Disability and Quality of Life

Lee, N. K., Jeon, S. W., Heo, Y. W., Shen, F., Kim, H. J., Yoon, I. Y., Chang, B. S., Lee, C. K., Chun, H. J. & Yeom, J. S., 2020, (Accepted/In press) In : Clinical Spine Surgery.

Research output: Contribution to journalArticle

2019

Design of a Multi-Layered Reconfigurable Frequency Selective Surface Using Water Channels

Son, D. C., Shin, H., Kim, Y. J., Hong, I. P., Chun, H. J., Choo, H. & Park, Y. B., 2019 Jan 30, In : Journal of Electrical Engineering and Technology. 14, 1, p. 331-337 7 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Design optimization of high tibial osteotomy plates using finite element analysis for improved biomechanical effect

Koh, Y. G., Lee, J. A., Lee, H. Y., Chun, H. J., Kim, H. J. & Kang, K. T., 2019 Jul 16, In : Journal of Orthopaedic Surgery and Research. 14, 1, 219.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

Failure mechanism of bonded joints with similar and dissimilar material

Hasheminia, S. M., Park, B. C., Chun, H. J., Park, J. C. & Chang, H. S., 2019 Mar 15, In : Composites Part B: Engineering. 161, p. 702-709 8 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Failure of Pelvic Compensation in Patients With Severe Positive Sagittal Imbalance: Comparison Between Static Radiographs and Gait Analysis of Spinopelvic Parameters in Adult Spinal Deformity and Lumbar Stenosis

Kim, H. J., Shen, F., Kang, K. T., Chun, H. J., Kim, S. T., Chang, B. S., Lee, C. K. & Yeom, J. S., 2019 Jul 1, In : Spine. 44, 13, p. E759-E765

Research output: Contribution to journalArticle

1 Citation (Scopus)

Gender differences in morphology exist in posterior condylar offsets of the knee in Korean population

Koh, Y. G., Nam, J. H., Chung, H. S., Kim, H. J., Chun, H. J. & Kang, K. T., 2019 May 1, In : Knee Surgery, Sports Traumatology, Arthroscopy. 27, 5, p. 1628-1634 7 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)
2018

Analysis on Wear Phenomenon of Artificial Knee Joint Based on FEM and Mechanical Test

Kang, Y. K., Kim, M. H., Kim, J. W., Tien, T. N., Lim, D. H. & Chun, H. J., 2018 Aug 1, In : International Journal of Precision Engineering and Manufacturing. 19, 8, p. 1211-1217 7 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Change in pain catastrophizing in patients with lumbar spinal surgery

Kim, H. J., Kwon, O. H., Chang, B. S., Lee, C. K., Chun, H. J. & Yeom, J. S., 2018 Jan, In : Spine Journal. 18, 1, p. 115-121 7 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)
7 Citations (Scopus)

Design of a Hemispherical Reconfigurable Frequency Selective Surface Using Water Channels

Son, D. C., Shin, H., Kim, Y. J., Hong, I. P., Chun, H. J., Jung, K. Y., Choo, H. & Park, Y. B., 2018, In : IEEE Access. 6, p. 61445-61451 7 p., 8482114.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Failure load prediction of composite bolted joint with clamping force

Choi, J. I., Hasheminia, S. M., Chun, H. J., Park, J. C. & Chang, H. S., 2018 Apr 1, In : Composite Structures. 189, p. 247-255 9 p.

Research output: Contribution to journalArticle

17 Citations (Scopus)

Nonlinear finite element modeling of large deformation of nanobeams

Hasheminia, S. M., Baradaran, G. H. & Chun, H. J., 2018 Jan 1, In : Acta Mechanica. 229, 1, p. 21-32 12 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

The influence of hand grip strength on surgical outcomes after surgery for degenerative lumbar spinal stenosis: a preliminary result

Shen, F., Kim, H. J., Lee, N. K., Chun, H. J., Chang, B. S., Lee, C. K. & Yeom, J. S., 2018 Nov, In : Spine Journal. 18, 11, p. 2018-2024 7 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Validation and cross-cultural adaptation of the Korean version of the Core Outcome Measures Index in patients with degenerative lumbar disease

Kim, H. J., Yeom, J. S., Nam, Y., Lee, N. K., Heo, Y. W., Lee, S. Y., Park, J., Chang, B. S., Lee, C. K., Chun, H. J. & Mannion, A. F., 2018 Nov 1, In : European Spine Journal. 27, 11, p. 2804-2813 10 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)
2017

Design and fabrication of a reconfigurable frequency selective surface using fluidic channels

Son, D. C., Shin, H., Kim, Y. J., Hong, I. P., Chun, H. J. & Park, Y. B., 2017 Nov, In : Journal of Electrical Engineering and Technology. 12, 6, p. 2342-2347 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Design of Active Frequency Selective Surface with Curved Composite Structures and Tunable Frequency Response

Lee, I. G., Park, Y. B., Chun, H. J., Kim, Y. J. & Hong, I. P., 2017, In : International Journal of Antennas and Propagation. 2017, 6307528.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Experimental study on failure mechanism of hybrid composite joints with different adhesives

Choi, J. I., Hasheminia, S. M., Chun, H. J. & Park, J. C., 2017 Mar 1, In : Fibers and Polymers. 18, 3, p. 569-574 6 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Experimental Study on Failure Mechanism of Single Lap-shear Bond Joint with Dissimilar Materials

Chung, S. H., Park, B. C., Chun, H. J. & Park, J. C., 2017 May 31, In : Journal of Physics: Conference Series. 843, 1, 012020.

Research output: Contribution to journalConference article

Probabilistic evaluation of the material properties of the in vivo subject-specific articular surface using a computational model

Kang, K. T., Kim, S. H., Son, J., Lee, Y. H., Kim, S. & Chun, H. J., 2017 Aug, In : Journal of Biomedical Materials Research - Part B Applied Biomaterials. 105, 6, p. 1390-1400 11 p.

Research output: Contribution to journalArticle

34 Citations (Scopus)

Statistical analysis of computed anatomical lumbar model shapes

Jeong, D. Y. & Chun, H. J., 2017 Dec, In : Transactions of the Korean Society of Mechanical Engineers, B. 41, 12, p. 795-802 8 p.

Research output: Contribution to journalArticle

Structural stability analysis of radome with liquid tuned FSS

You, B. R., Chun, H. J., Park, Y. B., Hong, I. P. & Kim, Y. J., 2017.

Research output: Contribution to conferencePaper

Thermal residual stresses in FSS layer-embedded composite plates in co-cure bonding

Kim, K. Y., Chun, H. J., Kang, K. T., Hong, I. P., Lee, K. W. & Lee, M. K., 2017 Nov 2, In : Advanced Composite Materials. 26, 6, p. 511-536 26 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2016

Analysis of Curved Frequency selective surface for radome using characteristic basis function method

Park, C. S., Jeong, Y. R., Hong, I. P., Chun, H. J., Park, Y. B., Kim, Y. J. & Yook, J. G., 2016 May 31, 2016 10th European Conference on Antennas and Propagation, EuCAP 2016. Institute of Electrical and Electronics Engineers Inc., 7481386. (2016 10th European Conference on Antennas and Propagation, EuCAP 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)
27 Citations (Scopus)

Design of X-band reconfigurable frequency selective surface with high isolation

Lee, I. G., Kim, Y. J., Park, Y. B., Chun, H. J. & Hong, I. P., 2016, In : ieice electronics express. 13, 16, 20160567.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Fast scattering analysis over a wide frequency band using Clenshaw-Lord-type Pade-Chebyshev approximation

Jeong, Y. R., Hong, I. P., Chun, H. J., Park, Y. B., Jae Kim, Y. & Yook, J. G., 2016 Feb 19, In : IET Microwaves, Antennas and Propagation. 10, 3, p. 245-250 6 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Influence of Dentoalveolar Ankylosis on the Biomechanical Response of a Single-rooted Tooth and Surrounding Alveolar Bone: A 3-dimensional Finite Element Analysis

Jang, Y., Hong, H. T., Chun, H. J. & Roh, B. D., 2016 Nov 1, In : Journal of endodontics. 42, 11, p. 1687-1692 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2015

Change of transmission characteristics of FSSs in hybrid composites due to residual stresses

Hwang, I. H., Chun, H. J., Hong, I. P., Park, Y. B. & Kim, Y. J., 2015 Dec 1, In : Steel and Composite Structures. 19, 6, p. 1501-1510 10 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Comparing an instrumented posterior fixation system with rigid and semi-flexible rods using finite element analysis

Kang, K. T., Kim, H. J., Son, J., Yeom, J. S. & Chun, H. J., 2015, In : International Journal of Precision Engineering and Manufacturing. 16, 1, p. 163-170 8 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Finite element analysis for comparison of spinous process osteotomies technique with conventional laminectomy as lumbar decompression procedure

Kim, H. J., Chun, H. J., Kang, K. T., Lee, H. M., Chang, B. S., Lee, C. K. & Yeom, J. S., 2015 Jan 1, In : Yonsei medical journal. 56, 1, p. 146-153 8 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Influence of apical root resection on the biomechanical response of a single-rooted tooth - Part 2: Apical root resection combined with periodontal bone loss

Jang, Y., Hong, H. T., Chun, H. J. & Roh, B. D., 2015 Mar 1, In : Journal of endodontics. 41, 3, p. 412-416 5 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

In vivo evaluation of the subject-specific finite element model for knee joint cartilage contact area

Kang, K. T., Kim, S. H., Son, J., Lee, Y. H. & Chun, H. J., 2015 Jun 10, In : International Journal of Precision Engineering and Manufacturing. 16, 6, p. 1171-1177 7 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Probabilistic approach for determining the material properties of meniscal attachments in vivo using magnetic resonance imaging and a finite element model

Kang, K. T., Kim, S. H., Son, J., Lee, Y. H. & Chun, H. J., 2015 Dec, In : Journal of Computational Biology. 22, 12, p. 1097-1107 11 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Registration sensitivity study of double-layer FSS design for radome

Park, C. S., Jeong, Y. R., Yook, J. G., Hong, I. P., Chun, H. J., Park, Y. B. & Kim, Y. J., 2015 Dec 23, 2015 International Workshop on Antenna Technology, iWAT 2015. Institute of Electrical and Electronics Engineers Inc., p. 342-344 3 p. 7365279. (2015 International Workshop on Antenna Technology, iWAT 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Residual stress and electromagnetic characteristics in loop type frequency selective surface embedded hybrid structures

Park, K. M., Seo, Y. S., Chun, H. J., Hong, I. P., Park, Y. B. & Kim, Y. J., 2015, In : Journal of Mechanical Science and Technology. 29, 1, p. 99-102 4 p.

Research output: Contribution to journalArticle

The influence of intrinsic disc degeneration of the adjacent segments on its stress distribution after one-level lumbar fusion

Kim, H. J., Kang, K. T., Chun, H. J., Lee, C. K., Chang, B. S. & Yeom, J. S., 2015 Apr 1, In : European Spine Journal. 24, 4, p. 827-837 11 p.

Research output: Contribution to journalArticle

24 Citations (Scopus)
2014

Analysis of FSS Radomes Based on Physical Optics Method and Ray Tracing Technique

Kim, J. H., Chun, H. J., Hong, I. P., Kim, Y. J. & Park, Y. B., 2014, In : IEEE Antennas and Wireless Propagation Letters. 13, p. 868-871 4 p., 6809189.

Research output: Contribution to journalArticle

48 Citations (Scopus)

Fast analysis over a wide band using Chebyshev approximation with Clenshaw-Lord approximation

Jeong, Y. R., Hong, I. P., Chun, H. J., Park, Y. B., Kim, Y. J. & Yook, J. G., 2014, 8th European Conference on Antennas and Propagation, EuCAP 2014. Institute of Electrical and Electronics Engineers Inc., p. 1353-1355 3 p. 6902029. (8th European Conference on Antennas and Propagation, EuCAP 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Influence of apical root resection on the biomechanical response of a single-rooted tooth: a 3-dimensional finite element analysis

Jang, Y., Hong, H. T., Roh, B. D. & Chun, H. J., 2014 Sep 1, In : Journal of endodontics. 40, 9, p. 1489-1493 5 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Optimal strength design of composite bicycle wheels

Hong, H. T., Chun, H. J. & Choi, H. S., 2014 Aug, In : International Journal of Precision Engineering and Manufacturing. 15, 8, p. 1609-1613 5 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Prediction of elastic properties for woven z-pinned composites

Chun, H. J., Son, J., Kang, K. T., Byun, J. H., Um, M. K. & Lee, S. K., 2014 Jun 17, In : Composites Part B: Engineering. 64, p. 59-71 13 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Scattering analysis of curved FSS using Floquet harmonics and asymptotic waveform evaluation technique

Jeong, Y. R., Hong, I. P., Chun, H. J., Park, Y. B., Kim, Y. J. & Yook, J. G., 2014 Nov 1, In : Steel and Composite Structures. 17, 5, p. 561-572 12 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Transmission characteristics of a composite made with ground granulated blast furnace slag

Jeong, Y. R., Hong, I. P., Chun, H. J. & Yook, J. G., 2014, In : ieice electronics express. 11, 2, 20130855.

Research output: Contribution to journalArticle

2013

Burn-wound healing effect of gelatin/polyurethane nanofiber scaffold containing silver-sulfadiazine

Heo, D. N., Yang, D. H., Lee, J. B., Bae, M. S., Kim, J. H., Moon, S. H., Chun, H. J., Kim, C. H., Lim, H. N. & Kwon, I. K., 2013 Mar, In : Journal of Biomedical Nanotechnology. 9, 3, p. 511-515 5 p.

Research output: Contribution to journalArticle

68 Citations (Scopus)