• 1103 Citations
  • 22 h-Index
1987 …2019
If you made any changes in Pure these will be visible here soon.

Research Output 1987 2019

2019
Plasma diodes
Austenite
Corrosion resistance
Electron beams
Ultrasonics
2018

Effect of chemical oxidizer on material removal rate in electrochemical oxidation assisted machining

Nam, E., Jo, H., Min, J., Lee, S. J. & Min, B-K., 2018 Aug 1, In : Journal of Materials Processing Technology. 258, p. 174-179 6 p.

Research output: Contribution to journalArticle

Electrochemical oxidation
Machining
Glassy carbon
Brittleness
Electrolytes
2017
3 Citations (Scopus)

Austenite phase transformation of SKD11 by surface heat treatment with a focused electron beam

Kang, E. G., Choi, H., Min, B-K. & Lee, S. J., 2017 Jul 15, In : Surface and Coatings Technology. 321, p. 247-256 10 p.

Research output: Contribution to journalArticle

Plasma diodes
plasma diodes
austenite
Austenite
phase transformations
5 Citations (Scopus)

Effect of electrochemical conditions on material removal rate in electrochemical oxidation assisted machining

Nam, E., Lee, C. Y., Min, J., Lee, S. J. & Min, B. K., 2017 Jan 1, In : Journal of the Electrochemical Society. 164, 2, p. E23-E28

Research output: Contribution to journalArticle

overvoltage
electrochemical oxidation
Electrochemical oxidation
machining
Machining

Plasma diode electron beam heat treatment of cast iron: Effect of direct preheating

Kang, E. G., Choi, H. Z., Min, B-K. & Lee, S. J., 2017 Oct 1, In : International Journal of Precision Engineering and Manufacturing. 18, 10, p. 1339-1345 7 p.

Research output: Contribution to journalArticle

Plasma diodes
Preheating
Cast iron
Electron beams
Heat treatment
2015
5 Citations (Scopus)

Emission characteristics of high-voltage plasma diode cathode for metal surface modification

Kang, E. G., Kim, J. S., Lee, S. W., Min, B-K. & Lee, S. J., 2015 Jan 1, In : International Journal of Precision Engineering and Manufacturing. 16, 1, p. 13-19 7 p.

Research output: Contribution to journalArticle

Plasma diodes
Surface treatment
Cathodes
Electric potential
Metals
2014

Geometric simulation based tool wear compensation in micro die-sinking EDM process

Heo, S., Kim, T. G., Lee, C. H., Min, B. K. & Lee, S. J., 2014 Jan 1, Proceedings - ASPE 2014 Annual Meeting. American Society for Precision Engineering, ASPE, p. 563-566 4 p. (Proceedings - ASPE 2014 Annual Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wear of materials
Compensation and Redress
2013
21 Citations (Scopus)

Microcellular foam processing of biodegradable polymers - review

Jeon, B., Kim, H. K., Cha, S. W., Lee, S. J., Han, M. S. & Lee, K. S., 2013 Apr 12, In : International Journal of Precision Engineering and Manufacturing. 14, 4, p. 679-690 12 p.

Research output: Contribution to journalReview article

Biodegradable polymers
Foams
Processing
Thermoforming
Costs
2 Citations (Scopus)

Synthesis and bidirectional frequency tuning of cantilever-shape nano resonators using a focused ion beam

Chang, J., Koh, K., Min, B. K., Lee, S. J., Kim, J. & Lin, L., 2013 Oct 18, In : ACS Applied Materials and Interfaces. 5, 19, p. 9684-9690 7 p.

Research output: Contribution to journalArticle

Focused ion beams
Resonators
Tuning
Natural frequencies
Trimming
2011
25 Citations (Scopus)

Micro-electrochemical discharge cutting of glass using a surface-textured tool

Han, M. S., Min, B. K. & Lee, S. J., 2011 Jul 11, In : CIRP Journal of Manufacturing Science and Technology. 4, 4, p. 362-369 8 p.

Research output: Contribution to journalArticle

Glass
Electric discharge machining
Wire
Electrodes
Lime
29 Citations (Scopus)

Ploughing detection in micromilling processes using the cutting force signal

Yun, H. T., Heo, S., Lee, M. K., Min, B. K. & Lee, S. J., 2011 May 1, In : International Journal of Machine Tools and Manufacture. 51, 5, p. 377-382 6 p.

Research output: Contribution to journalArticle

Multiresolution analysis
Wavelet transforms
Machining
Surface roughness
Experiments
2010
6 Citations (Scopus)
Electric discharge machining
Machining
Wear of materials
Electrons
Ions
24 Citations (Scopus)

An electrochemomechanical polishing process using magnetorheological fluid

Jang, K. I., Seok, J., Min, B. K. & Jo Lee, S., 2010 Oct 1, In : International Journal of Machine Tools and Manufacture. 50, 10, p. 869-881 13 p.

Research output: Contribution to journalArticle

Magnetorheological fluids
Polishing
Glassy carbon
Molds
Yield stress
2 Citations (Scopus)

Design and fabrication of multi-aperture plate for multi-ion beam patterning system

Choi, Y., Kim, T. G., Han, J., Min, B. K., Kim, Y. J. & Lee, S. J., 2010 Jun 1, In : Japanese Journal of Applied Physics. 49, 6 PART 2, p. 06GE061-06GE064

Research output: Contribution to journalArticle

Ion beams
apertures
ion beams
Fabrication
fabrication
4 Citations (Scopus)
Focused ion beams
Reactive ion etching
high aspect ratio
Ion implantation
Aspect ratio
17 Citations (Scopus)

Motor current prediction of a machine tool feed drive using a component-based simulation model

Jeong, Y. H., Min, B. K., Cho, D. W. & Lee, S. J., 2010 Aug 1, In : International Journal of Precision Engineering and Manufacturing. 11, 4, p. 597-606 10 p.

Research output: Contribution to journalArticle

Machine tools
Computer simulation
Electric current measurement
Model structures
Byproducts
25 Citations (Scopus)

Prediction of nanopattern topography using two-dimensional focused ion beam milling with beam irradiation intervals

Han, J., Lee, H., Min, B. K. & Lee, S. J., 2010 Jan 1, In : Microelectronic Engineering. 87, 1, p. 1-9 9 p.

Research output: Contribution to journalArticle

Focused ion beams
Topography
topography
ion beams
Irradiation

Simulation based off-line tool wear compensation in micro-EDM milling processes

Heo, S., Lee, W., Jeong, Y. H., Min, B. K. & Lee, S. J., 2010 Jan 1, p. 611-615. 5 p.

Research output: Contribution to conferencePaper

Wear of materials
Machine tools
Compensation and Redress
Hardware
3 Citations (Scopus)

The fabrication of metal silicide nanodot arrays using localized ion implantation

Han, J., Kim, T. G., Min, B. K. & Lee, S. J., 2010 Dec 3, In : Nanotechnology. 21, 48, 485303.

Research output: Contribution to journalArticle

Ion implantation
Etching
Metals
Fabrication
Ion beams
2009
6 Citations (Scopus)
Magnetorheological fluids
Particle interactions
Magnetic fields
Shear stress
Viscosity
4 Citations (Scopus)

A behavioral model of axisymmetrically configured magnetorheological fluid using Lekner summation

Jang, K. I., Seok, J., Min, B. K. & Lee, S. J., 2009 Apr 27, In : Journal of Applied Physics. 105, 7, 07D518.

Research output: Contribution to journalArticle

magnetorheological fluids
static models
dampers
shear stress
flux density
16 Citations (Scopus)

Behavioral model for magnetorheological fluid under a magnetic field using Lekner summation method

Jang, K. I., Seok, J., Min, B. K. & Lee, S. J., 2009 May 1, In : Journal of Magnetism and Magnetic Materials. 321, 9, p. 1167-1176 10 p.

Research output: Contribution to journalArticle

Magnetorheological fluids
magnetorheological fluids
Magnetic fields
magnetic fields
shear strain
7 Citations (Scopus)

Conceptual design of microcellular plastics bumper parts using axiomatic approach

Lee, K. S., Jeong, P. J., Lee, H., Lee, S. J. & Cha, S. W., 2009 Oct 1, In : Polymer - Plastics Technology and Engineering. 48, 10, p. 1101-1106 6 p.

Research output: Contribution to journalArticle

Conceptual design
Automobiles
Plastics
Physical properties
Composite materials
36 Citations (Scopus)

Deburring microfeatures using micro-EDM

Jeong, Y. H., HanYoo, B., Lee, H. U., Min, B. K., Cho, D. W. & Lee, S. J., 2009 Jul 19, In : Journal of Materials Processing Technology. 209, 14, p. 5399-5406 8 p.

Research output: Contribution to journalArticle

Deburring
Electric discharge machining
Machining
Conductive materials
Stainless Steel
33 Citations (Scopus)

Electrostatically actuated carbon nanowire nanotweezers

Chang, J., Min, B. K., Kim, J., Lee, S. J. & Lin, L., 2009 Aug 18, In : Smart Materials and Structures. 18, 6, 065017.

Research output: Contribution to journalArticle

Nanowires
nanowires
Carbon
Chemical vapor deposition
carbon
58 Citations (Scopus)
Electric sparks
Electrolytes
Drilling
Ultrasonics
Electric discharge machining
43 Citations (Scopus)

Magnetorheological finishing process for hard materials using sintered iron-CNT compound abrasives

Jung, B., Jang, K. I., Min, B. K., Lee, S. J. & Seok, J., 2009 Apr 1, In : International Journal of Machine Tools and Manufacture. 49, 5, p. 407-418 12 p.

Research output: Contribution to journalArticle

Iron compounds
Abrasives
Magnetorheological fluids
Iron powder
Hard disk storage

Microfabrication method using a combination of local ion implantation and magnetorheological finishing

Han, J., Kim, J. W., Lee, H., Min, B. K. & Lee, S. J., 2009 Feb 1, In : Applied Physics Express. 2, 2, 026503.

Research output: Contribution to journalArticle

Microfabrication
Ion implantation
ion implantation
wafers
machining
7 Citations (Scopus)
Magnetorheological fluids
Taguchi methods
Hard disk storage
Abrasives
Carbon nanotubes
30 Citations (Scopus)

Tribological properties of a magnetorheological (MR) fluid in a finishing process

Seok, J., Lee, S. O., Jang, KYUNG. IN., Min, B. K. & Lee, S. J., 2009 Dec 1, In : Tribology Transactions. 52, 4, p. 460-469 10 p.

Research output: Contribution to journalArticle

Magnetorheological fluids
magnetorheological fluids
machining
Friction
coefficient of friction
24 Citations (Scopus)

Virtual EDM simulator: Three-dimensional geometric simulation of micro-EDM milling processes

Heo, S., Jeong, Y. H., Min, B-K. & Lee, S. J., 2009 Oct 1, In : International Journal of Machine Tools and Manufacture. 49, 12-13, p. 1029-1034 6 p.

Research output: Contribution to journalArticle

Simulators
Wear of materials
Milling (machining)
Machining
Geometry
1 Citation (Scopus)

Wire electrochemical discharge machining of glass using a surface roughened tool

Han, M. S., Min, B. K. & Lee, S. J., 2009 Dec 1, p. 317-320. 4 p.

Research output: Contribution to conferencePaper

Electric discharge machining
Wire
Glass
Electric sparks
Electric field effects
2008
5 Citations (Scopus)

Electric field analysis for micro-EDM deburring process

Yoo, B. H., Jeong, Y. H., Min, B. K. & Lee, S. J., 2008 Sep 1, ICSMA 2008 - International Conference on Smart Manufacturing Application. p. 239-242 4 p. 4505649. (ICSMA 2008 - International Conference on Smart Manufacturing Application).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Deburring
Electric fields
Electrodes
Electric discharge machining
Kerosene

Geometric compensation of focused ion beam machining using image processing

Lee, H., Han, J., Min, B. K. & Lee, S. J., 2008 Dec 1, In : Applied Physics Express. 1, 12, p. 1270021-1270023 3 p.

Research output: Contribution to journalArticle

Focused ion beams
machining
image processing
Machining
Image processing
14 Citations (Scopus)

Model-based pulse frequency control for micro-EDM milling using real-time discharge pulse monitoring

Jung, J. W., Jeong, Y. H., Min, B. K. & Lee, S. J., 2008 Jun 1, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 130, 3, p. 311061-3110611 2799551 p.

Research output: Contribution to journalArticle

Wear of materials
Electrodes
Monitoring
Electric discharge machining
Motion planning
38 Citations (Scopus)
Electric discharge machining
Gases
Electrodes
Electric sparks
Electrolytes
6 Citations (Scopus)

Real-time gap control for micro-EDM: Application in a microfactory

Jung, J. W., Ko, S. H., Jeong, Y. H., Min, B. K. & Lee, S. J., 2008 Jan 1, In : International Journal of Precision Engineering and Manufacturing. 9, 1, p. 3-6 4 p.

Research output: Contribution to journalArticle

Machining
Electrodes
Wear of materials
Milling (machining)
Voltage measurement
7 Citations (Scopus)

Reduction of overcut in the electrochemical discharge machining process using a side-insulated electrode

Han, M. S., Min, B. K. & Lee, S. J., 2008 Sep 1, ICSMA 2008 - International Conference on Smart Manufacturing Application. p. 251-254 4 p. 4505652. (ICSMA 2008 - International Conference on Smart Manufacturing Application).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric discharge machining
Machining
Electrodes
Electric sparks
Electrolytes
2007
59 Citations (Scopus)

A study on the fabrication of curved surfaces using magnetorheological fluid finishing

Seok, J., Kim, Y. J., Jang, K. I., Min, B. K. & Lee, S. J., 2007 Nov 1, In : International Journal of Machine Tools and Manufacture. 47, 14, p. 2077-2090 14 p.

Research output: Contribution to journalArticle

Magnetorheological fluids
Fabrication
Magnetic fields
Experiments
Flow of fluids
5 Citations (Scopus)

Improvement of electro-chemical discharge machining process using a side insulated electrode

Han, M. S., Min, B. K. & Lee, S. J., 2007 Jan 1, Proceedings of the 15th International Symposium on Electromachining, ISEM 2007. Sundaram, M. M., Rajurkar, K. P. & Resnick, R. L. (eds.). Industrial and Management Systems Engineering, p. 451-455 5 p. (Proceedings of the 15th International Symposium on Electromachining, ISEM 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric discharge machining
Electrodes
Electric sparks
Wetting
Machining
55 Citations (Scopus)
Electric discharge machining
Powders
Electrolytes
Electric sparks
Machining
2006
3 Citations (Scopus)

Electrostatically actuated nano tweezers fabricated on micro processed electrodes

Chang, J., Kim, J., Min, B. K., Lee, S. J. & Lin, L., 2006 Dec 1, Proceedings of 1st IEEE International Conference on Nano Micro Engineered and Molecular Systems, 1st IEEE-NEMS. p. 1440-1444 5 p. 4135214. (Proceedings of 1st IEEE International Conference on Nano Micro Engineered and Molecular Systems, 1st IEEE-NEMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Articular Range of Motion
Static Electricity
Chemical vapor deposition
Electrodes
Carbon

Fabrication of the fine magnetic abrasives by using mechanical alloying process and its polishing characteristics

Park, S. J. & Lee, S. J., 2006 Dec 6, In : Key Engineering Materials. 326-328 I, p. 421-424 4 p.

Research output: Contribution to journalArticle

Mechanical alloying
Polishing
Abrasives
Powders
Fabrication

In-situ frequency tuning of electrostatically actuated vibrating nano structures using focused ion beam

Chang, J., Kim, J., Min, B. K., Lee, S. J. & Lin, L., 2006 Jan 1, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Microelectromechanical Systems. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) MEMS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Focused ion beams
Natural frequencies
Tuning
Resonators
Electrostatic force
8 Citations (Scopus)
Diesel engines
Exhaust gas recirculation
Systems analysis
Engines
2005
1 Citation (Scopus)

Application of MRF scheme for low-loss transmission lines on CMOS-grade silicon

Lee, S. N., Park, S. J., Lee, J. I., Yook, J. G., Kim, Y. J. & Lee, S. J., 2005 Sep 19, In : Proceedings - Electronic Components and Technology Conference. 2, p. 1514-1518 5 p.

Research output: Contribution to journalConference article

Silicon
Electric lines
Magnetorheological fluids
Surface roughness
Ground effect
2 Citations (Scopus)

Conductor roughness reduced low-loss coplanar waveguides on low resistivity silicon by employing magnetorheological finishing

Lee, S. N., Yook, J. G., Park, S. J., Lee, J. I., Kim, Y. J. & Lee, S. J., 2005 Dec 1, 2005 IEEE MTT-S International Microwave Symposium Digest. p. 2151-2154 4 p. 1517175. (IEEE MTT-S International Microwave Symposium Digest; vol. 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

magnetorheological fluids
Coplanar waveguides
roughness
conductors
Surface roughness
5 Citations (Scopus)

Development of in situ system to monitor the machining process using a piezo load cell

Kang, E. G., Park, S. J. & Lee, S. J., 2005 Apr 1, In : International Journal of Advanced Manufacturing Technology. 25, 7-8, p. 647-651 5 p.

Research output: Contribution to journalArticle

Machining
Dynamometers
Milling (machining)
Ball screws
Servomotors
2004
3 Citations (Scopus)

Conductor loss reduction for high frequency transmission lines based on magnetorheological fluid polishing method

Lee, S. N., Lee, J. I., Kim, W. B., Lim, C. H., Yook, J. G., Kim, Y. J. & Lee, S. J., 2004 Dec 1, Conference Proceedings- 34th European Microwave Conference. p. 165-168 4 p. (Conference Proceedings- European Microwave Conference; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnetorheological fluids
Polishing
Electric lines
Resonators
Electroplating
4 Citations (Scopus)

Conductor-loss reduction for high-frequency transmission lines based on the magnetorheological-fluid polishing method

Lee, S. N., Lee, J. I., Kim, W. B., Yook, J. G., Kim, Y. J. & Lee, S. J., 2004 Sep 5, In : Microwave and Optical Technology Letters. 42, 5, p. 405-407 3 p.

Research output: Contribution to journalArticle

Magnetorheological fluids
magnetorheological fluids
Polishing
polishing
transmission lines