If you made any changes in Pure these will be visible here soon.

Research Output 2002 2019

  • 764 Citations
  • 14 h-Index
  • 44 Article
  • 3 Conference contribution
  • 3 Paper
  • 1 Review article
2019
5 Citations (Scopus)

Comparison of lightweight aggregate and foamed concrete with the same density level using image-based characterizations

Chung, S. Y., Abd Elrahman, M., Kim, J. S., Han, T., Stephan, D. & Sikora, P., 2019 Jun 30, In : Construction and Building Materials. 211, p. 988-999 12 p.

Research output: Contribution to journalArticle

Concretes
Concrete aggregates
Insulation
Materials properties
Blowing agents
1 Citation (Scopus)

Construction of virtual interfacial transition zone (ITZ) samples of hydrated cement paste using extended stochastic optimization

Kim, S. Y., Kim, J. S., Kang, J. W. & Han, T., 2019 Sep 1, In : Cement and Concrete Composites. 102, p. 84-93 10 p.

Research output: Contribution to journalArticle

Ointments
Cements
Microstructure
Porosity
Stiffness
4 Citations (Scopus)

High tribology performance of Poly(vinylidene fluoride) composites based on three-dimensional mesoporous magnesium oxide nanosheets

Park, M. S., Sung, H. S., Park, C. H., Han, T. S. & Kim, J. H., 2019 Apr 15, In : Composites Part B: Engineering. 163, p. 224-235 12 p.

Research output: Contribution to journalArticle

Magnesium Oxide
Nanosheets
Tribology
Magnesia
Composite materials

Identifying significant earthquake intensity measures for evaluating seismic damage and fragility of nuclear power plant structures

Nguyen, D. D., Thusa, B., Han, T. S. & Lee, T. H., 2019 Jan 1, (Accepted/In press) In : Nuclear Engineering and Technology.

Research output: Contribution to journalArticle

Open Access
Nuclear power plants
Earthquakes
Seismic response
Shear deformation
Bearings (structural)
4 Citations (Scopus)

Issues on characterization of cement paste microstructures from μ-CT and virtual experiment framework for evaluating mechanical properties

Kim, J. S., Chung, S. Y., Stephan, D. & Han, T., 2019 Mar 30, In : Construction and Building Materials. 202, p. 82-102 21 p.

Research output: Contribution to journalArticle

Ointments
Cements
Mechanical properties
Microstructure
Experiments
cements
Ointments
Cements
mechanical properties
Mechanical properties
Tomography
Cements
Spatial distribution
High performance concrete
Volume fraction

Seismic Fragility Analysis of Base-Isolated LNG Storage Tank for Selecting Optimum Friction Material of Friction Pendulum System

Kim, J. S., Jung, J. P., Moon, J. H., Lee, T. H., Kim, J. H. & Han, T. S., 2019 Apr 1, In : Journal of Earthquake and Tsunami. 13, 2, 1950010.

Research output: Contribution to journalArticle

liquefied natural gas
storage tanks
Friction materials
storage tank
pendulums
2018

Alternative parameter to characterize pore distribution in cement paste, and its relation to mechanical properties

Han, T. S. & Kim, J. S., 2018 Jan 1, Computational Modelling of Concrete Structures - Proceedings of the conference on Computational Modelling of Concrete and Concrete Structures, EURO-C 2018. Pichler, B., Rots, J. G. & Meschke, G. (eds.). CRC Press/Balkema, p. 311-316 6 p. (Computational Modelling of Concrete Structures - Proceedings of the conference on Computational Modelling of Concrete and Concrete Structures, EURO-C 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mechanical Properties
Cements
Microstructure
Mechanical properties
Alternatives
11 Citations (Scopus)

Area of lineal-path function for describing the pore microstructures of cement paste and their relations to the mechanical properties simulated from μ-CT microstructures

Han, T., Zhang, X., Kim, J. S., Chung, S. Y., Lim, J. H. & Linder, C., 2018 May 1, In : Cement and Concrete Composites. 89, p. 1-17 17 p.

Research output: Contribution to journalArticle

Ointments
Cements
Mechanical properties
Microstructure
Stiffness
2 Citations (Scopus)

Badanie właściwości mechanicznych i mikrostruktury zaczynu cementowego z kulkami szklanymi z wykorzystaniem modelu faza - pole i funkcji ścieżki liniowej do opisu pękania

Translated title of the contribution: Investigation of mechanical properties and microstructure of cement paste with glass beads using crack phase field model and lineal-path functionHan, T. S., Chung, S. Y. & Kim, J. S., 2018 Jan 1, In : Cement, Wapno, Beton. 2018, 3, p. 239-250 12 p.

Research output: Contribution to journalArticle

Ointments
Cements
Cracks
Glass
Mechanical properties
7 Citations (Scopus)

Phase field modeling of crack propagation under combined shear and tensile loading with hybrid formulation

Jeong, H., Signetti, S., Han, T. & Ryu, S., 2018 Dec 1, In : Computational Materials Science. 155, p. 483-492 10 p.

Research output: Contribution to journalArticle

Phase Field
Crack Propagation
crack propagation
Crack propagation
shear

Sensitivity estimation of cement paste properties in the microstructural characteristics

Kim, J. S. & Han, T. S., 2018 Jan 1, Computational Modelling of Concrete Structures - Proceedings of the conference on Computational Modelling of Concrete and Concrete Structures, EURO-C 2018. Pichler, B., Rots, J. G. & Meschke, G. (eds.). CRC Press/Balkema, p. 141-148 8 p. (Computational Modelling of Concrete Structures - Proceedings of the conference on Computational Modelling of Concrete and Concrete Structures, EURO-C 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cements
Porosity
Probability distributions
Sensitivity analysis
Materials properties
2017
7 Citations (Scopus)
Composite materials
Ultrahigh molecular weight polyethylenes
Molding
Spectrometry
Wear resistance
2016
7 Citations (Scopus)

Effects of anisotropic voids on thermal properties of insulating media investigated using 3D printed samples

Chung, S. Y., Stephan, D., Elrahman, M. A. & Han, T. S., 2016 May 15, In : Construction and Building Materials. 111, p. 529-542 14 p.

Research output: Contribution to journalArticle

Thermodynamic properties
Thermal conductivity
Materials properties
3D printers
Insulating materials
28 Citations (Scopus)

Evaluation of effect of glass beads on thermal conductivity of insulating concrete using micro CT images and probability functions

Chung, S. Y., Han, T. S., Kim, S. Y., Jay Kim, J. H., Youm, K. S. & Lim, J. H., 2016 Jan 1, In : Cement and Concrete Composites. 65, p. 150-162 13 p.

Research output: Contribution to journalArticle

Tomography
Thermal conductivity
Concretes
Glass
Spatial distribution
13 Citations (Scopus)

Negative Poisson's ratio in cubic materials along principal directions

Ho, D. T., Park, S. D., Kwon, S. Y., Han, T. S. & Kim, S. Y., 2016 Jul 1, In : Physica Status Solidi (B) Basic Research. 253, 7, p. 1288-1294 7 p.

Research output: Contribution to journalArticle

Poisson ratio
Density functional theory
Direction compound
density functional theory
simulation
2015
1 Citation (Scopus)
space orientation
Crystal orientation
solid phases
Crystals
crystals

Evaluation of permeability of concrete specimens affected by chloride attack using reconstruction and probabilistic description methods

Chung, S. Y., Kim, S. Y., Kim, Y. W. & Han, T. S., 2015 Jan 1, IABSE Conference, Nara 2015: Elegance in Structures - Report. International Association for Bridge and Structural Engineering (IABSE), p. 274-275 2 p. (IABSE Conference, Nara 2015: Elegance in Structures - Report).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Concretes
Spatial distribution
Cements
Durability
X rays
22 Citations (Scopus)
Air permeability
Ointments
Numerical methods
Cements
Concretes
3 Citations (Scopus)

Spatial distribution of voids in insulating concrete analyzed by micro-CT images and probability functions

Chung, S. Y., Han, T. S. & Kim, Y. W., 2015 Jan 1, In : Advances in Materials Science and Engineering. 2015, 516169.

Research output: Contribution to journalArticle

Spatial distribution
Concretes
Heat conduction
Tomography
Thermal conductivity
4 Citations (Scopus)

The effect of transverse loading on the ideal tensile strength of face-centered-cubic materials

Tam Ho, D., Park, S. D., Kwon, S. Y., Han, T. S. & Youb Kim, S., 2015 Jul 1, In : EPL. 111, 2, 26005.

Research output: Contribution to journalArticle

tensile strength
phase transformations
damping
asymmetry
density functional theory
2014
3 Citations (Scopus)

Evaluation of hydraulic conductivity of reconstructed granular media generated using low-order probability functions

Yun, T. S., Han, T. S., Chung, S. Y. & Narsilio, G. A., 2014 Jan 1, In : KSCE Journal of Civil Engineering. 18, 1, p. 132-141 10 p.

Research output: Contribution to journalArticle

Hydraulic conductivity
Microstructure
Fluids
Porous materials
Navier Stokes equations
15 Citations (Scopus)

Investigation of the permeability of porous concrete reconstructed using probabilistic description methods

Chung, S. Y., Han, T. S., Kim, S. Y. & Lee, T. H., 2014 Sep 15, In : Construction and Building Materials. 66, p. 760-770 11 p.

Research output: Contribution to journalArticle

Concretes
Spatial distribution
Tomography
Physical properties
Experiments
2013
12 Citations (Scopus)

Correlation between low-order probability distribution functions and percolation of porous concrete

Chung, S. Y. & Han, T. S., 2013 Apr 1, In : Magazine of Concrete Research. 65, 7, p. 448-460 13 p.

Research output: Contribution to journalArticle

Probability distributions
Distribution functions
Concretes
Tomography
Hydraulic conductivity
1 Citation (Scopus)

Crystal stress distribution evolution of elastoplastically deforming polycrystals over crystal orientation space

Han, T. S., Chung, S. Y. & Lee, B., 2013 Apr 29, In : Computational Materials Science. 75, p. 9-17 9 p.

Research output: Contribution to journalArticle

space orientation
Polycrystal
Polycrystals
polycrystals
Stress Distribution

Effect of base isolation on seismic fragility of aboveground LNG storage tanks

Lee, T. H., Choi, W. S. & Han, T. S., 2013 Jan 1.

Research output: Contribution to conferencePaper

Liquefied natural gas
Concrete tanks
Earthquakes
Cracks
22 Citations (Scopus)

Evaluation of the anisotropy of the void distribution and the stiffness of lightweight aggregates using CT imaging

Chung, S. Y., Han, T. S., Yun, T. S. & Youm, K. S., 2013 Sep 2, In : Construction and Building Materials. 48, p. 998-1008 11 p.

Research output: Contribution to journalArticle

Tomography
Anisotropy
Stiffness
Imaging techniques
Probability distributions
61 Citations (Scopus)

Evaluation of thermal conductivity for thermally insulated concretes

Yun, T. S., Jeong, Y. J., Han, T. S. & Youm, K. S., 2013 Mar 25, In : Energy and Buildings. 61, p. 125-132 8 p.

Research output: Contribution to journalArticle

Thermal conductivity
Concretes
Glass
Thermal insulation
Energy resources

Evolution of crystal stress distribution on elastoplastic deformation of polycrystalline solids

Chung, S. Y. & Han, T. S., 2013 Jan 1.

Research output: Contribution to conferencePaper

Stress concentration
Crystals
Tensors
Single crystals
X ray diffraction
5 Citations (Scopus)

Reliability-based optimisation design of post-tensioned concrete box girder bridges considering pitting corrosion attack

Nguyen, V. S., Jeong, M. C., Han, T. & Kong, J. S., 2013 Jan 1, In : Structure and Infrastructure Engineering. 9, 1, p. 78-96 19 p.

Research output: Contribution to journalArticle

Box girder bridges
Concrete bridges
Prestressed concrete
Pitting
corrosion
2012
98 Citations (Scopus)

Blast-resistant characteristics of ultra-high strength concrete and reactive powder concrete

Yi, N. H., Kim, J. H. J., Han, T. S., Cho, Y. G. & Lee, J. H., 2012 Mar 1, In : Construction and Building Materials. 28, 1, p. 694-707 14 p.

Research output: Contribution to journalArticle

Powders
Concretes
Compressive strength
High performance concrete
Structural members
3 Citations (Scopus)
Plastic Deformation
Single Crystal
misalignment
plastic deformation
Plastic deformation
8 Citations (Scopus)

Development of satisfaction curves to evaluate concrete mix design performance using a Bayesian probabilistic method

Kim, J. H. J., Phan, H. D., Kim, B. Y., Choi, J. W. & Han, T. S., 2012 Feb 1, In : Construction and Building Materials. 27, 1, p. 578-584 7 p.

Research output: Contribution to journalArticle

Concrete mixtures
Seismic design
Cements
Water
Normal distribution
4 Citations (Scopus)
Polycrystals
polycrystals
Crystal lattices
Crystal orientation
Crystals
2011
37 Citations (Scopus)

Bending behavior, and evolution of texture and microstructure during differential speed warm rolling of AZ31B magnesium alloys

Cho, J. H., Kim, H. W., Kang, S. B. & Han, T. S., 2011 Aug 1, In : Acta Materialia. 59, 14, p. 5638-5651 14 p.

Research output: Contribution to journalArticle

Magnesium alloys
Textures
Microstructure
Shear bands
Texturing
2 Citations (Scopus)
Polycrystals
Linking
Stiffness
methodology
Finite Element
6 Citations (Scopus)

Simplified formulations for flutter instability analysis of bridge deck

Tan-Van, V., Kim, Y. M., Han, T. S. & Lee, H. E., 2011 Jul 1, In : Wind and Structures, An International Journal. 14, 4, p. 359-381 23 p.

Research output: Contribution to journalArticle

Flutter
Bridge decks
Eigenvalue Analysis
Formulation
Complex Analysis
2010
40 Citations (Scopus)

Load partitioning between single bulk grains in a two-phase duplex stainless steel during tensile loading

Hedström, P., Han, T. S., Lienert, U., Almer, J. & Odén, M., 2010 Jan 1, In : Acta Materialia. 58, 2, p. 734-744 11 p.

Research output: Contribution to journalArticle

Stainless Steel
Stainless steel
Austenite
Ferrite
Tensors
14 Citations (Scopus)
Probability function
Mechanical Behavior
solid phases
evaluation
Evaluation
2008
45 Citations (Scopus)

Measuring and modeling distributions of stress state in deforming polycrystals

Miller, M. P., Park, J. S., Dawson, P. R. & Han, T. S., 2008 Sep 1, In : Acta Materialia. 56, 15, p. 3927-3939 13 p.

Research output: Contribution to journalArticle

Polycrystals
Experiments
Tensors
Crystals
Synchrotrons
12 Citations (Scopus)

Out-of-plane buckling and design of X-bracing systems with discontinuous diagonals

Moon, J., Yoon, K. Y., Han, T. S. & Lee, H. E., 2008 Mar 1, In : Journal of Constructional Steel Research. 64, 3, p. 285-294 10 p.

Research output: Contribution to journalArticle

Buckling
Axial loads
Loads (forces)
Finite element method
2007
14 Citations (Scopus)

A two-scale deformation model for polycrystalline solids using a strongly-coupled finite element methodology

Han, T. S. & Dawson, P. R., 2007 Mar 1, In : Computer Methods in Applied Mechanics and Engineering. 196, 13-16, p. 2029-2043 15 p.

Research output: Contribution to journalArticle

methodology
Crystals
continuums
Parallel processing systems
crystals
2005
26 Citations (Scopus)

An accelerated methodology for the evaluation of critical properties in polyphase alloys

Dawson, P., Miller, M., Han, T. S. & Bernier, J., 2005 Jan 1, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 36, 7, p. 1627-1641 15 p.

Research output: Contribution to journalArticle

Equipment testing
Mechanical testing
Stiffness
methodology
evaluation
32 Citations (Scopus)

Lattice strain partitioning in a two-phase alloy and its redistribution upon yielding

Han, T. S. & Dawson, P. R., 2005 Sep 25, In : Materials Science and Engineering A. 405, 1-2, p. 18-33 16 p.

Research output: Contribution to journalArticle

Loads (forces)
Axial compression
compression tests
Neutron diffraction
Tensors
14 Citations (Scopus)

Representation of anisotropic phase morphology

Han, T. S. & Dawson, P. R., 2005 Mar 1, In : Modelling and Simulation in Materials Science and Engineering. 13, 2, p. 203-223 21 p.

Research output: Contribution to journalArticle

Contiguity
Volume fraction
Polynomials
Connectivity
polynomials
2004

A methodology for the accelerated evaluation of design properties

Dawson, P. R., Miller, M. P., Han, T. S. & Bernier, J. V., 2004 Dec 1, p. 655-656. 2 p.

Research output: Contribution to conferencePaper

Stiffness
Methodology
Evaluation
Dislocations (crystals)
Grain boundaries
39 Citations (Scopus)

Investigating the effect of grain interaction during plastic deformation of copper

Lienert, U., Han, T. S., Almer, J., Dawson, P. R., Leffers, T., Margulies, L., Nielsen, S. F., Poulsen, H. F. & Schmidt, S., 2004 Sep 6, In : Acta Materialia. 52, 15, p. 4461-4467 7 p.

Research output: Contribution to journalArticle

Copper
Plastic deformation
Polycrystals
Synchrotrons
Diffraction

Seismic analysis of reinforced concrete frame buildings using interface modeling

Han, T. S. & Billington, S. L., 2004 Aug 1, In : Journal of Structural Engineering. 130, 8, p. 1157-1168 12 p.

Research output: Contribution to journalArticle

Reinforced concrete
Steel
Hinges
Concretes
Constitutive models
2003
75 Citations (Scopus)

Simulation of Highly Ductile Fiber-Reinforced Cement-Based Composite Components Under Cyclic Loading

Han, T. S., Feenstra, P. H. & Billington, S. L., 2003 Nov 1, In : ACI Structural Journal. 100, 6, p. 749-757 9 p.

Research output: Contribution to journalArticle

Cements
Fibers
Composite materials
Constitutive models
Retrofitting