Find Research outputs

Search results

• Design and evaluation of random linear network coding accelerators on FPGAs

  Kim, S., Jeong, W. S., Ro, W. W. & Gaudiot, J. L., 2013 Aug, In: Transactions on Embedded Computing Systems. 13, 1, 13.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• Design and evaluation of routing schemes for dependable real-time connections

  Kim, S., Qiao, D., Kodase, S. & Shin, K. G., 2001, Proceedings of the International Conference on Dependable Systems and Networks. Young, D. C. & Young, D. C. (eds.). p. 285-294 10 p. (Proceedings of the International Conference on Dependable Systems and Networks).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Design and evaluation of single nozzle with a non-conductive tip for reducing applied voltage and pattern width in electrohydrodynamic jet printing (EHDP)

  Kim, S. Y., Kim, Y., Park, J. & Hwang, J., 2010, In: Journal of Micromechanics and Microengineering. 20, 5, 055009.

  Research output: Contribution to journal › Article › peer-review
  20 Citations (Scopus)

• Design and evaluation of textile-based signal transmission lines and keypads for smart wear

  Cho, J., Moon, J., Sung, M., Jeong, K. & Cho, G., 2007, Human-Computer Interaction: Interaction Platforms and Techniques - 12th International Conference, HCI International 2007, Proceedings. PART 2 ed. Springer Verlag, p. 1078-1085 8 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4551 LNCS, no. PART 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  16 Citations (Scopus)

• Design and evaluation of wafer level UV-imprinted aspherical square microlens array to increase ray convergence efficiency of image sensor

  Kim, S. M., Min, J. H., Lim, J., Choi, M., Han, G. & Kang, S., 2008 Aug 22, In: Japanese journal of applied physics. 47, 8 PART 2, p. 6667-6671 5 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Design and Experimental Evaluation on kA-Class HTS Binary Superconducting Current Lead Using a Liquid Nitrogen Bath under Short-Term Current Test

  Kim, H. J., Lee, T. S., Kim, J. & Ko, T. K., 2014 Jun 1, In: IEEE Transactions on Applied Superconductivity. 24, 3, 6675757.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Design and experimental validation of performance for a maglev moving-magnet-type synchronous PM planar motor

  Choi, J. H., Park, J. H. & Baek, Y. S., 2006 Oct, In: IEEE Transactions on Magnetics. 42, 10, p. 3419-3421 3 p.

  Research output: Contribution to journal › Article › peer-review
  12 Citations (Scopus)

• Design and experimental validation of performance for a Maglev moving-magnet-type synchronous PM planar motor

  Choi, J., Park, J. & Baek, Y., 2006, INTERMAG 2006 - IEEE International Magnetics Conference. p. 191 1 p. 4261625. (INTERMAG 2006 - IEEE International Magnetics Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and experiments of a near-field optical disk head for very high efficiency

  Goto, K., Kirigaya, T., Masuda, Y., Kim, Y. J., Miyamoto, Y. & Arai, S., 2004, In: Scanning. 26, 5 SUPPL., p. I68-I72

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Design and fabrication of a diffractive optical element for the objective lens of a small form factor optical data storage device

  Lim, J., Jeong, G. B., Kim, S. M., Han, J., Yoo, J. M., Park, N. C. & Kang, S., 2006 Jan 1, In: Journal of Micromechanics and Microengineering. 16, 1, p. 77-82 6 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Design and fabrication of a large-area superhydrophobic metal surface with anti-icing properties engineered using a top-down approach

  Jung, M., Kim, T., Kim, H., Shin, R., Lee, J., Lee, J., Lee, J. & Kang, S., 2015 Oct 1, In: Applied Surface Science. 351, p. 920-926 7 p.

  Research output: Contribution to journal › Article › peer-review
  28 Citations (Scopus)

• Design and fabrication of a metallic nanostamp using UV nanoimprinting and electroforming for replicating discrete track media with feature size of 35 nm

  Lim, J., Hong, H. G., Han, J., Cho, E., Kim, Y. J., Hatano, H. & Arai, N., 2013 Jan, In: Journal of Vacuum Science and Technology B:Nanotechnology and Microelectronics. 31, 1, 011801.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design and fabrication of an artificial cornea based on a photolithographically patterned hydrogel construct

  Myung, D., Koh, W., Bakri, A., Zhang, F., Marshall, A., Ko, J., Noolandi, J., Carrasco, M., Cochran, J. R., Frank, C. W. & Ta, C. N., 2007 Dec, In: Biomedical Microdevices. 9, 6, p. 911-922 12 p.

  Research output: Contribution to journal › Article › peer-review
  96 Citations (Scopus)

• Design and fabrication of an optomechanical uncooled infrared imaging system

  Zhao, Y., Yamaguchi, J., Choi, J., Morales, S., Horowitz, R., Majumdar, A., Norton, P., Kitching, J., Li, H. & Athavale, M., 2001, In: American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. 369, 1, p. 367-370 4 p.

  Research output: Contribution to journal › Conference article › peer-review

• Design and fabrication of a novel Bimorph microoptomechanical sensor

  Lim, S. H., Choi, J., Horowitz, R. & Majumdar, A., 2005 Aug, In: Journal of Microelectromechanical Systems. 14, 4, p. 683-690 8 p.

  Research output: Contribution to journal › Article › peer-review
  42 Citations (Scopus)

• Design and fabrication of a reconfigurable frequency selective surface using fluidic channels

  Son, D. C., Shin, H., Kim, Y. J., Hong, I. P., Chun, H. J. & Park, Y. B., 2017 Nov, In: Journal of Electrical Engineering and Technology. 12, 6, p. 2342-2347 6 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Design and fabrication of a single membrane push-pull SPDT RF MEMS switch operated by electromagnetic actuation and electrostatic hold

  Cho, I. J. & Yoon, E., 2010, In: Journal of Micromechanics and Microengineering. 20, 3, 035028.

  Research output: Contribution to journal › Article › peer-review
  37 Citations (Scopus)

• Design and fabrication of a Si PIN-type radiation detector for alpha spectroscopy

  Kim, H. S., Park, S. H., Ha, J. H., Cho, S. Y. & Park, K. S., 2009 Aug, In: Journal of the Korean Physical Society. 55, 2, p. 454-458 5 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Design and fabrication of aspheric microlens array for optical read-only-memory card system

  Kim, H., Jeong, G., Kim, Y. J. & Kang, S., 2006 Aug 22, In: Japanese Journal of Applied Physics. 45, 8 B, p. 6708-6712 5 p.

  Research output: Contribution to journal › Article › peer-review

• Design and fabrication of detector module for UFFO Burst Alert & Trigger telescope

  Jung, A., Ahmad, S., Ahn, K. B., Barrillon, P., Blin-Bondil, S., Brandt, S., Budtz-Jørgensen, C., Castrotirado, A. J., Chen, P., Choi, H. S., Choi, Y. J., Connell, P., Dagoret-Campagne, S., De La Taille, C., Eyles, C., Grossan, B., Hermann, I., Huang, M. H. A., Jeong, S., Kim, J. E. & 22 others, Kim, S. W., Kim, Y. W., Lee, J., Lim, H., Linder, E. V., Liu, T. C., Lund, N., Min, K. W., Na, G. W., Nam, J. W., Nam, K. H., Panasyuk, M. I., Park, I. H., Reglero, V., Rodrigo, J. M., Smoot, G. F., Suh, Y. D., Svertilov, S., Vedenkin, N., Wang, M. Z., Yashin, I. & Zhao, M. H., 2011, p. 235-238. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  4 Citations (Scopus)

• Design and fabrication of diffractive optical elements by use of gray-scale photolithography

  Sohn, J. S., Lee, M. B., Kim, W. C., Cho, E. H., Kim, T. W., Yoon, C. Y., Park, N. C. & Park, Y. P., 2005 Feb 1, In: Applied Optics. 44, 4, p. 506-511 6 p.

  Research output: Contribution to journal › Article › peer-review
  20 Citations (Scopus)

• Design and fabrication of label-free biochip using a guided mode resonance filter with nano grating structures by injection molding process

  Cho, E., Kim, B., Choi, S., Han, J., Jin, J., Han, J., Lim, J., Heo, Y., Kim, S., Sung, G. Y. & Kang, S., 2011 Jan, In: Journal of Nanoscience and Nanotechnology. 11, 1, p. 417-421 5 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Design and fabrication of metal PCB based on the patterned anodizing for improving thermal dissipation of LED lighting

  Lee, M. H., Lee, T. J., Lee, H. J. & Kim, Y. J., 2010, International Microsystems Packaging Assembly and Circuits Technology Conference, IMPACT 2010 and International 3D IC Conference, Proceedings. 5699479. (International Microsystems Packaging Assembly and Circuits Technology Conference, IMPACT 2010 and International 3D IC Conference, Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• Design and fabrication of microlens array for VCSEL to fiber coupling; Technical Digest

  Kim, S. M., Kim, H., Lim, J., Han, J. & Kang, S., 2005, Optifab 2005: Technical Digest. SPIE, p. 93-96 4 p. 103150S. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10315).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and fabrication of microlens illuminated aperture array for optical ROM card system

  Kim, H., Lee, J., Lim, J., Kim, S. M., Kang, S., Hendriks, R., Kastelijn, A. & Busch, C., 2005, International Symposium on Optical Memory and Optical Data Storage, ISOM_ODS 2005. Optical Society of America (OSA), (Optics InfoBase Conference Papers).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and fabrication of microlens illuminated aperture array for optical ROM card system

  Kim, H., Lee, J., Lim, J., Kim, S. M., Kang, S., Hendriks, R., Kastelijn, A. & Busch, C., 2005 Jan 1, International Symposium on Optical Memory and Optical Data Storage, ISOM_ODS 2005. Optical Society of America, (Optics InfoBase Conference Papers).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and fabrication of micromachined internal combustion engine as a power source for microsystems

  Park, D. E., Lee, D. H., Yoon, J. B., Kwon, S. & Yoon, E., 2002, p. 272-275. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  14 Citations (Scopus)

• Design and fabrication of micro optical components for optical data storage by micromolding

  Kang, S. & Moon, S. D., 2001, p. II16-II17.

  Research output: Contribution to conference › Paper › peer-review
  5 Citations (Scopus)

• Design and fabrication of micro optical film by ultraviolet roll imprinting

  Ahn, S., Choi, M., Bae, H., Lim, J., Myung, H., Kim, H. & Kang, S., 2007 Aug 23, In: Japanese Journal of Applied Physics. 46, 8 B, p. 5478-5484 7 p.

  Research output: Contribution to journal › Article › peer-review
  26 Citations (Scopus)

• Design and fabrication of multi-aperture plate for multi-ion beam patterning system

  Choi, Y., Kim, T. G., Han, J., Min, B. K., Kim, Y. J. & Lee, S. J., 2010 Jun, In: Japanese journal of applied physics. 49, 6 PART 2, p. 06GE061-06GE064

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Design and fabrication of permanent mode magnet by using coated conductor

  Lee, H. G., Kim, J. G., Lee, S. W., Kim, W. S., Lee, S. W., Choi, K. D., Hong, G. W. & Ko, T. K., 2006 Oct 1, In: Physica C: Superconductivity and its applications. 445-448, 1-2, p. 1099-1102 4 p.

  Research output: Contribution to journal › Article › peer-review
  32 Citations (Scopus)

• Design and fabrication of perpendicular patterned magnetic media using nanoimprinted nano pillar patterns

  Han, J., Yang, J. M., Shin, S. C., Kim, Y. J. & Kang, S., 2009 May, In: IEEE Transactions on Magnetics. 45, 5, p. 2288-2291 4 p., 4816014.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• Design and fabrication of semi-transparent screen based on micro-patterns for direct-view type head-up display in automobiles

  Lee, J. Y., Kim, H. J. & Kim, Y. J., 2016 Feb 1, In: Optical Review. 23, 1, p. 133-140 8 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Design and fabrication of semi-transparent screen using micro patterns and metal coating for head-up display

  Lee, J. Y., Hong, H. G. & Kim, Y. J., 2013, Technical Digest of the 18th Microoptics Conference, MOC 2013. 6715066. (Technical Digest of the 18th Microoptics Conference, MOC 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and fabrication of tungsten carbide mould with micro patterns imprinted by micro lithography

  Choi, W., Lee, J., Kim, W. B., Min, B. K., Kang, S. & Lee, S. J., 2004 Nov, In: Journal of Micromechanics and Microengineering. 14, 11, p. 1519-1525 7 p.

  Research output: Contribution to journal › Article › peer-review
  26 Citations (Scopus)

• Design and implementation of a contactless palm print and palm vein sensor

  Michael, G. K. O., Connie, T. & Jin, A. T. B., 2010, 11th International Conference on Control, Automation, Robotics and Vision, ICARCV 2010. p. 1268-1273 6 p. 5707951. (11th International Conference on Control, Automation, Robotics and Vision, ICARCV 2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  31 Citations (Scopus)

• Design and implementation of a contactless palm vein recognition system

  Michael, G. K. O., Connie, T., Hoe, L. S. & Jin, A. T. B., 2010, Proceedings of Symposium on Information and Communication Technology, SoICT2010. p. 92-99 8 p. (ACM International Conference Proceeding Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  11 Citations (Scopus)

• Design and implementation of a dynamic communication MPI library for the grid

  Park, K. L., Lee, H. J., Kwon, O. Y., Park, S. Y., Park, H. W. & Kim, S. D., 2004, In: International Journal of Computers and Applications. 26, 3, p. 165-172 8 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Design and implementation of a high data rate MICS digital baseband transmitter

  Im, J., Lee, S. & Kim, J., 2011, 2011 IEEE Workshop on Signal Processing Systems, SiPS 2011, Proceedings. p. 13-18 6 p. 6088942. (2011 IEEE Workshop on Signal Processing Systems, SiPS 2011, Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Design and implementation of AISG modem for antenna line device

  Lee, Y. S., Kim, H. S., Seo, H. M., Park, W. C., Kim, S. D. & Kim, D. K., 2011, Proceedings - 1st ACIS/JNU International Conference on Computers, Networks, Systems, and Industrial Engineering, CNSI 2011. p. 314-319 6 p. 5954333. (Proceedings - 1st ACIS/JNU International Conference on Computers, Networks, Systems, and Industrial Engineering, CNSI 2011).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and implementation of a six sigma game to develop entrepreneurship in engineering students

  Sohn, S. Y. & Ju, Y., 2015, In: International Journal of Engineering Education. 31, 2, p. 661-673 13 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design and Implementation of a WLAN/CDMA2000 Interworking Architecture

  Buddhikot, M. M., Chandranmenon, G., Han, S., Lee, Y. W., Miller, S. & Salgarelli, L., 2003 Nov, In: IEEE Communications Magazine. 41, 11, p. 90-100 11 p.

  Research output: Contribution to journal › Article › peer-review
  179 Citations (Scopus)

• Design and implementation of biomedical SoC for implantable cardioverter defibrillators

  Kim, K., Cho, U., Jung, Y. & Kim, J., 2007, 2007 IEEE Asian Solid-State Circuits Conference, A-SSCC. p. 248-251 4 p. 4425777. (2007 IEEE Asian Solid-State Circuits Conference, A-SSCC).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Design and implementation of electronics and data acquisition system for Ultra-Fast Flash Observatory

  Jung, A., Ahmad, S., Barrillon, P., Brandt, S., Budtz-Jørgensen, C., Castro-Tirado, A. J., Chang, S. H., Chang, Y. Y., Chen, C. R., Chen, P., Choi, H. S., Choi, Y. J., Connell, P., Dagoret-Campagne, S., Eyles, C., Grossan, B., Huang, J. J., Huang, M. H. A., Jeong, S., Kim, J. E. & 24 others, Kim, M., Kim, S. W., Kim, Y. W., Krasnov, A. S., Lee, J., Lim, H., Lin, C. Y., Linder, E. V., Liu, T. C., Lund, N., Nam, J. W., Min, K. W., Na, G. W., Panasyuk, M. I., Park, I. H., Reglero, V., Ripa, J., Rodrigo, J. M., Smoot, G. F., Suh, J. E., Svertilov, S., Vedenkin, N., Wang, M. Z. & Yashin, I., 2013, In: EAS Publications Series. 61, p. 567-571 5 p.

  Research output: Contribution to journal › Conference article › peer-review

• Design and implementation of label-type UHF RFID tags for the metallic object application

  Koo, T. W., Kim, D., Ryu, J. I., Kim, J. K., Yook, J. G. & Kim, J. C., 2010, 2010 IEEE International Symposium on Antennas and Propagation and CNC-USNC/URSI Radio Science Meeting - Leading the Wave, AP-S/URSI 2010. 5561176. (2010 IEEE International Symposium on Antennas and Propagation and CNC-USNC/URSI Radio Science Meeting - Leading the Wave, AP-S/URSI 2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Design and implementation of MB-OFDM UWB modem

  Kim, D., Lim, Y., Cho, J. & Lee, C., 2011, 2011 IEEE International Conference on Consumer Electronics, ICCE 2011. p. 419-420 2 p. 5722660. (Digest of Technical Papers - IEEE International Conference on Consumer Electronics).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and implementation of MIMO-OFDM baseband processor for high-speed wireless LANs

  Jung, Y., Kim, J., Lee, S., Yoon, H. & Kim, J., 2007 Jul 7, In: IEEE Transactions on Circuits and Systems II: Express Briefs. 54, 7, p. 631-635 5 p.

  Research output: Contribution to journal › Article › peer-review
  36 Citations (Scopus)

• Design and implementation of power management circuit for semi-active RFID tags

  Kim, Y., Yi, K., Cho, S., Nam, K. & Kim, S., 2010 Oct, In: Transactions of the Korean Institute of Electrical Engineers. 59, 10, p. 1839-1844 6 p.

  Research output: Contribution to journal › Article › peer-review

• Design and implementation of real-time software radio for anti-interference GPS/WAAS sensors

  Chen, Y. H., Juang, J. C., Seo, J., Lo, S., Akos, D. M., Lorenzo, D. S. & Enge, P., 2012 Oct, In: Sensors (Switzerland). 12, 10, p. 13417-13440 24 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  54 Citations (Scopus)

• Design and implementation of sensor-based tool-wear monitoring systems

  Leem, C. S. & Dornfeld, D. A., 1996 Jul, In: Mechanical Systems and Signal Processing. 10, 4, p. 439-458 20 p.

  Research output: Contribution to journal › Article › peer-review
  18 Citations (Scopus)