A POI-based RFID reader deployment and associated interference effect

Donghun An, Hoongee Yang, Sunghyun Yang, Youngsoo Kim, Jonggwan Yook, Bongsoon Kang

Research output: Contribution to journalArticle

Abstract

This paper presents a simulation based method to predict the amount of frequency interference in a passive type RFID system. To judge occurrence of frequency interference, we use a parameter POI (probability of interference) that depends on several factors such as multiple access method, emission mask, the number of channel, etc. Due to its dependence on several factors, a Monte-carlo based simulation is suitably used. Through the simulation, we draw minimum separation distance between two readers and examine performance degradation due to aggregate interfering readers. Moreover, we present a reader deployment strategy based on the average POI of active readers operating in some area.

Original languageEnglish
Pages (from-to)700-703
Number of pages4
JournalIEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences
VolumeE91-A
Issue number2
DOIs
Publication statusPublished - 2008 Jan 1

Fingerprint

Radio Frequency Identification
Radio frequency identification (RFID)
Interference
Masks
Degradation
Simulation
Multiple Access
Mask
Predict

All Science Journal Classification (ASJC) codes

  • Signal Processing
  • Computer Graphics and Computer-Aided Design
  • Electrical and Electronic Engineering
  • Applied Mathematics

Cite this

An, Donghun ; Yang, Hoongee ; Yang, Sunghyun ; Kim, Youngsoo ; Yook, Jonggwan ; Kang, Bongsoon. / A POI-based RFID reader deployment and associated interference effect. In: IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences. 2008 ; Vol. E91-A, No. 2. pp. 700-703.
@article{3f351f6b282646e98b86686ef97ca386,
title = "A POI-based RFID reader deployment and associated interference effect",
abstract = "This paper presents a simulation based method to predict the amount of frequency interference in a passive type RFID system. To judge occurrence of frequency interference, we use a parameter POI (probability of interference) that depends on several factors such as multiple access method, emission mask, the number of channel, etc. Due to its dependence on several factors, a Monte-carlo based simulation is suitably used. Through the simulation, we draw minimum separation distance between two readers and examine performance degradation due to aggregate interfering readers. Moreover, we present a reader deployment strategy based on the average POI of active readers operating in some area.",
author = "Donghun An and Hoongee Yang and Sunghyun Yang and Youngsoo Kim and Jonggwan Yook and Bongsoon Kang",
year = "2008",
month = "1",
day = "1",
doi = "10.1093/ietfec/e91-a.2.700",
language = "English",
volume = "E91-A",
pages = "700--703",
journal = "IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences",
issn = "0916-8508",
publisher = "Maruzen Co., Ltd/Maruzen Kabushikikaisha",
number = "2",

}

A POI-based RFID reader deployment and associated interference effect. / An, Donghun; Yang, Hoongee; Yang, Sunghyun; Kim, Youngsoo; Yook, Jonggwan; Kang, Bongsoon.

In: IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, Vol. E91-A, No. 2, 01.01.2008, p. 700-703.

Research output: Contribution to journalArticle

TY - JOUR

T1 - A POI-based RFID reader deployment and associated interference effect

AU - An, Donghun

AU - Yang, Hoongee

AU - Yang, Sunghyun

AU - Kim, Youngsoo

AU - Yook, Jonggwan

AU - Kang, Bongsoon

PY - 2008/1/1

Y1 - 2008/1/1

N2 - This paper presents a simulation based method to predict the amount of frequency interference in a passive type RFID system. To judge occurrence of frequency interference, we use a parameter POI (probability of interference) that depends on several factors such as multiple access method, emission mask, the number of channel, etc. Due to its dependence on several factors, a Monte-carlo based simulation is suitably used. Through the simulation, we draw minimum separation distance between two readers and examine performance degradation due to aggregate interfering readers. Moreover, we present a reader deployment strategy based on the average POI of active readers operating in some area.

AB - This paper presents a simulation based method to predict the amount of frequency interference in a passive type RFID system. To judge occurrence of frequency interference, we use a parameter POI (probability of interference) that depends on several factors such as multiple access method, emission mask, the number of channel, etc. Due to its dependence on several factors, a Monte-carlo based simulation is suitably used. Through the simulation, we draw minimum separation distance between two readers and examine performance degradation due to aggregate interfering readers. Moreover, we present a reader deployment strategy based on the average POI of active readers operating in some area.

UR - http://www.scopus.com/inward/record.url?scp=77951186916&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77951186916&partnerID=8YFLogxK

U2 - 10.1093/ietfec/e91-a.2.700

DO - 10.1093/ietfec/e91-a.2.700

M3 - Article

AN - SCOPUS:77951186916

VL - E91-A

SP - 700

EP - 703

JO - IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences

JF - IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences

SN - 0916-8508

IS - 2

ER -