Abstract
A novel technique for achieving noise shaping in oversampled converters is proposed. It uses the adaptive algorithm to minimize the mean square quantization error. The circuit implementation looks like a sigma-delta modulator and requires limited additional circuits for the necessary multipliers. Simulation results, confirmed by experimental measurements, show that more than 15dB in the SNR are gained with respect to an equivalent sigma-delta counterpart in the low signal level range.
| Original language | English |
|---|---|
| Article number | 1471255 |
| Pages (from-to) | 236-239 |
| Number of pages | 4 |
| Journal | European Solid-State Circuits Conference |
| Publication status | Published - 2000 Dec 1 |
| Event | 26th European Solid-State Circuits Conference, ESSCIRC 2000 - Stockholm, Sweden Duration: 2000 Sep 19 → 2000 Sep 21 |
Fingerprint
All Science Journal Classification (ASJC) codes
- Hardware and Architecture
- Electrical and Electronic Engineering
Cite this
}
Adaptive noise shaping ADC based on LMS algorithm. / Koh, Jinseok; Han, Gunhee; Embabi, Sherif H.K.; Maloberti, Franco.
In: European Solid-State Circuits Conference, 01.12.2000, p. 236-239.Research output: Contribution to journal › Conference article
TY - JOUR
T1 - Adaptive noise shaping ADC based on LMS algorithm
AU - Koh, Jinseok
AU - Han, Gunhee
AU - Embabi, Sherif H.K.
AU - Maloberti, Franco
PY - 2000/12/1
Y1 - 2000/12/1
N2 - A novel technique for achieving noise shaping in oversampled converters is proposed. It uses the adaptive algorithm to minimize the mean square quantization error. The circuit implementation looks like a sigma-delta modulator and requires limited additional circuits for the necessary multipliers. Simulation results, confirmed by experimental measurements, show that more than 15dB in the SNR are gained with respect to an equivalent sigma-delta counterpart in the low signal level range.
AB - A novel technique for achieving noise shaping in oversampled converters is proposed. It uses the adaptive algorithm to minimize the mean square quantization error. The circuit implementation looks like a sigma-delta modulator and requires limited additional circuits for the necessary multipliers. Simulation results, confirmed by experimental measurements, show that more than 15dB in the SNR are gained with respect to an equivalent sigma-delta counterpart in the low signal level range.
UR - http://www.scopus.com/inward/record.url?scp=84893723269&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84893723269&partnerID=8YFLogxK
M3 - Conference article
SP - 236
EP - 239
JO - European Solid-State Circuits Conference
JF - European Solid-State Circuits Conference
SN - 1930-8833
M1 - 1471255
ER -