An efficient multimode quantized precoding technique for MIMO wireless systems

Myeongcheol Shin, Sangheon Kim, Jiwon Kang, Chungyong Lee

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

Multimode quantized precoding (QP) can provide full diversity gain or high capacity gain by adapting the number of substreams, as well as the precoding matrix, according to the instantaneous channel condition with low-rate feedback. Conventional multimode QP (MM-QP), however, does not consider the adaptive rate allocation among substreams; thus, it cannot have the additional gain by adaptive modulation. Furthermore, it is computationally complex since exhaustive matrix inversions are required to determine the optimal mode. In this paper, we propose an efficient MM-QP system that improves the performance of a conventional system in terms of error rate and has a lower computational complexity than the conventional system. First, we define the rate-partitioning vector as the mode and control the rate among substreams and the number of substreams according to the channel instantaneous condition. Second, to reduce the computational complexity for the receiver to determine the optimal mode, the simplified mode-selection technique using estimates of the modal metric is proposed. In the proposed mode-selection technique, the optimal mode can be obtained by several multiplication and division operations. Finally, the mode-reduction technique eliminating the less-frequently used modes is proposed, which leads to a significant reduction of the feedback information with negligible performance loss. In numerical experiments, it was verified that the proposed MM-QP system gives a better error-rate performance than the conventional system, with much less computational complexity for the same amount of feedback information.

Original languageEnglish
Pages (from-to)733-743
Number of pages11
JournalIEEE Transactions on Vehicular Technology
Volume58
Issue number2
DOIs
Publication statusPublished - 2009 Mar 9

Fingerprint

Precoding
MIMO systems
Multiple-input multiple-output (MIMO)
Computational complexity
Feedback
Computational Complexity
Adaptive modulation
Instantaneous
Error Rate
Adaptive Modulation
Diversity Gain
Matrix Inversion
Low Complexity
Partitioning
Division
Multiplication
Receiver
Numerical Experiment
Metric
Experiments

All Science Journal Classification (ASJC) codes

  • Automotive Engineering
  • Aerospace Engineering
  • Electrical and Electronic Engineering
  • Applied Mathematics

Cite this

Shin, Myeongcheol ; Kim, Sangheon ; Kang, Jiwon ; Lee, Chungyong. / An efficient multimode quantized precoding technique for MIMO wireless systems. In: IEEE Transactions on Vehicular Technology. 2009 ; Vol. 58, No. 2. pp. 733-743.
@article{462dd6667d634adc9fdaaefe916f6592,
title = "An efficient multimode quantized precoding technique for MIMO wireless systems",
abstract = "Multimode quantized precoding (QP) can provide full diversity gain or high capacity gain by adapting the number of substreams, as well as the precoding matrix, according to the instantaneous channel condition with low-rate feedback. Conventional multimode QP (MM-QP), however, does not consider the adaptive rate allocation among substreams; thus, it cannot have the additional gain by adaptive modulation. Furthermore, it is computationally complex since exhaustive matrix inversions are required to determine the optimal mode. In this paper, we propose an efficient MM-QP system that improves the performance of a conventional system in terms of error rate and has a lower computational complexity than the conventional system. First, we define the rate-partitioning vector as the mode and control the rate among substreams and the number of substreams according to the channel instantaneous condition. Second, to reduce the computational complexity for the receiver to determine the optimal mode, the simplified mode-selection technique using estimates of the modal metric is proposed. In the proposed mode-selection technique, the optimal mode can be obtained by several multiplication and division operations. Finally, the mode-reduction technique eliminating the less-frequently used modes is proposed, which leads to a significant reduction of the feedback information with negligible performance loss. In numerical experiments, it was verified that the proposed MM-QP system gives a better error-rate performance than the conventional system, with much less computational complexity for the same amount of feedback information.",
author = "Myeongcheol Shin and Sangheon Kim and Jiwon Kang and Chungyong Lee",
year = "2009",
month = "3",
day = "9",
doi = "10.1109/TVT.2008.925303",
language = "English",
volume = "58",
pages = "733--743",
journal = "IEEE Transactions on Vehicular Technology",
issn = "0018-9545",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "2",

}

An efficient multimode quantized precoding technique for MIMO wireless systems. / Shin, Myeongcheol; Kim, Sangheon; Kang, Jiwon; Lee, Chungyong.

In: IEEE Transactions on Vehicular Technology, Vol. 58, No. 2, 09.03.2009, p. 733-743.

Research output: Contribution to journalArticle

TY - JOUR

T1 - An efficient multimode quantized precoding technique for MIMO wireless systems

AU - Shin, Myeongcheol

AU - Kim, Sangheon

AU - Kang, Jiwon

AU - Lee, Chungyong

PY - 2009/3/9

Y1 - 2009/3/9

N2 - Multimode quantized precoding (QP) can provide full diversity gain or high capacity gain by adapting the number of substreams, as well as the precoding matrix, according to the instantaneous channel condition with low-rate feedback. Conventional multimode QP (MM-QP), however, does not consider the adaptive rate allocation among substreams; thus, it cannot have the additional gain by adaptive modulation. Furthermore, it is computationally complex since exhaustive matrix inversions are required to determine the optimal mode. In this paper, we propose an efficient MM-QP system that improves the performance of a conventional system in terms of error rate and has a lower computational complexity than the conventional system. First, we define the rate-partitioning vector as the mode and control the rate among substreams and the number of substreams according to the channel instantaneous condition. Second, to reduce the computational complexity for the receiver to determine the optimal mode, the simplified mode-selection technique using estimates of the modal metric is proposed. In the proposed mode-selection technique, the optimal mode can be obtained by several multiplication and division operations. Finally, the mode-reduction technique eliminating the less-frequently used modes is proposed, which leads to a significant reduction of the feedback information with negligible performance loss. In numerical experiments, it was verified that the proposed MM-QP system gives a better error-rate performance than the conventional system, with much less computational complexity for the same amount of feedback information.

AB - Multimode quantized precoding (QP) can provide full diversity gain or high capacity gain by adapting the number of substreams, as well as the precoding matrix, according to the instantaneous channel condition with low-rate feedback. Conventional multimode QP (MM-QP), however, does not consider the adaptive rate allocation among substreams; thus, it cannot have the additional gain by adaptive modulation. Furthermore, it is computationally complex since exhaustive matrix inversions are required to determine the optimal mode. In this paper, we propose an efficient MM-QP system that improves the performance of a conventional system in terms of error rate and has a lower computational complexity than the conventional system. First, we define the rate-partitioning vector as the mode and control the rate among substreams and the number of substreams according to the channel instantaneous condition. Second, to reduce the computational complexity for the receiver to determine the optimal mode, the simplified mode-selection technique using estimates of the modal metric is proposed. In the proposed mode-selection technique, the optimal mode can be obtained by several multiplication and division operations. Finally, the mode-reduction technique eliminating the less-frequently used modes is proposed, which leads to a significant reduction of the feedback information with negligible performance loss. In numerical experiments, it was verified that the proposed MM-QP system gives a better error-rate performance than the conventional system, with much less computational complexity for the same amount of feedback information.

UR - http://www.scopus.com/inward/record.url?scp=61449188323&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=61449188323&partnerID=8YFLogxK

U2 - 10.1109/TVT.2008.925303

DO - 10.1109/TVT.2008.925303

M3 - Article

AN - SCOPUS:61449188323

VL - 58

SP - 733

EP - 743

JO - IEEE Transactions on Vehicular Technology

JF - IEEE Transactions on Vehicular Technology

SN - 0018-9545

IS - 2

ER -