An experimental-numerical methodology for a rapid prototyped application combined with finite element models in vertebral trabecular bone

D. G. Woo, C. H. Kim, Hansung Kim, D. Lim

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

In the present study, a novel evaluation method involving rapid prototyped (RP) technology and finite element (FE) analysis was used to study the elastic mechanical characteristics of human vertebral trabecular bone. Three-dimensional (3D) geometries of the RP and FE models were obtained from the central area of vertebral bones of female cadavers, age 70 and 85. RP and FE models were generated from the same high-resolution micro-computed tomography (μCT) scan data. We utilized RP technology along with FE analysis based on μCT for high-resolution vertebral trabecular bone specimens. RP models were used to fabricate complex 3D objects of vertebral trabecular bone that were created in a fused deposition modeling machine. RP models of vertebral trabecular bone are advantageous, particularly considering the repetition, risks, and ethical issues involved in using real bone from cadaveric specimens. A cubic specimen with a side length of 6.5 mm or a cylindrical specimen with a 7 mm diameter and 5 mm length proved better than a universal cubic specimen with a side length of 4 mm for the evaluation of elastic mechanical characteristics of vertebral trabecular bones through experimental and simulated compression tests. The results from the experimental compression tests of RP models closely matched those predicted by the FE models, and thus provided substantive corroboration of all three approaches (experimental tests using RP models and simulated tests using FE models with ABS and trabecular bone material properties). The RP technique combined with FE analysis has potential for widespread biomechanical use, such as the fabrication of dummy human skeleton systems for the investigation of elastic mechanical characteristics of various bones.

Original languageEnglish
Title of host publicationProceedings of the Society for Experimental Mechanics, Inc.
Pages657-664
Number of pages8
Publication statusPublished - 2008 Dec 1

Publication series

NameProceedings of the Society for Experimental Mechanics, Inc.
Volume65

Fingerprint

Bone
Finite element method
Tomography
Materials properties
Fabrication
Geometry

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Woo, D. G., Kim, C. H., Kim, H., & Lim, D. (2008). An experimental-numerical methodology for a rapid prototyped application combined with finite element models in vertebral trabecular bone. In Proceedings of the Society for Experimental Mechanics, Inc. (pp. 657-664). (Proceedings of the Society for Experimental Mechanics, Inc.; Vol. 65).
Woo, D. G. ; Kim, C. H. ; Kim, Hansung ; Lim, D. / An experimental-numerical methodology for a rapid prototyped application combined with finite element models in vertebral trabecular bone. Proceedings of the Society for Experimental Mechanics, Inc.. 2008. pp. 657-664 (Proceedings of the Society for Experimental Mechanics, Inc.).
@inproceedings{63070e6518224e7b88d72d930f13567e,
title = "An experimental-numerical methodology for a rapid prototyped application combined with finite element models in vertebral trabecular bone",
abstract = "In the present study, a novel evaluation method involving rapid prototyped (RP) technology and finite element (FE) analysis was used to study the elastic mechanical characteristics of human vertebral trabecular bone. Three-dimensional (3D) geometries of the RP and FE models were obtained from the central area of vertebral bones of female cadavers, age 70 and 85. RP and FE models were generated from the same high-resolution micro-computed tomography (μCT) scan data. We utilized RP technology along with FE analysis based on μCT for high-resolution vertebral trabecular bone specimens. RP models were used to fabricate complex 3D objects of vertebral trabecular bone that were created in a fused deposition modeling machine. RP models of vertebral trabecular bone are advantageous, particularly considering the repetition, risks, and ethical issues involved in using real bone from cadaveric specimens. A cubic specimen with a side length of 6.5 mm or a cylindrical specimen with a 7 mm diameter and 5 mm length proved better than a universal cubic specimen with a side length of 4 mm for the evaluation of elastic mechanical characteristics of vertebral trabecular bones through experimental and simulated compression tests. The results from the experimental compression tests of RP models closely matched those predicted by the FE models, and thus provided substantive corroboration of all three approaches (experimental tests using RP models and simulated tests using FE models with ABS and trabecular bone material properties). The RP technique combined with FE analysis has potential for widespread biomechanical use, such as the fabrication of dummy human skeleton systems for the investigation of elastic mechanical characteristics of various bones.",
author = "Woo, {D. G.} and Kim, {C. H.} and Hansung Kim and D. Lim",
year = "2008",
month = "12",
day = "1",
language = "English",
series = "Proceedings of the Society for Experimental Mechanics, Inc.",
pages = "657--664",
booktitle = "Proceedings of the Society for Experimental Mechanics, Inc.",

}

Woo, DG, Kim, CH, Kim, H & Lim, D 2008, An experimental-numerical methodology for a rapid prototyped application combined with finite element models in vertebral trabecular bone. in Proceedings of the Society for Experimental Mechanics, Inc.. Proceedings of the Society for Experimental Mechanics, Inc., vol. 65, pp. 657-664.

An experimental-numerical methodology for a rapid prototyped application combined with finite element models in vertebral trabecular bone. / Woo, D. G.; Kim, C. H.; Kim, Hansung; Lim, D.

Proceedings of the Society for Experimental Mechanics, Inc.. 2008. p. 657-664 (Proceedings of the Society for Experimental Mechanics, Inc.; Vol. 65).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - An experimental-numerical methodology for a rapid prototyped application combined with finite element models in vertebral trabecular bone

AU - Woo, D. G.

AU - Kim, C. H.

AU - Kim, Hansung

AU - Lim, D.

PY - 2008/12/1

Y1 - 2008/12/1

N2 - In the present study, a novel evaluation method involving rapid prototyped (RP) technology and finite element (FE) analysis was used to study the elastic mechanical characteristics of human vertebral trabecular bone. Three-dimensional (3D) geometries of the RP and FE models were obtained from the central area of vertebral bones of female cadavers, age 70 and 85. RP and FE models were generated from the same high-resolution micro-computed tomography (μCT) scan data. We utilized RP technology along with FE analysis based on μCT for high-resolution vertebral trabecular bone specimens. RP models were used to fabricate complex 3D objects of vertebral trabecular bone that were created in a fused deposition modeling machine. RP models of vertebral trabecular bone are advantageous, particularly considering the repetition, risks, and ethical issues involved in using real bone from cadaveric specimens. A cubic specimen with a side length of 6.5 mm or a cylindrical specimen with a 7 mm diameter and 5 mm length proved better than a universal cubic specimen with a side length of 4 mm for the evaluation of elastic mechanical characteristics of vertebral trabecular bones through experimental and simulated compression tests. The results from the experimental compression tests of RP models closely matched those predicted by the FE models, and thus provided substantive corroboration of all three approaches (experimental tests using RP models and simulated tests using FE models with ABS and trabecular bone material properties). The RP technique combined with FE analysis has potential for widespread biomechanical use, such as the fabrication of dummy human skeleton systems for the investigation of elastic mechanical characteristics of various bones.

AB - In the present study, a novel evaluation method involving rapid prototyped (RP) technology and finite element (FE) analysis was used to study the elastic mechanical characteristics of human vertebral trabecular bone. Three-dimensional (3D) geometries of the RP and FE models were obtained from the central area of vertebral bones of female cadavers, age 70 and 85. RP and FE models were generated from the same high-resolution micro-computed tomography (μCT) scan data. We utilized RP technology along with FE analysis based on μCT for high-resolution vertebral trabecular bone specimens. RP models were used to fabricate complex 3D objects of vertebral trabecular bone that were created in a fused deposition modeling machine. RP models of vertebral trabecular bone are advantageous, particularly considering the repetition, risks, and ethical issues involved in using real bone from cadaveric specimens. A cubic specimen with a side length of 6.5 mm or a cylindrical specimen with a 7 mm diameter and 5 mm length proved better than a universal cubic specimen with a side length of 4 mm for the evaluation of elastic mechanical characteristics of vertebral trabecular bones through experimental and simulated compression tests. The results from the experimental compression tests of RP models closely matched those predicted by the FE models, and thus provided substantive corroboration of all three approaches (experimental tests using RP models and simulated tests using FE models with ABS and trabecular bone material properties). The RP technique combined with FE analysis has potential for widespread biomechanical use, such as the fabrication of dummy human skeleton systems for the investigation of elastic mechanical characteristics of various bones.

UR - http://www.scopus.com/inward/record.url?scp=78149316211&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78149316211&partnerID=8YFLogxK

M3 - Conference contribution

T3 - Proceedings of the Society for Experimental Mechanics, Inc.

SP - 657

EP - 664

BT - Proceedings of the Society for Experimental Mechanics, Inc.

ER -

Woo DG, Kim CH, Kim H, Lim D. An experimental-numerical methodology for a rapid prototyped application combined with finite element models in vertebral trabecular bone. In Proceedings of the Society for Experimental Mechanics, Inc.. 2008. p. 657-664. (Proceedings of the Society for Experimental Mechanics, Inc.).