An NFC transceiver using an inductive powered receiver for passive, active, RW and RFID modes

Jung Hyun Cho, Peter H. Cole, Shiho Kim

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Abstract

This paper present a transceiver for NFC (Near Field Communication) using an inductive powered receiver to enable all type of NFC communication modes such as the passive, active, RW, and RFID modes. Notably, when the external battery has been fully discharged, the RFID mode can be operated through the inductive powered structure. We have analyzed the capacity of the inductive powered receiver of the NFC transceiver to achieve power from an RF Signal for an RFID mode. To understand the range of power available, we have simulated the harvesting of power from a loop antenna at 13.56MHz. The bandwidth of the receiver is designed to range from 106kbps to 424kbps even to a 867kHz subcarrier of 13.56MHz RFID tag.

Original languageEnglish
Title of host publication2009 International SoC Design Conference, ISOCC 2009
Pages456-459
Number of pages4
DOIs
Publication statusPublished - 2009 Dec 1
Event2009 International SoC Design Conference, ISOCC 2009 - Busan, Korea, Republic of
Duration: 2009 Nov 222009 Nov 24

Publication series

Name2009 International SoC Design Conference, ISOCC 2009

Other

Other2009 International SoC Design Conference, ISOCC 2009
CountryKorea, Republic of
CityBusan
Period09/11/2209/11/24

Fingerprint

Transceivers
Radio frequency identification (RFID)
Loop antennas
Bandwidth
Near field communication
Communication

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

Cite this

Cho, J. H., Cole, P. H., & Kim, S. (2009). An NFC transceiver using an inductive powered receiver for passive, active, RW and RFID modes. In 2009 International SoC Design Conference, ISOCC 2009 (pp. 456-459). [5423924] (2009 International SoC Design Conference, ISOCC 2009). https://doi.org/10.1109/SOCDC.2009.5423924
Cho, Jung Hyun ; Cole, Peter H. ; Kim, Shiho. / An NFC transceiver using an inductive powered receiver for passive, active, RW and RFID modes. 2009 International SoC Design Conference, ISOCC 2009. 2009. pp. 456-459 (2009 International SoC Design Conference, ISOCC 2009).
@inproceedings{d93300f016b84a2eb5a1e295ab02e80c,
title = "An NFC transceiver using an inductive powered receiver for passive, active, RW and RFID modes",
abstract = "This paper present a transceiver for NFC (Near Field Communication) using an inductive powered receiver to enable all type of NFC communication modes such as the passive, active, RW, and RFID modes. Notably, when the external battery has been fully discharged, the RFID mode can be operated through the inductive powered structure. We have analyzed the capacity of the inductive powered receiver of the NFC transceiver to achieve power from an RF Signal for an RFID mode. To understand the range of power available, we have simulated the harvesting of power from a loop antenna at 13.56MHz. The bandwidth of the receiver is designed to range from 106kbps to 424kbps even to a 867kHz subcarrier of 13.56MHz RFID tag.",
author = "Cho, {Jung Hyun} and Cole, {Peter H.} and Shiho Kim",
year = "2009",
month = "12",
day = "1",
doi = "10.1109/SOCDC.2009.5423924",
language = "English",
isbn = "9781424450343",
series = "2009 International SoC Design Conference, ISOCC 2009",
pages = "456--459",
booktitle = "2009 International SoC Design Conference, ISOCC 2009",

}

Cho, JH, Cole, PH & Kim, S 2009, An NFC transceiver using an inductive powered receiver for passive, active, RW and RFID modes. in 2009 International SoC Design Conference, ISOCC 2009., 5423924, 2009 International SoC Design Conference, ISOCC 2009, pp. 456-459, 2009 International SoC Design Conference, ISOCC 2009, Busan, Korea, Republic of, 09/11/22. https://doi.org/10.1109/SOCDC.2009.5423924

An NFC transceiver using an inductive powered receiver for passive, active, RW and RFID modes. / Cho, Jung Hyun; Cole, Peter H.; Kim, Shiho.

2009 International SoC Design Conference, ISOCC 2009. 2009. p. 456-459 5423924 (2009 International SoC Design Conference, ISOCC 2009).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - An NFC transceiver using an inductive powered receiver for passive, active, RW and RFID modes

AU - Cho, Jung Hyun

AU - Cole, Peter H.

AU - Kim, Shiho

PY - 2009/12/1

Y1 - 2009/12/1

N2 - This paper present a transceiver for NFC (Near Field Communication) using an inductive powered receiver to enable all type of NFC communication modes such as the passive, active, RW, and RFID modes. Notably, when the external battery has been fully discharged, the RFID mode can be operated through the inductive powered structure. We have analyzed the capacity of the inductive powered receiver of the NFC transceiver to achieve power from an RF Signal for an RFID mode. To understand the range of power available, we have simulated the harvesting of power from a loop antenna at 13.56MHz. The bandwidth of the receiver is designed to range from 106kbps to 424kbps even to a 867kHz subcarrier of 13.56MHz RFID tag.

AB - This paper present a transceiver for NFC (Near Field Communication) using an inductive powered receiver to enable all type of NFC communication modes such as the passive, active, RW, and RFID modes. Notably, when the external battery has been fully discharged, the RFID mode can be operated through the inductive powered structure. We have analyzed the capacity of the inductive powered receiver of the NFC transceiver to achieve power from an RF Signal for an RFID mode. To understand the range of power available, we have simulated the harvesting of power from a loop antenna at 13.56MHz. The bandwidth of the receiver is designed to range from 106kbps to 424kbps even to a 867kHz subcarrier of 13.56MHz RFID tag.

UR - http://www.scopus.com/inward/record.url?scp=77951456646&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77951456646&partnerID=8YFLogxK

U2 - 10.1109/SOCDC.2009.5423924

DO - 10.1109/SOCDC.2009.5423924

M3 - Conference contribution

AN - SCOPUS:77951456646

SN - 9781424450343

T3 - 2009 International SoC Design Conference, ISOCC 2009

SP - 456

EP - 459

BT - 2009 International SoC Design Conference, ISOCC 2009

ER -

Cho JH, Cole PH, Kim S. An NFC transceiver using an inductive powered receiver for passive, active, RW and RFID modes. In 2009 International SoC Design Conference, ISOCC 2009. 2009. p. 456-459. 5423924. (2009 International SoC Design Conference, ISOCC 2009). https://doi.org/10.1109/SOCDC.2009.5423924