An NFC transceiver with RF-powered RFID transponder mode

Jung Hyun Cho, Jikon Kim, Jae Whan Kim, Kyungil Lee, Kwang Duk Ahn, Shiho Kim

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Abstract

A single chip NFC transceiver supporting not only NFC active and passive mode but also 13.56MHz RFID reader and tag mode was designed and fabricated. The proposed NFC transceiver can operate as a RFID tag even without external power supply thanks to a dual antenna structure for initiator and target. The area increment due to additional target antenna is negligible because the target antenna is constructed by using a shielding layer of initiator antenna.

Original languageEnglish
Title of host publication2007 IEEE Asian Solid-State Circuits Conference, A-SSCC
Pages172-175
Number of pages4
DOIs
Publication statusPublished - 2007 Dec 1
Event2007 IEEE Asian Solid-State Circuits Conference, A-SSCC - Jeju, Korea, Republic of
Duration: 2007 Nov 122007 Nov 14

Publication series

Name2007 IEEE Asian Solid-State Circuits Conference, A-SSCC

Other

Other2007 IEEE Asian Solid-State Circuits Conference, A-SSCC
CountryKorea, Republic of
CityJeju
Period07/11/1207/11/14

Fingerprint

Transponders
Transceivers
Radio frequency identification (RFID)
Antennas
Shielding

All Science Journal Classification (ASJC) codes

  • Hardware and Architecture
  • Electrical and Electronic Engineering

Cite this

Cho, J. H., Kim, J., Kim, J. W., Lee, K., Ahn, K. D., & Kim, S. (2007). An NFC transceiver with RF-powered RFID transponder mode. In 2007 IEEE Asian Solid-State Circuits Conference, A-SSCC (pp. 172-175). [4425758] (2007 IEEE Asian Solid-State Circuits Conference, A-SSCC). https://doi.org/10.1109/ASSCC.2007.4425758
Cho, Jung Hyun ; Kim, Jikon ; Kim, Jae Whan ; Lee, Kyungil ; Ahn, Kwang Duk ; Kim, Shiho. / An NFC transceiver with RF-powered RFID transponder mode. 2007 IEEE Asian Solid-State Circuits Conference, A-SSCC. 2007. pp. 172-175 (2007 IEEE Asian Solid-State Circuits Conference, A-SSCC).
@inproceedings{aab14e3291144d3a87fd9e84380fd1a4,
title = "An NFC transceiver with RF-powered RFID transponder mode",
abstract = "A single chip NFC transceiver supporting not only NFC active and passive mode but also 13.56MHz RFID reader and tag mode was designed and fabricated. The proposed NFC transceiver can operate as a RFID tag even without external power supply thanks to a dual antenna structure for initiator and target. The area increment due to additional target antenna is negligible because the target antenna is constructed by using a shielding layer of initiator antenna.",
author = "Cho, {Jung Hyun} and Jikon Kim and Kim, {Jae Whan} and Kyungil Lee and Ahn, {Kwang Duk} and Shiho Kim",
year = "2007",
month = "12",
day = "1",
doi = "10.1109/ASSCC.2007.4425758",
language = "English",
isbn = "1424413605",
series = "2007 IEEE Asian Solid-State Circuits Conference, A-SSCC",
pages = "172--175",
booktitle = "2007 IEEE Asian Solid-State Circuits Conference, A-SSCC",

}

Cho, JH, Kim, J, Kim, JW, Lee, K, Ahn, KD & Kim, S 2007, An NFC transceiver with RF-powered RFID transponder mode. in 2007 IEEE Asian Solid-State Circuits Conference, A-SSCC., 4425758, 2007 IEEE Asian Solid-State Circuits Conference, A-SSCC, pp. 172-175, 2007 IEEE Asian Solid-State Circuits Conference, A-SSCC, Jeju, Korea, Republic of, 07/11/12. https://doi.org/10.1109/ASSCC.2007.4425758

An NFC transceiver with RF-powered RFID transponder mode. / Cho, Jung Hyun; Kim, Jikon; Kim, Jae Whan; Lee, Kyungil; Ahn, Kwang Duk; Kim, Shiho.

2007 IEEE Asian Solid-State Circuits Conference, A-SSCC. 2007. p. 172-175 4425758 (2007 IEEE Asian Solid-State Circuits Conference, A-SSCC).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - An NFC transceiver with RF-powered RFID transponder mode

AU - Cho, Jung Hyun

AU - Kim, Jikon

AU - Kim, Jae Whan

AU - Lee, Kyungil

AU - Ahn, Kwang Duk

AU - Kim, Shiho

PY - 2007/12/1

Y1 - 2007/12/1

N2 - A single chip NFC transceiver supporting not only NFC active and passive mode but also 13.56MHz RFID reader and tag mode was designed and fabricated. The proposed NFC transceiver can operate as a RFID tag even without external power supply thanks to a dual antenna structure for initiator and target. The area increment due to additional target antenna is negligible because the target antenna is constructed by using a shielding layer of initiator antenna.

AB - A single chip NFC transceiver supporting not only NFC active and passive mode but also 13.56MHz RFID reader and tag mode was designed and fabricated. The proposed NFC transceiver can operate as a RFID tag even without external power supply thanks to a dual antenna structure for initiator and target. The area increment due to additional target antenna is negligible because the target antenna is constructed by using a shielding layer of initiator antenna.

UR - http://www.scopus.com/inward/record.url?scp=51349150839&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=51349150839&partnerID=8YFLogxK

U2 - 10.1109/ASSCC.2007.4425758

DO - 10.1109/ASSCC.2007.4425758

M3 - Conference contribution

AN - SCOPUS:51349150839

SN - 1424413605

SN - 9781424413607

T3 - 2007 IEEE Asian Solid-State Circuits Conference, A-SSCC

SP - 172

EP - 175

BT - 2007 IEEE Asian Solid-State Circuits Conference, A-SSCC

ER -

Cho JH, Kim J, Kim JW, Lee K, Ahn KD, Kim S. An NFC transceiver with RF-powered RFID transponder mode. In 2007 IEEE Asian Solid-State Circuits Conference, A-SSCC. 2007. p. 172-175. 4425758. (2007 IEEE Asian Solid-State Circuits Conference, A-SSCC). https://doi.org/10.1109/ASSCC.2007.4425758