Angle compensation of the reference beam in a retrieving process of the holographic data storage system

Sang Hoon Kim, Jang Hyun Kim, Junho Yang, Hyunseok Yang, Joo Youn Park, No Cheol Park, Young Pil Park

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

Holographic data storage system is one of a strong candidate of the next generation high capacity data storage system with a high storage density and a fast data transfer rate. The holographic data storage system uses two beams in a recording process and only a reference beam is used for retrieving stored data. With the angle multiplexing when the angle of the reference beam is deviated from its correct point, the diffraction efficiency of the corresponding data page is reduced and SNR is decreased. Therefore it is necessary to compensate the angle of the reference beam to reconstruct a good data page. To compensate the angle error, the angle of the reference beam is changed precisely within a specific range and stopped at the angle with the highest diffraction efficiency. By this method, in a retrieving process if there is a difference between the real angle of the reference beam and its correct angle, the error can be compensated and the best data page can be obtained.

Original languageEnglish
Pages (from-to)1403-1410
Number of pages8
JournalMicrosystem Technologies
Volume13
Issue number8-10
DOIs
Publication statusPublished - 2007 May 1

Fingerprint

data storage
Computer systems
Diffraction efficiency
Data storage equipment
Data transfer rates
Multiplexing
Compensation and Redress
multiplexing
diffraction
recording

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Hardware and Architecture
  • Electrical and Electronic Engineering

Cite this

Kim, Sang Hoon ; Kim, Jang Hyun ; Yang, Junho ; Yang, Hyunseok ; Park, Joo Youn ; Park, No Cheol ; Park, Young Pil. / Angle compensation of the reference beam in a retrieving process of the holographic data storage system. In: Microsystem Technologies. 2007 ; Vol. 13, No. 8-10. pp. 1403-1410.
@article{987a7c0e61654b38a73530e10bf6249e,
title = "Angle compensation of the reference beam in a retrieving process of the holographic data storage system",
abstract = "Holographic data storage system is one of a strong candidate of the next generation high capacity data storage system with a high storage density and a fast data transfer rate. The holographic data storage system uses two beams in a recording process and only a reference beam is used for retrieving stored data. With the angle multiplexing when the angle of the reference beam is deviated from its correct point, the diffraction efficiency of the corresponding data page is reduced and SNR is decreased. Therefore it is necessary to compensate the angle of the reference beam to reconstruct a good data page. To compensate the angle error, the angle of the reference beam is changed precisely within a specific range and stopped at the angle with the highest diffraction efficiency. By this method, in a retrieving process if there is a difference between the real angle of the reference beam and its correct angle, the error can be compensated and the best data page can be obtained.",
author = "Kim, {Sang Hoon} and Kim, {Jang Hyun} and Junho Yang and Hyunseok Yang and Park, {Joo Youn} and Park, {No Cheol} and Park, {Young Pil}",
year = "2007",
month = "5",
day = "1",
doi = "10.1007/s00542-007-0379-0",
language = "English",
volume = "13",
pages = "1403--1410",
journal = "Microsystem Technologies",
issn = "0946-7076",
publisher = "Springer Verlag",
number = "8-10",

}

Angle compensation of the reference beam in a retrieving process of the holographic data storage system. / Kim, Sang Hoon; Kim, Jang Hyun; Yang, Junho; Yang, Hyunseok; Park, Joo Youn; Park, No Cheol; Park, Young Pil.

In: Microsystem Technologies, Vol. 13, No. 8-10, 01.05.2007, p. 1403-1410.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Angle compensation of the reference beam in a retrieving process of the holographic data storage system

AU - Kim, Sang Hoon

AU - Kim, Jang Hyun

AU - Yang, Junho

AU - Yang, Hyunseok

AU - Park, Joo Youn

AU - Park, No Cheol

AU - Park, Young Pil

PY - 2007/5/1

Y1 - 2007/5/1

N2 - Holographic data storage system is one of a strong candidate of the next generation high capacity data storage system with a high storage density and a fast data transfer rate. The holographic data storage system uses two beams in a recording process and only a reference beam is used for retrieving stored data. With the angle multiplexing when the angle of the reference beam is deviated from its correct point, the diffraction efficiency of the corresponding data page is reduced and SNR is decreased. Therefore it is necessary to compensate the angle of the reference beam to reconstruct a good data page. To compensate the angle error, the angle of the reference beam is changed precisely within a specific range and stopped at the angle with the highest diffraction efficiency. By this method, in a retrieving process if there is a difference between the real angle of the reference beam and its correct angle, the error can be compensated and the best data page can be obtained.

AB - Holographic data storage system is one of a strong candidate of the next generation high capacity data storage system with a high storage density and a fast data transfer rate. The holographic data storage system uses two beams in a recording process and only a reference beam is used for retrieving stored data. With the angle multiplexing when the angle of the reference beam is deviated from its correct point, the diffraction efficiency of the corresponding data page is reduced and SNR is decreased. Therefore it is necessary to compensate the angle of the reference beam to reconstruct a good data page. To compensate the angle error, the angle of the reference beam is changed precisely within a specific range and stopped at the angle with the highest diffraction efficiency. By this method, in a retrieving process if there is a difference between the real angle of the reference beam and its correct angle, the error can be compensated and the best data page can be obtained.

UR - http://www.scopus.com/inward/record.url?scp=34548279316&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34548279316&partnerID=8YFLogxK

U2 - 10.1007/s00542-007-0379-0

DO - 10.1007/s00542-007-0379-0

M3 - Article

AN - SCOPUS:34548279316

VL - 13

SP - 1403

EP - 1410

JO - Microsystem Technologies

JF - Microsystem Technologies

SN - 0946-7076

IS - 8-10

ER -