The bond behavior of glass fiber-reinforced polymer (GFRP) and steel bars embedded in ultra-high-performance fiber-reinforced concrete (UHPFRC) was investigated according to embedment length and bar diameter. Post-peak bond stress-slip softening curve of the GFRP bars was obtained, and a wedging effect was quantitatively evaluated. Test results indicated that a normalized bond strength of 5 was applicable for steel bars embedded in UHPFRC, and the development lengths of normal- and high-strength steel bars were determined to be 2 and 2.5 times the bar diameter, respectively. The GFRP bars exhibited approximately 70% lower bond strength than the steel bars, and the bond stress additionally applied by the wedging effect increased almost linearly with respect to the slip. Based on dimensionless bond stress and slip parameters, an appropriate theoretical model for the bond stress and slip relationship of steel bars in UHPFRC was suggested, and it was verified through comparison with the test data.
|Number of pages||18|
|Journal||Advanced Composite Materials|
|Publication status||Published - 2017 Nov 2|
Bibliographical noteFunding Information:
This research was supported by a grant [13SCIPA01] from Smart Civil Infrastructure Research Program funded by the Ministry of Land, Infrastructure and Transport (MOLIT) of Korea Government and Korea Agency for Infrastructure Technology Advancement (KAIA).
© 2016 Japan Society for Composite Materials, Korean Society for Composite Materials and Informa UK Limited, trading as Taylor & Francis Group.
All Science Journal Classification (ASJC) codes
- Ceramics and Composites
- Mechanics of Materials
- Mechanical Engineering