Boron nitride-based overcoat thick films for moSi2 planar heating elements

Byeong Kon Kim, Hyung Sub Lee, Cheol Weon Jeong, Dong Bin Han, Min Seok Jeon, Jun Kwang Song, Yong Soo Cho

Research output: Contribution to journalArticlepeer-review


This work first reports a boron nitride-based dielectric system that is designed for MoSi2-based planar heating elements patterned on a regular 96% alumina substrate. The dielectric system is expected to function as an overcoat layer mainly to protect the printed heating elements from environments and to reduce thermal stress induced during thermal heating through improved heat dissipation. The boron nitride (BN) pastes mixed with a low softening glass of calcium barium aluminoborosilicate were screen printed onto MoSi2 thick films and then fired at a temperature of 900°C. The addition of BN was found to increase the thermal conductivity considerably without detrimental chemical reactions with glass constituents. For instance, the thick film containing 30 wt% BN was regarded as a promising composition from the supporting evidences of good adhesion with MoSi2, an increased thermal conductivity of ∼31 W·(m·K)-1, and a high electrical resistance of 4.7 × 1010 Ω.

Original languageEnglish
Pages (from-to)1867-1870
Number of pages4
JournalJournal of the American Ceramic Society
Issue number8
Publication statusPublished - 2009 Aug

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites
  • Materials Chemistry


Dive into the research topics of 'Boron nitride-based overcoat thick films for moSi2 planar heating elements'. Together they form a unique fingerprint.

Cite this