Characterization of knock in a spark-ignition engine

Kwang Min Chun, John B. Heywood

Research output: Contribution to conferencePaper

45 Citations (Scopus)

Abstract

Spark-ignition engine knock was characterized in terms of when during the engine cycle and combustion process knock occurred and its magnitude or intensity. Cylinder pressure data from a large number of successive individual cycles were generated from a single-cylinder engine of hemispherical chamber design over a range of operating conditions where knock occurred in some or all of these cycles. Mean values and distributions of following parameters were quantified: knock occurrence crank angle, knock intensity, combustion rate and the end-gas thermodynamic state. These parameters were determined from the cylinder pressure data on an individual cycle basis using a mass-burn-rate analysis. The effects of engine operating variables on these parameters were studied, and correlations between these parameters were examined. The individual cycle knock occurrence crank angle correlates well with the combustion rate or a thermodynamic parameter representing the end-gas temperature history on an individual cycle basis. But the individual cycle knock intensity does not correlate with any of the relevant variables measured although the mean knock intensity did correlate well with the mean unburned fuel fraction at knock. This lack of correlation on an individual cycle basis is thought to be due to differences in the end-gas temperature and species concentration distributions, and differences in the geometry and location of the end-gas region, cycle-by-cycle.

Original languageEnglish
DOIs
Publication statusPublished - 1989 Dec 1
EventInternational Congress and Exposition - Detroit, MI, United States
Duration: 1989 Feb 271989 Mar 3

Other

OtherInternational Congress and Exposition
CountryUnited States
CityDetroit, MI
Period89/2/2789/3/3

Fingerprint

Combustion knock
Internal combustion engines
Engine cylinders
Gases
Thermodynamics
Engines
Temperature
Geometry

All Science Journal Classification (ASJC) codes

  • Automotive Engineering
  • Safety, Risk, Reliability and Quality
  • Pollution
  • Industrial and Manufacturing Engineering

Cite this

Chun, K. M., & Heywood, J. B. (1989). Characterization of knock in a spark-ignition engine. Paper presented at International Congress and Exposition, Detroit, MI, United States. https://doi.org/10.4271/890156
Chun, Kwang Min ; Heywood, John B. / Characterization of knock in a spark-ignition engine. Paper presented at International Congress and Exposition, Detroit, MI, United States.
@conference{7f9148fda2eb496c8bb90c9aae38899c,
title = "Characterization of knock in a spark-ignition engine",
abstract = "Spark-ignition engine knock was characterized in terms of when during the engine cycle and combustion process knock occurred and its magnitude or intensity. Cylinder pressure data from a large number of successive individual cycles were generated from a single-cylinder engine of hemispherical chamber design over a range of operating conditions where knock occurred in some or all of these cycles. Mean values and distributions of following parameters were quantified: knock occurrence crank angle, knock intensity, combustion rate and the end-gas thermodynamic state. These parameters were determined from the cylinder pressure data on an individual cycle basis using a mass-burn-rate analysis. The effects of engine operating variables on these parameters were studied, and correlations between these parameters were examined. The individual cycle knock occurrence crank angle correlates well with the combustion rate or a thermodynamic parameter representing the end-gas temperature history on an individual cycle basis. But the individual cycle knock intensity does not correlate with any of the relevant variables measured although the mean knock intensity did correlate well with the mean unburned fuel fraction at knock. This lack of correlation on an individual cycle basis is thought to be due to differences in the end-gas temperature and species concentration distributions, and differences in the geometry and location of the end-gas region, cycle-by-cycle.",
author = "Chun, {Kwang Min} and Heywood, {John B.}",
year = "1989",
month = "12",
day = "1",
doi = "10.4271/890156",
language = "English",
note = "International Congress and Exposition ; Conference date: 27-02-1989 Through 03-03-1989",

}

Chun, KM & Heywood, JB 1989, 'Characterization of knock in a spark-ignition engine' Paper presented at International Congress and Exposition, Detroit, MI, United States, 89/2/27 - 89/3/3, . https://doi.org/10.4271/890156

Characterization of knock in a spark-ignition engine. / Chun, Kwang Min; Heywood, John B.

1989. Paper presented at International Congress and Exposition, Detroit, MI, United States.

Research output: Contribution to conferencePaper

TY - CONF

T1 - Characterization of knock in a spark-ignition engine

AU - Chun, Kwang Min

AU - Heywood, John B.

PY - 1989/12/1

Y1 - 1989/12/1

N2 - Spark-ignition engine knock was characterized in terms of when during the engine cycle and combustion process knock occurred and its magnitude or intensity. Cylinder pressure data from a large number of successive individual cycles were generated from a single-cylinder engine of hemispherical chamber design over a range of operating conditions where knock occurred in some or all of these cycles. Mean values and distributions of following parameters were quantified: knock occurrence crank angle, knock intensity, combustion rate and the end-gas thermodynamic state. These parameters were determined from the cylinder pressure data on an individual cycle basis using a mass-burn-rate analysis. The effects of engine operating variables on these parameters were studied, and correlations between these parameters were examined. The individual cycle knock occurrence crank angle correlates well with the combustion rate or a thermodynamic parameter representing the end-gas temperature history on an individual cycle basis. But the individual cycle knock intensity does not correlate with any of the relevant variables measured although the mean knock intensity did correlate well with the mean unburned fuel fraction at knock. This lack of correlation on an individual cycle basis is thought to be due to differences in the end-gas temperature and species concentration distributions, and differences in the geometry and location of the end-gas region, cycle-by-cycle.

AB - Spark-ignition engine knock was characterized in terms of when during the engine cycle and combustion process knock occurred and its magnitude or intensity. Cylinder pressure data from a large number of successive individual cycles were generated from a single-cylinder engine of hemispherical chamber design over a range of operating conditions where knock occurred in some or all of these cycles. Mean values and distributions of following parameters were quantified: knock occurrence crank angle, knock intensity, combustion rate and the end-gas thermodynamic state. These parameters were determined from the cylinder pressure data on an individual cycle basis using a mass-burn-rate analysis. The effects of engine operating variables on these parameters were studied, and correlations between these parameters were examined. The individual cycle knock occurrence crank angle correlates well with the combustion rate or a thermodynamic parameter representing the end-gas temperature history on an individual cycle basis. But the individual cycle knock intensity does not correlate with any of the relevant variables measured although the mean knock intensity did correlate well with the mean unburned fuel fraction at knock. This lack of correlation on an individual cycle basis is thought to be due to differences in the end-gas temperature and species concentration distributions, and differences in the geometry and location of the end-gas region, cycle-by-cycle.

UR - http://www.scopus.com/inward/record.url?scp=79959857682&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79959857682&partnerID=8YFLogxK

U2 - 10.4271/890156

DO - 10.4271/890156

M3 - Paper

ER -

Chun KM, Heywood JB. Characterization of knock in a spark-ignition engine. 1989. Paper presented at International Congress and Exposition, Detroit, MI, United States. https://doi.org/10.4271/890156