Corrigendum to ‘Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness: an in-vitro study’ [Journal of Dentistry 125C (2022) 104268] (Journal of Dentistry (2022) 125, (S0300571222003244), (10.1016/j.jdent.2022.104268))

Gan Jin; Seung Ho Shin; June Sung Shim; Keun Woo Lee; Jong Eun Kim

doi:10.1016/j.jdent.2022.104392

Corrigendum to ‘Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness: an in-vitro study’ [Journal of Dentistry 125C (2022) 104268] (Journal of Dentistry (2022) 125, (S0300571222003244), (10.1016/j.jdent.2022.104268))

Gan Jin, Seung Ho Shin, June Sung Shim, Keun Woo Lee, Jong Eun Kim

Department of Prosthodontics

Research output: Contribution to journal › Comment/debate › peer-review

Abstract

The authors regret that the acknowledgment within this article was not fully accurate and would like to confirm that this research was supported by a grant from the Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI), funded by the Ministry of Health & Welfare, Republic of Korea (grant number: HI20C0127) The authors would like to apologise for any inconvenience caused.

Original language	English
Article number	104392
Journal	Journal of Dentistry
Volume	129
DOIs	https://doi.org/10.1016/j.jdent.2022.104392
Publication status	Published - 2023 Feb

Bibliographical note

Funding Information:
The authors regret that the acknowledgment within this article was not fully accurate and would like to confirm that this research was supported by a grant from the Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI), funded by the Ministry of Health & Welfare, Republic of Korea (grant number: HI20C0127)

Publisher Copyright:
© 2022 Elsevier Ltd

All Science Journal Classification (ASJC) codes

Dentistry(all)

Access to Document

10.1016/j.jdent.2022.104392

Fingerprint

Dive into the research topics of 'Corrigendum to ‘Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness: an in-vitro study’ [Journal of Dentistry 125C (2022) 104268] (Journal of Dentistry (2022) 125, (S0300571222003244), (10.1016/j.jdent.2022.104268))'. Together they form a unique fingerprint.

Cite this

Jin, G., Shin, S. H., Shim, J. S., Lee, K. W., & Kim, J. E. (2023). Corrigendum to ‘Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness: an in-vitro study’ [Journal of Dentistry 125C (2022) 104268] (Journal of Dentistry (2022) 125, (S0300571222003244), (10.1016/j.jdent.2022.104268)). Journal of Dentistry, 129, [104392]. https://doi.org/10.1016/j.jdent.2022.104392

Jin, Gan ; Shin, Seung Ho ; Shim, June Sung et al. / Corrigendum to ‘Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness : an in-vitro study’ [Journal of Dentistry 125C (2022) 104268] (Journal of Dentistry (2022) 125, (S0300571222003244), (10.1016/j.jdent.2022.104268)). In: Journal of Dentistry. 2023 ; Vol. 129.

@article{389ff8d0052146698ea38f7bf07d747b,

title = "Corrigendum to {\textquoteleft}Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness: an in-vitro study{\textquoteright} [Journal of Dentistry 125C (2022) 104268] (Journal of Dentistry (2022) 125, (S0300571222003244), (10.1016/j.jdent.2022.104268))",

abstract = "The authors regret that the acknowledgment within this article was not fully accurate and would like to confirm that this research was supported by a grant from the Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI), funded by the Ministry of Health & Welfare, Republic of Korea (grant number: HI20C0127) The authors would like to apologise for any inconvenience caused.",

author = "Gan Jin and Shin, {Seung Ho} and Shim, {June Sung} and Lee, {Keun Woo} and Kim, {Jong Eun}",

note = "Funding Information: The authors regret that the acknowledgment within this article was not fully accurate and would like to confirm that this research was supported by a grant from the Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI), funded by the Ministry of Health & Welfare, Republic of Korea (grant number: HI20C0127) Publisher Copyright: {\textcopyright} 2022 Elsevier Ltd",

year = "2023",

month = feb,

doi = "10.1016/j.jdent.2022.104392",

language = "English",

volume = "129",

journal = "Journal of Dentistry",

issn = "0300-5712",

publisher = "Elsevier BV",

}

Jin, G, Shin, SH, Shim, JS, Lee, KW & Kim, JE 2023, 'Corrigendum to ‘Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness: an in-vitro study’ [Journal of Dentistry 125C (2022) 104268] (Journal of Dentistry (2022) 125, (S0300571222003244), (10.1016/j.jdent.2022.104268))', Journal of Dentistry, vol. 129, 104392. https://doi.org/10.1016/j.jdent.2022.104392

Corrigendum to ‘Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness : an in-vitro study’ [Journal of Dentistry 125C (2022) 104268] (Journal of Dentistry (2022) 125, (S0300571222003244), (10.1016/j.jdent.2022.104268)). / Jin, Gan; Shin, Seung Ho; Shim, June Sung et al.

In: Journal of Dentistry, Vol. 129, 104392, 02.2023.

Research output: Contribution to journal › Comment/debate › peer-review

TY - JOUR

T1 - Corrigendum to ‘Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness

T2 - an in-vitro study’ [Journal of Dentistry 125C (2022) 104268] (Journal of Dentistry (2022) 125, (S0300571222003244), (10.1016/j.jdent.2022.104268))

AU - Jin, Gan

AU - Shin, Seung Ho

AU - Shim, June Sung

AU - Lee, Keun Woo

AU - Kim, Jong Eun

N1 - Funding Information: The authors regret that the acknowledgment within this article was not fully accurate and would like to confirm that this research was supported by a grant from the Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI), funded by the Ministry of Health & Welfare, Republic of Korea (grant number: HI20C0127) Publisher Copyright: © 2022 Elsevier Ltd

PY - 2023/2

Y1 - 2023/2

N2 - The authors regret that the acknowledgment within this article was not fully accurate and would like to confirm that this research was supported by a grant from the Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI), funded by the Ministry of Health & Welfare, Republic of Korea (grant number: HI20C0127) The authors would like to apologise for any inconvenience caused.

AB - The authors regret that the acknowledgment within this article was not fully accurate and would like to confirm that this research was supported by a grant from the Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI), funded by the Ministry of Health & Welfare, Republic of Korea (grant number: HI20C0127) The authors would like to apologise for any inconvenience caused.

UR - http://www.scopus.com/inward/record.url?scp=85146043411&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85146043411&partnerID=8YFLogxK

U2 - 10.1016/j.jdent.2022.104392

DO - 10.1016/j.jdent.2022.104392

M3 - Comment/debate

C2 - 36608505

AN - SCOPUS:85146043411

SN - 0300-5712

VL - 129

JO - Journal of Dentistry

JF - Journal of Dentistry

M1 - 104392

ER -

Jin G, Shin SH, Shim JS, Lee KW, Kim JE. Corrigendum to ‘Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness: an in-vitro study’ [Journal of Dentistry 125C (2022) 104268] (Journal of Dentistry (2022) 125, (S0300571222003244), (10.1016/j.jdent.2022.104268)). Journal of Dentistry. 2023 Feb;129:104392. doi: 10.1016/j.jdent.2022.104392