Design and fabrication of micro optical components for optical data storage by micromolding

Shinill Kang, Su Dong Moon

Research output: Contribution to conferencePaper

5 Citations (Scopus)

Abstract

The design and fabrication of micro lenses using polymer powder for optical data storage by micro compression molding process were discussed. The optical properties of the molded microlenses were characterized by an AFM calibration specimen of 10 μm square patterns. Various defects during molding was analyzed and process was experimentally optimized by controlling process parameters. Micro lenses of hemispherical shape with 250μm in diameter were fabricated and magnification of image by 3.143 times was achieved.

Original languageEnglish
PagesII16-II17
Publication statusPublished - 2001 Dec 1
Event4th Pacific Rim Conference on Lasers and Electro-Optics - Chiba, Japan
Duration: 2001 Jul 152001 Jul 19

Other

Other4th Pacific Rim Conference on Lasers and Electro-Optics
CountryJapan
CityChiba
Period01/7/1501/7/19

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Cite this

Kang, S., & Moon, S. D. (2001). Design and fabrication of micro optical components for optical data storage by micromolding. II16-II17. Paper presented at 4th Pacific Rim Conference on Lasers and Electro-Optics, Chiba, Japan.