Design of moving magnet type pickup actuator using inserted coil

Myeong Gyu Song, Yoon Ki Kim, No Cheol Park, Jeonghoon Yoo, Young Pil Park, Nobuaki Onagi, Goichi Akanuma

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

Recently, the demand of the information storage devices with large storage capacity such as Blu-ray Disc and high-definition television is increased. In keeping with this trend, the optical storage devices are also required to have high data transfer rate and large storage capacity. To satisfy these requirements, the actuator for optical disc drive should have a high servo bandwidth to compensate the vibration of optical disc. The servo bandwidth is limited by some flexible modes of the actuator, thus it is essential to make these frequencies of flexible modes to high frequency region. The frequency of flexible mode depends on materials and shape. Stiff materials and simple shape is useful to increase the frequency of flexible mode. In this paper, we suggested a moving magnet type actuator having flexible modes which are happened at high frequency region. Generally, the moving magnet type actuator has an advantage to increase the frequency of flexible mode because the moving magnet type actuator has simple structure and the Young's modulus of magnet is high. However, large moving mass and inefficiency of Electromagnetic (EM) circuit cut down driving sensitivities of actuator. To improve driving sensitivities, we designed the model with the closed EM circuit for tracking actuation. The design of experiments (DOE) procedure is applied to get proper design parameters and the variable metric method (VMM) which is a technique of optimization is used to improve driving sensitivity. The lens holder is also improved based on the optimization result of EM circuit. And to make up for the low efficiency of EM circuit, the thermal stability is checked on condition that the input current is very high. At last, the final design of moving magnet type actuator is suggested and it is verified that the driving performance and the structural stiffness of the final design is sufficient.

Original languageEnglish
Pages (from-to)1719-1728
Number of pages10
JournalMicrosystem Technologies
Volume15
Issue number10-11
DOIs
Publication statusPublished - 2009 Jan 1

Fingerprint

Pickups
Magnets
magnets
coils
Actuators
actuators
sensors
electromagnetism
Networks (circuits)
optical disks
sensitivity
Data transfer rates
bandwidth
Bandwidth
high definition television
Data storage equipment
High definition television
optimization
experiment design
holders

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering
  • Hardware and Architecture
  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics

Cite this

Song, Myeong Gyu ; Kim, Yoon Ki ; Park, No Cheol ; Yoo, Jeonghoon ; Park, Young Pil ; Onagi, Nobuaki ; Akanuma, Goichi. / Design of moving magnet type pickup actuator using inserted coil. In: Microsystem Technologies. 2009 ; Vol. 15, No. 10-11. pp. 1719-1728.
@article{b89cac7cab044932af916b61b247c7c2,
title = "Design of moving magnet type pickup actuator using inserted coil",
abstract = "Recently, the demand of the information storage devices with large storage capacity such as Blu-ray Disc and high-definition television is increased. In keeping with this trend, the optical storage devices are also required to have high data transfer rate and large storage capacity. To satisfy these requirements, the actuator for optical disc drive should have a high servo bandwidth to compensate the vibration of optical disc. The servo bandwidth is limited by some flexible modes of the actuator, thus it is essential to make these frequencies of flexible modes to high frequency region. The frequency of flexible mode depends on materials and shape. Stiff materials and simple shape is useful to increase the frequency of flexible mode. In this paper, we suggested a moving magnet type actuator having flexible modes which are happened at high frequency region. Generally, the moving magnet type actuator has an advantage to increase the frequency of flexible mode because the moving magnet type actuator has simple structure and the Young's modulus of magnet is high. However, large moving mass and inefficiency of Electromagnetic (EM) circuit cut down driving sensitivities of actuator. To improve driving sensitivities, we designed the model with the closed EM circuit for tracking actuation. The design of experiments (DOE) procedure is applied to get proper design parameters and the variable metric method (VMM) which is a technique of optimization is used to improve driving sensitivity. The lens holder is also improved based on the optimization result of EM circuit. And to make up for the low efficiency of EM circuit, the thermal stability is checked on condition that the input current is very high. At last, the final design of moving magnet type actuator is suggested and it is verified that the driving performance and the structural stiffness of the final design is sufficient.",
author = "Song, {Myeong Gyu} and Kim, {Yoon Ki} and Park, {No Cheol} and Jeonghoon Yoo and Park, {Young Pil} and Nobuaki Onagi and Goichi Akanuma",
year = "2009",
month = "1",
day = "1",
doi = "10.1007/s00542-009-0874-6",
language = "English",
volume = "15",
pages = "1719--1728",
journal = "Microsystem Technologies",
issn = "0946-7076",
publisher = "Springer Verlag",
number = "10-11",

}

Song, MG, Kim, YK, Park, NC, Yoo, J, Park, YP, Onagi, N & Akanuma, G 2009, 'Design of moving magnet type pickup actuator using inserted coil', Microsystem Technologies, vol. 15, no. 10-11, pp. 1719-1728. https://doi.org/10.1007/s00542-009-0874-6

Design of moving magnet type pickup actuator using inserted coil. / Song, Myeong Gyu; Kim, Yoon Ki; Park, No Cheol; Yoo, Jeonghoon; Park, Young Pil; Onagi, Nobuaki; Akanuma, Goichi.

In: Microsystem Technologies, Vol. 15, No. 10-11, 01.01.2009, p. 1719-1728.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Design of moving magnet type pickup actuator using inserted coil

AU - Song, Myeong Gyu

AU - Kim, Yoon Ki

AU - Park, No Cheol

AU - Yoo, Jeonghoon

AU - Park, Young Pil

AU - Onagi, Nobuaki

AU - Akanuma, Goichi

PY - 2009/1/1

Y1 - 2009/1/1

N2 - Recently, the demand of the information storage devices with large storage capacity such as Blu-ray Disc and high-definition television is increased. In keeping with this trend, the optical storage devices are also required to have high data transfer rate and large storage capacity. To satisfy these requirements, the actuator for optical disc drive should have a high servo bandwidth to compensate the vibration of optical disc. The servo bandwidth is limited by some flexible modes of the actuator, thus it is essential to make these frequencies of flexible modes to high frequency region. The frequency of flexible mode depends on materials and shape. Stiff materials and simple shape is useful to increase the frequency of flexible mode. In this paper, we suggested a moving magnet type actuator having flexible modes which are happened at high frequency region. Generally, the moving magnet type actuator has an advantage to increase the frequency of flexible mode because the moving magnet type actuator has simple structure and the Young's modulus of magnet is high. However, large moving mass and inefficiency of Electromagnetic (EM) circuit cut down driving sensitivities of actuator. To improve driving sensitivities, we designed the model with the closed EM circuit for tracking actuation. The design of experiments (DOE) procedure is applied to get proper design parameters and the variable metric method (VMM) which is a technique of optimization is used to improve driving sensitivity. The lens holder is also improved based on the optimization result of EM circuit. And to make up for the low efficiency of EM circuit, the thermal stability is checked on condition that the input current is very high. At last, the final design of moving magnet type actuator is suggested and it is verified that the driving performance and the structural stiffness of the final design is sufficient.

AB - Recently, the demand of the information storage devices with large storage capacity such as Blu-ray Disc and high-definition television is increased. In keeping with this trend, the optical storage devices are also required to have high data transfer rate and large storage capacity. To satisfy these requirements, the actuator for optical disc drive should have a high servo bandwidth to compensate the vibration of optical disc. The servo bandwidth is limited by some flexible modes of the actuator, thus it is essential to make these frequencies of flexible modes to high frequency region. The frequency of flexible mode depends on materials and shape. Stiff materials and simple shape is useful to increase the frequency of flexible mode. In this paper, we suggested a moving magnet type actuator having flexible modes which are happened at high frequency region. Generally, the moving magnet type actuator has an advantage to increase the frequency of flexible mode because the moving magnet type actuator has simple structure and the Young's modulus of magnet is high. However, large moving mass and inefficiency of Electromagnetic (EM) circuit cut down driving sensitivities of actuator. To improve driving sensitivities, we designed the model with the closed EM circuit for tracking actuation. The design of experiments (DOE) procedure is applied to get proper design parameters and the variable metric method (VMM) which is a technique of optimization is used to improve driving sensitivity. The lens holder is also improved based on the optimization result of EM circuit. And to make up for the low efficiency of EM circuit, the thermal stability is checked on condition that the input current is very high. At last, the final design of moving magnet type actuator is suggested and it is verified that the driving performance and the structural stiffness of the final design is sufficient.

UR - http://www.scopus.com/inward/record.url?scp=84898032587&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84898032587&partnerID=8YFLogxK

U2 - 10.1007/s00542-009-0874-6

DO - 10.1007/s00542-009-0874-6

M3 - Article

VL - 15

SP - 1719

EP - 1728

JO - Microsystem Technologies

JF - Microsystem Technologies

SN - 0946-7076

IS - 10-11

ER -