Design of prototype superconducting hybrid electromagnet for high speed Maglev

Chang Young Lee, Bu Byoung Kang, Jung Min Jo, Young Jae Han, Sung Yul Chu, Young Jin Hwang, Hyun Chul Jo, Jea Young Jang, Tae Kuk Ko

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

This paper deals with the design and fabrication of prototype superconducting hybrid electromagnet(SH-EM) for EMS (Electromagnetic suspension)-based Maglev. The design requirements are based on the normal conducting EM used in the German high-speed Maglev. From the MMF- Levitation force curves simulated by FEM analysis, the required MMF by superconducting coil is suggested. As an experimental test setup to demonstrate the SH-EM, the experimental SH-EM with HTS coil cooled in LN2 is fabricated. From the expected operating current of the HTS coil, the levitation performance of the SH-EM is estimated.

Original languageEnglish
Pages (from-to)1-4
Number of pages4
JournalJournal of the Korea Institute of Applied Superconductivity and Cryogenics
Volume13
Issue number3
DOIs
Publication statusPublished - 2011 Jan 1

Fingerprint

Electromagnets
Suspensions
Finite element method
Fabrication

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Cite this

Lee, Chang Young ; Kang, Bu Byoung ; Jo, Jung Min ; Han, Young Jae ; Chu, Sung Yul ; Hwang, Young Jin ; Jo, Hyun Chul ; Jang, Jea Young ; Ko, Tae Kuk. / Design of prototype superconducting hybrid electromagnet for high speed Maglev. In: Journal of the Korea Institute of Applied Superconductivity and Cryogenics. 2011 ; Vol. 13, No. 3. pp. 1-4.
@article{b6d4aab64ac24f3ba78b626f691154ba,
title = "Design of prototype superconducting hybrid electromagnet for high speed Maglev",
abstract = "This paper deals with the design and fabrication of prototype superconducting hybrid electromagnet(SH-EM) for EMS (Electromagnetic suspension)-based Maglev. The design requirements are based on the normal conducting EM used in the German high-speed Maglev. From the MMF- Levitation force curves simulated by FEM analysis, the required MMF by superconducting coil is suggested. As an experimental test setup to demonstrate the SH-EM, the experimental SH-EM with HTS coil cooled in LN2 is fabricated. From the expected operating current of the HTS coil, the levitation performance of the SH-EM is estimated.",
author = "Lee, {Chang Young} and Kang, {Bu Byoung} and Jo, {Jung Min} and Han, {Young Jae} and Chu, {Sung Yul} and Hwang, {Young Jin} and Jo, {Hyun Chul} and Jang, {Jea Young} and Ko, {Tae Kuk}",
year = "2011",
month = "1",
day = "1",
doi = "10.9714/psac.2011.13.3.001",
language = "English",
volume = "13",
pages = "1--4",
journal = "Progress in Superconductivity and Cryogenics (PSAC)",
issn = "1229-3008",
publisher = "Korea Institute of Applied Superconductivity and Cryogenics",
number = "3",

}

Design of prototype superconducting hybrid electromagnet for high speed Maglev. / Lee, Chang Young; Kang, Bu Byoung; Jo, Jung Min; Han, Young Jae; Chu, Sung Yul; Hwang, Young Jin; Jo, Hyun Chul; Jang, Jea Young; Ko, Tae Kuk.

In: Journal of the Korea Institute of Applied Superconductivity and Cryogenics, Vol. 13, No. 3, 01.01.2011, p. 1-4.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Design of prototype superconducting hybrid electromagnet for high speed Maglev

AU - Lee, Chang Young

AU - Kang, Bu Byoung

AU - Jo, Jung Min

AU - Han, Young Jae

AU - Chu, Sung Yul

AU - Hwang, Young Jin

AU - Jo, Hyun Chul

AU - Jang, Jea Young

AU - Ko, Tae Kuk

PY - 2011/1/1

Y1 - 2011/1/1

N2 - This paper deals with the design and fabrication of prototype superconducting hybrid electromagnet(SH-EM) for EMS (Electromagnetic suspension)-based Maglev. The design requirements are based on the normal conducting EM used in the German high-speed Maglev. From the MMF- Levitation force curves simulated by FEM analysis, the required MMF by superconducting coil is suggested. As an experimental test setup to demonstrate the SH-EM, the experimental SH-EM with HTS coil cooled in LN2 is fabricated. From the expected operating current of the HTS coil, the levitation performance of the SH-EM is estimated.

AB - This paper deals with the design and fabrication of prototype superconducting hybrid electromagnet(SH-EM) for EMS (Electromagnetic suspension)-based Maglev. The design requirements are based on the normal conducting EM used in the German high-speed Maglev. From the MMF- Levitation force curves simulated by FEM analysis, the required MMF by superconducting coil is suggested. As an experimental test setup to demonstrate the SH-EM, the experimental SH-EM with HTS coil cooled in LN2 is fabricated. From the expected operating current of the HTS coil, the levitation performance of the SH-EM is estimated.

UR - http://www.scopus.com/inward/record.url?scp=84255166696&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84255166696&partnerID=8YFLogxK

U2 - 10.9714/psac.2011.13.3.001

DO - 10.9714/psac.2011.13.3.001

M3 - Article

VL - 13

SP - 1

EP - 4

JO - Progress in Superconductivity and Cryogenics (PSAC)

JF - Progress in Superconductivity and Cryogenics (PSAC)

SN - 1229-3008

IS - 3

ER -