Effect of hydrothermal condition on the formation of multi-component oxides of Ni-based metallic glass under high temperature water near the critical point

J. S. Kim, S. Y. Kim, D. H. Kim, R. T. Ott, H. G. Kim, M. H. Lee

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The specific feature of multi-component oxides synthesized by hydrothermal process under high temperature (633 K) and highly pressurized water (18.9 MPa) near critical point. Effects of hydrothermal processing duration times 24 hours and 72 hours, respectively, on the oxide formation of the Ni59Zr20Ti16Si2Sn3 metallic glass synthesized by powder metallurgy process were characterized by X-ray diffractometer, differential scanning calorimeter along with the particle size, morphology and crystalline phase of the oxides. The crystallization of the needle-shape NiTiO3, ZrTiO4 and ZrSnO4 ternary oxide phases observed on the surface of metallic glass at below glass transition temperature and the morphology of oxide phases changed to plate-shape around 2 μm in diameter by the increase processing time. This hydrothermal processing in subcritical water provides accelerated dense metal oxide crystals due to the reaction medium being at higher pressure than conventional oxidation processing.

Original languageEnglish
Article number077132
JournalAIP Advances
Volume5
Issue number7
DOIs
Publication statusPublished - 2015 Jul 1

Fingerprint

metallic glasses
critical point
oxides
water
powder metallurgy
diffractometers
needles
glass transition temperature
calorimeters
metal oxides
crystallization
oxidation
scanning
crystals
x rays

All Science Journal Classification (ASJC) codes

  • Physics and Astronomy(all)

Cite this

@article{8bb3720114c945278272363865711cf0,
title = "Effect of hydrothermal condition on the formation of multi-component oxides of Ni-based metallic glass under high temperature water near the critical point",
abstract = "The specific feature of multi-component oxides synthesized by hydrothermal process under high temperature (633 K) and highly pressurized water (18.9 MPa) near critical point. Effects of hydrothermal processing duration times 24 hours and 72 hours, respectively, on the oxide formation of the Ni59Zr20Ti16Si2Sn3 metallic glass synthesized by powder metallurgy process were characterized by X-ray diffractometer, differential scanning calorimeter along with the particle size, morphology and crystalline phase of the oxides. The crystallization of the needle-shape NiTiO3, ZrTiO4 and ZrSnO4 ternary oxide phases observed on the surface of metallic glass at below glass transition temperature and the morphology of oxide phases changed to plate-shape around 2 μm in diameter by the increase processing time. This hydrothermal processing in subcritical water provides accelerated dense metal oxide crystals due to the reaction medium being at higher pressure than conventional oxidation processing.",
author = "Kim, {J. S.} and Kim, {S. Y.} and Kim, {D. H.} and Ott, {R. T.} and Kim, {H. G.} and Lee, {M. H.}",
year = "2015",
month = "7",
day = "1",
doi = "10.1063/1.4926972",
language = "English",
volume = "5",
journal = "AIP Advances",
issn = "2158-3226",
publisher = "American Institute of Physics Publising LLC",
number = "7",

}

Effect of hydrothermal condition on the formation of multi-component oxides of Ni-based metallic glass under high temperature water near the critical point. / Kim, J. S.; Kim, S. Y.; Kim, D. H.; Ott, R. T.; Kim, H. G.; Lee, M. H.

In: AIP Advances, Vol. 5, No. 7, 077132, 01.07.2015.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Effect of hydrothermal condition on the formation of multi-component oxides of Ni-based metallic glass under high temperature water near the critical point

AU - Kim, J. S.

AU - Kim, S. Y.

AU - Kim, D. H.

AU - Ott, R. T.

AU - Kim, H. G.

AU - Lee, M. H.

PY - 2015/7/1

Y1 - 2015/7/1

N2 - The specific feature of multi-component oxides synthesized by hydrothermal process under high temperature (633 K) and highly pressurized water (18.9 MPa) near critical point. Effects of hydrothermal processing duration times 24 hours and 72 hours, respectively, on the oxide formation of the Ni59Zr20Ti16Si2Sn3 metallic glass synthesized by powder metallurgy process were characterized by X-ray diffractometer, differential scanning calorimeter along with the particle size, morphology and crystalline phase of the oxides. The crystallization of the needle-shape NiTiO3, ZrTiO4 and ZrSnO4 ternary oxide phases observed on the surface of metallic glass at below glass transition temperature and the morphology of oxide phases changed to plate-shape around 2 μm in diameter by the increase processing time. This hydrothermal processing in subcritical water provides accelerated dense metal oxide crystals due to the reaction medium being at higher pressure than conventional oxidation processing.

AB - The specific feature of multi-component oxides synthesized by hydrothermal process under high temperature (633 K) and highly pressurized water (18.9 MPa) near critical point. Effects of hydrothermal processing duration times 24 hours and 72 hours, respectively, on the oxide formation of the Ni59Zr20Ti16Si2Sn3 metallic glass synthesized by powder metallurgy process were characterized by X-ray diffractometer, differential scanning calorimeter along with the particle size, morphology and crystalline phase of the oxides. The crystallization of the needle-shape NiTiO3, ZrTiO4 and ZrSnO4 ternary oxide phases observed on the surface of metallic glass at below glass transition temperature and the morphology of oxide phases changed to plate-shape around 2 μm in diameter by the increase processing time. This hydrothermal processing in subcritical water provides accelerated dense metal oxide crystals due to the reaction medium being at higher pressure than conventional oxidation processing.

UR - http://www.scopus.com/inward/record.url?scp=84937117052&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84937117052&partnerID=8YFLogxK

U2 - 10.1063/1.4926972

DO - 10.1063/1.4926972

M3 - Article

AN - SCOPUS:84937117052

VL - 5

JO - AIP Advances

JF - AIP Advances

SN - 2158-3226

IS - 7

M1 - 077132

ER -