Pervious pavements materials (PPMs) are prospective functional materials with the potential to make urban areas more environmentally friendly. In this study, the effects of polymer binders on the mechanical and microstructural properties of PPMs are analyzed experimentally and through machine learning. Polyurethane and epoxy, which are widely used due to their reasonable cost and high performance, are considered as polymer binders, and specimens with different aggregate size distributions are fabricated using these polymers. The mechanical properties of the specimens are analyzed using compressive and flexural strength tests, freeze–thaw durability tests, and water permeability tests. Then, the internal microstructure is characterized using micro-computed tomography, including the pore size distribution, pore sphericity, anisotropic ratios of the pores, pore tortuosity, and aggregate sphericity. The correlation between the mechanical properties and the pore structure is analyzed. The aggregate size distribution and the polymer viscosity affects the size of the internal pores, and thus the mechanical properties. Finally, machine learning is used to develop a model that can predict the microstructural properties and compressive strength of PPMs according to the aggregate size distribution and the properties of the polymer. The model was validated using experimental data, and the methods used in its creation could be used to derive a general model for PPMs.
|Journal||Construction and Building Materials|
|Publication status||Published - 2022 Mar 28|
Bibliographical noteFunding Information:
This work was supported by grants from the National Research Foundation (NRF) of Korea funded by the Korean government (MSIT) (2020R1C1C1005063 and NRF-2021R1A4A3030924). In addition, this work was financially supported by the Ministry of the Interior and Safety through the Human Resource Development Project in Earthquake Disaster Management.
© 2021 Elsevier Ltd
All Science Journal Classification (ASJC) codes
- Civil and Structural Engineering
- Building and Construction
- Materials Science(all)