Fabrication and measurement of the performance of a printed EMI shielding mesh filter on PET film

Chung Hwan Kim, Yongshik Lee

Research output: Contribution to journalArticlepeer-review

14 Citations (Scopus)

Abstract

In this paper, Electromagnetic interference (EMI) shielding mesh filter films are fabricated using the screen printing method. An EMI shielding mesh filter requires fine line patterns under 30 μm, therefore, the screen masks with fine-line screen mesh, as well as suitable ink composed of fine metal particles are required. Moreover, because the printed EMI shielding filter has to be fabricated on a PET film, the ink should be sintered at a temperature below 150°C not to deform the film. For the purposes of this study, a screen mesh with a mask of 20 μm line, and ink made nano silver paste with a sintering temperature of 140°C, which could guarantee fine-line patterning on the PET, were used. The ink had a viscosity of 90,000-12,000 cps and metal content of 85% in weight. The printed EMI shielding mesh had a line width of about 24 μm and a thickness of about 2.5 μm. The measured surface resistance was 0.5~0.7 Ω/□, offering good electrical performance as an EMI mesh. A simple measurement system was used to evaluate the electrical shielding performance of the printed EMI shielding mesh. A comparison of the printed EMI shielding mesh with pure film without mesh and copper sheet revealed that the printed EMI shielding mesh is indeed capable of providing good electrical performance.

Original languageEnglish
Pages (from-to)161-164
Number of pages4
JournalInternational Journal of Precision Engineering and Manufacturing
Volume12
Issue number1
DOIs
Publication statusPublished - 2011 Feb

Bibliographical note

Funding Information:
This work was supported by the KCC (Korea Communications Commission) under the CPRC program supervised by the IITA (Institute for Information Technology Advancement) (IITA-2009-C1091-0901-0007).

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Fabrication and measurement of the performance of a printed EMI shielding mesh filter on PET film'. Together they form a unique fingerprint.

Cite this