Abstract
The lifetime and stability of flexible photovoltaic (PV) devices are crucial factors in the production of sustainable and eco-friendly energy. However, flexible PV devices are usually constructed with a thin active material integrated onto a soft substrate, the surfaces of which are prone to moisture and heat damage, making devices unreliable in terms of their lifetime and stability. Here, we built flexible InGaP/GaAs tandem solar cells with an ultrathin thermally grown silicon dioxide layer as a permanent water barrier and an antireflection coating (ARC). By transferring an ultrathin thermally grown silicon dioxide onto flexible InGaP/GaAs tandem solar cells, there was no performance degradation even after soaking the solar cells in water at 70 °C for 10 days. Furthermore, the energy conversion efficiency of the solar cell with a thermally grown silicon dioxide layer was improved by 2.24% due to antirefletion effect compared with that of the solar cells without the silicon dioxide layer. Such device technology establishes a stable energy source not only for vehicles, satellites, and drones exposed to harsh environments but also for underwater operating systems and sensors.
Original language | English |
---|---|
Pages (from-to) | 227-233 |
Number of pages | 7 |
Journal | ACS Applied Energy Materials |
Volume | 5 |
Issue number | 1 |
DOIs | |
Publication status | Published - 2022 Jan 24 |
Bibliographical note
Funding Information:This work is supported by the National Research Foundation of Korea (NRF-2017M1A2A2048904 and 2016910562) and the KIST institutional project (2E31011). Korea photonics technology institute (KOPTI) supplied InGaP/GaAs tandem solar cell wafers.
Publisher Copyright:
©
All Science Journal Classification (ASJC) codes
- Chemical Engineering (miscellaneous)
- Energy Engineering and Power Technology
- Electrochemistry
- Electrical and Electronic Engineering
- Materials Chemistry