Abstract
A design concept of the loop antenna on the metal frame of a smartwatch device for GPS, Bluetooth and Wi-Fi 5 GHz is introduced. The antenna was designed with a 1.5 mm thick, circular metal frame with a diameter of 55 mm. The system ground of a smartwatch is encircled by the metal frame. The open stub and coupling gap inserted into metal frame were set to provide multi-band operation. With the signal feeding and the 1st shorting pin in a proper location, the antenna cover the GPS band. The antenna covers the Bluetooth band with the current loop for GPS and the coupling between stubs. As well as, the antenna covers the Wi-Fi 5 GHz band by shorting the loop with 2nd shorting pin. The design and the results thereof are described and discussed in this paper.
| Original language | English |
|---|---|
| Title of host publication | 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings |
| Publisher | Institute of Electrical and Electronics Engineers Inc. |
| Pages | 2177-2178 |
| Number of pages | 2 |
| ISBN (Electronic) | 9781509028863 |
| DOIs | |
| Publication status | Published - 2016 Oct 25 |
| Event | 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Fajardo, Puerto Rico Duration: 2016 Jun 26 → 2016 Jul 1 |
Publication series
| Name | 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings |
|---|
Other
| Other | 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 |
|---|---|
| Country/Territory | Puerto Rico |
| City | Fajardo |
| Period | 16/6/26 → 16/7/1 |
Bibliographical note
Publisher Copyright:© 2016 IEEE.
All Science Journal Classification (ASJC) codes
- Instrumentation
- Radiation
- Computer Networks and Communications