Heat transfer in rotating channel with inclined pin-fins

Jun Su Park, Kyung Min Kim, Dong Hyun Lee, Hyung Hee Cho, Minking Chyu

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

This study is to examine experimentally the effects of pin inclination and pin height-to-diameter ratio on the heat/mass transfer characteristics in a pin-fin channel with and without rotation. The test model consists of staggered pin-fin arrays with an inter-pin spacing of 2.5 times of the pin-diameter (S/D=2.5) in both longitudinal and transverse directions. Detailed local heat/mass transfer coefficients on the two principal surfaces of rotating channel are measured using the naphthalene sublimation technique. The inclined angles (θ) studied are 60° and 90°. The pin height-to-diameter ratio (H p /D p ) ranges from 2 to 4. The Reynolds number is fixed at 7.0 × 10 3 with two Rotation numbers (0.0 and 0.2). The measured data show that the overall array heat/mass transfer decreases with the angle of inclination relative to the vertical orientation. The overall array averaged as well as the row-resolved heat/mass transfer increases with an increase in H p /D p , Rotation generally results in higher heat/mass transfer than the corresponding stationary case. The non-uniformity or redistribution of heat/mass transfer induced by me Coriolis force generally perceived in a ribbed or smooth channel is less evident in a pin-fin channel.

Original languageEnglish
Title of host publicationProceedings of the ASME Turbo Expo 2009
Subtitle of host publicationPower for Land, Sea and Air
Pages669-678
Number of pages10
EditionPART A
DOIs
Publication statusPublished - 2009 Dec 1
Event2009 ASME Turbo Expo - Orlando, FL, United States
Duration: 2009 Jun 82009 Jun 12

Publication series

NameProceedings of the ASME Turbo Expo
NumberPART A
Volume3

Other

Other2009 ASME Turbo Expo
CountryUnited States
CityOrlando, FL
Period09/6/809/6/12

Fingerprint

Fins (heat exchange)
Mass transfer
Heat transfer
Coriolis force
Sublimation
Naphthalene
Hot Temperature
Reynolds number

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Park, J. S., Kim, K. M., Lee, D. H., Cho, H. H., & Chyu, M. (2009). Heat transfer in rotating channel with inclined pin-fins. In Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air (PART A ed., pp. 669-678). (Proceedings of the ASME Turbo Expo; Vol. 3, No. PART A). https://doi.org/10.1115/GT2009-59741
Park, Jun Su ; Kim, Kyung Min ; Lee, Dong Hyun ; Cho, Hyung Hee ; Chyu, Minking. / Heat transfer in rotating channel with inclined pin-fins. Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART A. ed. 2009. pp. 669-678 (Proceedings of the ASME Turbo Expo; PART A).
@inproceedings{6fc70297c0f5436bbb26236f2c47623b,
title = "Heat transfer in rotating channel with inclined pin-fins",
abstract = "This study is to examine experimentally the effects of pin inclination and pin height-to-diameter ratio on the heat/mass transfer characteristics in a pin-fin channel with and without rotation. The test model consists of staggered pin-fin arrays with an inter-pin spacing of 2.5 times of the pin-diameter (S/D=2.5) in both longitudinal and transverse directions. Detailed local heat/mass transfer coefficients on the two principal surfaces of rotating channel are measured using the naphthalene sublimation technique. The inclined angles (θ) studied are 60° and 90°. The pin height-to-diameter ratio (H p /D p ) ranges from 2 to 4. The Reynolds number is fixed at 7.0 × 10 3 with two Rotation numbers (0.0 and 0.2). The measured data show that the overall array heat/mass transfer decreases with the angle of inclination relative to the vertical orientation. The overall array averaged as well as the row-resolved heat/mass transfer increases with an increase in H p /D p , Rotation generally results in higher heat/mass transfer than the corresponding stationary case. The non-uniformity or redistribution of heat/mass transfer induced by me Coriolis force generally perceived in a ribbed or smooth channel is less evident in a pin-fin channel.",
author = "Park, {Jun Su} and Kim, {Kyung Min} and Lee, {Dong Hyun} and Cho, {Hyung Hee} and Minking Chyu",
year = "2009",
month = "12",
day = "1",
doi = "10.1115/GT2009-59741",
language = "English",
isbn = "9780791848845",
series = "Proceedings of the ASME Turbo Expo",
number = "PART A",
pages = "669--678",
booktitle = "Proceedings of the ASME Turbo Expo 2009",
edition = "PART A",

}

Park, JS, Kim, KM, Lee, DH, Cho, HH & Chyu, M 2009, Heat transfer in rotating channel with inclined pin-fins. in Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART A edn, Proceedings of the ASME Turbo Expo, no. PART A, vol. 3, pp. 669-678, 2009 ASME Turbo Expo, Orlando, FL, United States, 09/6/8. https://doi.org/10.1115/GT2009-59741

Heat transfer in rotating channel with inclined pin-fins. / Park, Jun Su; Kim, Kyung Min; Lee, Dong Hyun; Cho, Hyung Hee; Chyu, Minking.

Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART A. ed. 2009. p. 669-678 (Proceedings of the ASME Turbo Expo; Vol. 3, No. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Heat transfer in rotating channel with inclined pin-fins

AU - Park, Jun Su

AU - Kim, Kyung Min

AU - Lee, Dong Hyun

AU - Cho, Hyung Hee

AU - Chyu, Minking

PY - 2009/12/1

Y1 - 2009/12/1

N2 - This study is to examine experimentally the effects of pin inclination and pin height-to-diameter ratio on the heat/mass transfer characteristics in a pin-fin channel with and without rotation. The test model consists of staggered pin-fin arrays with an inter-pin spacing of 2.5 times of the pin-diameter (S/D=2.5) in both longitudinal and transverse directions. Detailed local heat/mass transfer coefficients on the two principal surfaces of rotating channel are measured using the naphthalene sublimation technique. The inclined angles (θ) studied are 60° and 90°. The pin height-to-diameter ratio (H p /D p ) ranges from 2 to 4. The Reynolds number is fixed at 7.0 × 10 3 with two Rotation numbers (0.0 and 0.2). The measured data show that the overall array heat/mass transfer decreases with the angle of inclination relative to the vertical orientation. The overall array averaged as well as the row-resolved heat/mass transfer increases with an increase in H p /D p , Rotation generally results in higher heat/mass transfer than the corresponding stationary case. The non-uniformity or redistribution of heat/mass transfer induced by me Coriolis force generally perceived in a ribbed or smooth channel is less evident in a pin-fin channel.

AB - This study is to examine experimentally the effects of pin inclination and pin height-to-diameter ratio on the heat/mass transfer characteristics in a pin-fin channel with and without rotation. The test model consists of staggered pin-fin arrays with an inter-pin spacing of 2.5 times of the pin-diameter (S/D=2.5) in both longitudinal and transverse directions. Detailed local heat/mass transfer coefficients on the two principal surfaces of rotating channel are measured using the naphthalene sublimation technique. The inclined angles (θ) studied are 60° and 90°. The pin height-to-diameter ratio (H p /D p ) ranges from 2 to 4. The Reynolds number is fixed at 7.0 × 10 3 with two Rotation numbers (0.0 and 0.2). The measured data show that the overall array heat/mass transfer decreases with the angle of inclination relative to the vertical orientation. The overall array averaged as well as the row-resolved heat/mass transfer increases with an increase in H p /D p , Rotation generally results in higher heat/mass transfer than the corresponding stationary case. The non-uniformity or redistribution of heat/mass transfer induced by me Coriolis force generally perceived in a ribbed or smooth channel is less evident in a pin-fin channel.

UR - http://www.scopus.com/inward/record.url?scp=77953223414&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77953223414&partnerID=8YFLogxK

U2 - 10.1115/GT2009-59741

DO - 10.1115/GT2009-59741

M3 - Conference contribution

SN - 9780791848845

T3 - Proceedings of the ASME Turbo Expo

SP - 669

EP - 678

BT - Proceedings of the ASME Turbo Expo 2009

ER -

Park JS, Kim KM, Lee DH, Cho HH, Chyu M. Heat transfer in rotating channel with inclined pin-fins. In Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART A ed. 2009. p. 669-678. (Proceedings of the ASME Turbo Expo; PART A). https://doi.org/10.1115/GT2009-59741