Hierarchical Atomic Layer Deposited V2O5 on 3D Printed Nanocarbon Electrodes for High-Performance Aqueous Zinc-Ion Batteries

Wanli Gao, Jan Michalička, Martin Pumera

Research output: Contribution to journalArticlepeer-review

Abstract

Aqueous rechargeable zinc-ion batteries (ARZIBs) are promising energy storage systems owing to their ecofriendliness, safety, and cost-efficiency. However, the sluggish Zn2+ diffusion kinetics originated from its inherent large atomic mass and high polarization remains an ongoing challenge. To this end, electrodes with 3D architectures and high porosity are highly desired. This work reports a rational design and fabrication of hierarchical core–shell structured cathodes (3D@V2O5) for ARZIBs by integrating fused deposition modeling (FDM) 3D-printing with atomic layer deposition (ALD). The 3D-printed porous carbon network provides an entangled electron conductive core and interconnected ion diffusion channels, whereas ALD-coated V2O5 serves as an active shell without sacrificing the porosity for facilitated Zn2+ diffusion. This endows the 3D@V2O5 cathode with high specific capacity (425 mAh g−1 at 0.3 A g−1), competitive energy and power densities (316 Wh Kg−1 at 213 W kg−1 and 163 Wh Kg−1 at 3400 W kg−1), and good rate performance (221 mAh g−1 at 4.8 A g−1). The developed 3D@V2O5 cathode provides a promising model for customized and scalable battery electrode engineering technology. As the ALD-coated layer determines the functional properties, the proposed strategy shows a promising prospect of FDM 3D printing using 1D carbon materials for future energy storage.

Original languageEnglish
Article number2105572
JournalSmall
Volume18
Issue number1
DOIs
Publication statusPublished - 2022 Jan 6

Bibliographical note

Funding Information:
M.P. was supported by Grant Agency of the Czech Republic (GACR EXPRO: 19–26896X). W.G. was supported by the ESF under the project CZ.02.2.69/0.0/0.0/20_079/0017436. W.G. and J.M. acknowledge the support of CzechNanoLab Research Infrastructure (ID LM2018110, MEYS CR, 2020‐2022). The authors gratefully thank Dr. Marek Eliáš, Dr. Jan Prášek, and Dr. Radim Zahradníček for ALD assistance, and Dr. Stanislava Matejkova for IPC‐OES measurements and analyses.

Publisher Copyright:
© 2021 Wiley-VCH GmbH

All Science Journal Classification (ASJC) codes

  • Biotechnology
  • Biomaterials
  • Chemistry(all)
  • Materials Science(all)

Fingerprint

Dive into the research topics of 'Hierarchical Atomic Layer Deposited V<sub>2</sub>O<sub>5</sub> on 3D Printed Nanocarbon Electrodes for High-Performance Aqueous Zinc-Ion Batteries'. Together they form a unique fingerprint.

Cite this