High-k perovskite gate oxide for modulation beyond 1014 cm-2

Dowon Song, Myoungho Jeong, Juhan Kim, Bongju Kim, Jae Ha Kim, Jae Hoon Kim, Kiyoung Lee, Yongsung Kim, Kookrin Char

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

Scaling down of semiconductor devices requires high-k dielectric materials to continue lowering the operating voltage of field-effect transistors (FETs) and storing sufficient charge on a smaller area. Here, we investigate the dielectric properties of epitaxial BaHf0.6Ti0.4O3 (BHTO), an alloy of perovskite oxide barium hafnate (BaHfO3) and barium titanate (BaTiO3). We found the dielectric constant, the breakdown field, and the leakage current to be 150, 5.0 megavolts per centimeter (MV cm-1), and 10-4 amperes per square centimeter at 2 MV cm-1, respectively. The results suggest that two-dimensional (2D) carrier density of more than n2D = 1014 per square centimeter (cm-2) could be modulated by the BHTO gate oxide. We demonstrate an n-type accumulation mode FET and direct suppression of more than n2D = 1014 cm-2 via an n-type depletion-mode FET. We attribute the large dielectric constant, high breakdown field, and low leakage current of BHTO to the nanometer scale stoichiometric modulation of hafnium and titanium.

Original languageEnglish
Article numberabm3962
JournalScience Advances
Volume8
Issue number11
DOIs
Publication statusPublished - 2022 Mar

Bibliographical note

Publisher Copyright:
© 2022 The Authors.

All Science Journal Classification (ASJC) codes

  • General

Fingerprint

Dive into the research topics of 'High-k perovskite gate oxide for modulation beyond 1014 cm-2'. Together they form a unique fingerprint.

Cite this