Impedimetric thrombin aptasensor based on chemically modified graphenes

Adeline Huiling Loo, Alessandra Bonanni, Martin Pumera

Research output: Contribution to journalArticle

55 Citations (Scopus)

Abstract

Highly sensitive biosensors are of high importance to the biomedical field. Graphene represents a promising transducing platform for construction of biosensors. Here for the first time we compare the biosensing performance of a wide set of graphenes prepared by different methods. In this work, we present a simple and label-free electrochemical impedimetric aptasensor for thrombin based on chemically modified graphene (CMG) platforms such as graphite oxide (GPO), graphene oxide (GO), thermally reduced graphene oxide (TR-GO) and electrochemically reduced graphene oxide (ER-GO). Disposable screen-printed electrodes were first modified with chemically modified graphene (CMG) materials and used to immobilize a DNA aptamer which is specific to thrombin. The basis of detection relies on the changes in impedance spectra of redox probe after the binding of thrombin to the aptamer. It was discovered that graphene oxide (GO) is the most suitable material to be used as compared to the other three CMG materials. Furthermore, the optimum concentration of aptamer to be immobilized onto the modified electrode surface was determined to be 10 μM and the linear detection range of thrombin was 10-50 nM. Lastly, the aptasensor was found to demonstrate selectivity for thrombin. Such simply fabricated graphene oxide aptasensor shows high promise for clinical diagnosis of biomarkers and point-of-care analysis.

Original languageEnglish
Pages (from-to)143-147
Number of pages5
JournalNanoscale
Volume4
Issue number1
DOIs
Publication statusPublished - 2012 Jan 7

Fingerprint

Graphite
Thrombin
Graphene
Oxides
Biosensors
Nucleotide Aptamers
Electrodes
Biomarkers
Labels
DNA

All Science Journal Classification (ASJC) codes

  • Materials Science(all)

Cite this

Loo, Adeline Huiling ; Bonanni, Alessandra ; Pumera, Martin. / Impedimetric thrombin aptasensor based on chemically modified graphenes. In: Nanoscale. 2012 ; Vol. 4, No. 1. pp. 143-147.
@article{ff8de547a2da4cb190b228bc96c76c8a,
title = "Impedimetric thrombin aptasensor based on chemically modified graphenes",
abstract = "Highly sensitive biosensors are of high importance to the biomedical field. Graphene represents a promising transducing platform for construction of biosensors. Here for the first time we compare the biosensing performance of a wide set of graphenes prepared by different methods. In this work, we present a simple and label-free electrochemical impedimetric aptasensor for thrombin based on chemically modified graphene (CMG) platforms such as graphite oxide (GPO), graphene oxide (GO), thermally reduced graphene oxide (TR-GO) and electrochemically reduced graphene oxide (ER-GO). Disposable screen-printed electrodes were first modified with chemically modified graphene (CMG) materials and used to immobilize a DNA aptamer which is specific to thrombin. The basis of detection relies on the changes in impedance spectra of redox probe after the binding of thrombin to the aptamer. It was discovered that graphene oxide (GO) is the most suitable material to be used as compared to the other three CMG materials. Furthermore, the optimum concentration of aptamer to be immobilized onto the modified electrode surface was determined to be 10 μM and the linear detection range of thrombin was 10-50 nM. Lastly, the aptasensor was found to demonstrate selectivity for thrombin. Such simply fabricated graphene oxide aptasensor shows high promise for clinical diagnosis of biomarkers and point-of-care analysis.",
author = "Loo, {Adeline Huiling} and Alessandra Bonanni and Martin Pumera",
year = "2012",
month = "1",
day = "7",
doi = "10.1039/c1nr10966a",
language = "English",
volume = "4",
pages = "143--147",
journal = "Nanoscale",
issn = "2040-3364",
publisher = "Royal Society of Chemistry",
number = "1",

}

Impedimetric thrombin aptasensor based on chemically modified graphenes. / Loo, Adeline Huiling; Bonanni, Alessandra; Pumera, Martin.

In: Nanoscale, Vol. 4, No. 1, 07.01.2012, p. 143-147.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Impedimetric thrombin aptasensor based on chemically modified graphenes

AU - Loo, Adeline Huiling

AU - Bonanni, Alessandra

AU - Pumera, Martin

PY - 2012/1/7

Y1 - 2012/1/7

N2 - Highly sensitive biosensors are of high importance to the biomedical field. Graphene represents a promising transducing platform for construction of biosensors. Here for the first time we compare the biosensing performance of a wide set of graphenes prepared by different methods. In this work, we present a simple and label-free electrochemical impedimetric aptasensor for thrombin based on chemically modified graphene (CMG) platforms such as graphite oxide (GPO), graphene oxide (GO), thermally reduced graphene oxide (TR-GO) and electrochemically reduced graphene oxide (ER-GO). Disposable screen-printed electrodes were first modified with chemically modified graphene (CMG) materials and used to immobilize a DNA aptamer which is specific to thrombin. The basis of detection relies on the changes in impedance spectra of redox probe after the binding of thrombin to the aptamer. It was discovered that graphene oxide (GO) is the most suitable material to be used as compared to the other three CMG materials. Furthermore, the optimum concentration of aptamer to be immobilized onto the modified electrode surface was determined to be 10 μM and the linear detection range of thrombin was 10-50 nM. Lastly, the aptasensor was found to demonstrate selectivity for thrombin. Such simply fabricated graphene oxide aptasensor shows high promise for clinical diagnosis of biomarkers and point-of-care analysis.

AB - Highly sensitive biosensors are of high importance to the biomedical field. Graphene represents a promising transducing platform for construction of biosensors. Here for the first time we compare the biosensing performance of a wide set of graphenes prepared by different methods. In this work, we present a simple and label-free electrochemical impedimetric aptasensor for thrombin based on chemically modified graphene (CMG) platforms such as graphite oxide (GPO), graphene oxide (GO), thermally reduced graphene oxide (TR-GO) and electrochemically reduced graphene oxide (ER-GO). Disposable screen-printed electrodes were first modified with chemically modified graphene (CMG) materials and used to immobilize a DNA aptamer which is specific to thrombin. The basis of detection relies on the changes in impedance spectra of redox probe after the binding of thrombin to the aptamer. It was discovered that graphene oxide (GO) is the most suitable material to be used as compared to the other three CMG materials. Furthermore, the optimum concentration of aptamer to be immobilized onto the modified electrode surface was determined to be 10 μM and the linear detection range of thrombin was 10-50 nM. Lastly, the aptasensor was found to demonstrate selectivity for thrombin. Such simply fabricated graphene oxide aptasensor shows high promise for clinical diagnosis of biomarkers and point-of-care analysis.

UR - http://www.scopus.com/inward/record.url?scp=83455195476&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=83455195476&partnerID=8YFLogxK

U2 - 10.1039/c1nr10966a

DO - 10.1039/c1nr10966a

M3 - Article

C2 - 22068751

AN - SCOPUS:83455195476

VL - 4

SP - 143

EP - 147

JO - Nanoscale

JF - Nanoscale

SN - 2040-3364

IS - 1

ER -