A molecular photodiode with the hetero-Langmuir-Blodgett (LB) film consisting of an electron donor (D), sensitizer (S), relay (R), and acceptor (A) was fabricated. Ferrocene octadecyl amine (Ferrocene), 7,8-dimethyl-10-dodecyl isoalloxazine (flavin), N-Allyl-N′-[3-propylamido-N″,N″-di(n-octadecyl)]-4,4′ -bipyridium dibromide (viologen) and N-docosilquinolinium tetracyanodimethan (TCNQ) were used as the D, S, R, and A units, respectively. By aligning the hetero-LB film of the D/S/R/A units on indium tin oxide (ITO) coated glass with an aluminum thin film, a molecular photodiode with a Metal/Insulator/Metal (MIM) structure was constructed. The decay of the transient photocurrent of MIM device was measured using a 355 nm Nd:YAG pulse laser as the light source and the charge transfer rate was obtained. The charge transfer rate was faster in the D/S/R/A heterojunction than in S/R and S/R/A heterojunction devices due to less recombination from the A to S and less back electron transport due to the existence of D molecules. Various effects such as the LB film thickness, interface structure, and Schottky barrier on the charge transfer rate were investigated. The results showed that the charge transport efficiency of the molecular photodiode became higher when the LB film thickness increased and the head/head interfaced structure of the S/R hetero LB films was adopted. Furthermore, improvement of the molecular device efficiency occurred when spacer molecules were adopted between the electrode and the LB film.
|Number of pages||7|
|Journal||Colloids and Surfaces A: Physicochemical and Engineering Aspects|
|Publication status||Published - 2002 Mar 26|
All Science Journal Classification (ASJC) codes
- Surfaces and Interfaces
- Physical and Theoretical Chemistry
- Colloid and Surface Chemistry