Laminar morphology development using hybrid EVOH-nylon blends

Sang Young Lee, Sung Chul Kim

Research output: Contribution to journalArticlepeer-review

24 Citations (Scopus)

Abstract

Properties of blends having two types of hybrid dispersed phases as laminar morphology were investigated. The hybrid dispersed phases were prepared by preblending nylon and ethylene-vinyl alcohol (EVOH) in solid state (E+N) and in melt state (E/N). Oxygen and toluene barrier properties through the hybrid-dispersed phases in low-density polyethylene (LDPE) matrix were analyzed considering the morphological changes (number and size of layers). Oxygen barrier properties of the blends of LDPE-E+N hybrid dispersed phase having separate domains of nylon and EVOH were found to be linearly dependent on EVOH composition in the blend, but toluene barrier properties of the blends exhibited negative deviation. The other hybrid dispersed phase (E/N) in LDPE matrix, having comingled dispersed phase of nylon and EVOH, exhibited positive deviations in both oxygen and toluene barrier properties. Tensile properties also showed positive deviation. Basic studies on the melt blend (E/N) of EVOH and nylon 6 showed some miscibility, which was revealed from melting point depression, and positive deviation in complex viscosity and tensile properties of the blend.

Original languageEnglish
Pages (from-to)2001-2014
Number of pages14
JournalJournal of Applied Polymer Science
Volume67
Issue number12
DOIs
Publication statusPublished - 1998 Jan 1

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Surfaces, Coatings and Films
  • Polymers and Plastics
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Laminar morphology development using hybrid EVOH-nylon blends'. Together they form a unique fingerprint.

Cite this