Laser-based characterization of a flame-assisted plasma

M. Sassi, Jungho Hwang, S. Mahalingam, J. W. Daily

Research output: Contribution to journalArticle

Abstract

A well-characterized flame-assisted plasma was developed to understand the role of flow nonuniformities and plasma/wall interactions in plasma devices for use in validation of laser-based Doppler shift spectroscopic methods. A hydrogen/oxygen capillary diffusion flame burner was used as a plasma source, with barium seeded into the reactants to provide a source of ions and electrons. For analysis the plasma was assumed to be a stationary, partially ionized, collision dominated, thermal plasma consisting of barium ions, electrons, and neutrals between two parallel-plate electrodes. The plasma was examined in terms of the continuum equations for ions and electrons, together with Poisson's equation to predict spatial profiles of electron and positive ion density and potential as functions of applied potential. First an analytic solution based on constant plasma properties and negligible diffusion was introduced. The model was then extended by including effects of diffusion and variable plasma properties. Experimentally, current/voltage characteristics of the plasma were measured conventionally, relative ion concentration and temperature were measured with laser-induced fluorescence, and local potential distribution was measured using an electrostatic probe. The diffusionless theory predicted well the bulk behavior of the plasma, but not the correct spatial distributions of ion concentration and potential. The extended model produced a more satisfactory fit to the data. At conditions of 1.4 equivalence ratio, 70 ton pressure, 300 ppm seed concentration, and 100-400 V applied potentials, electric fields of the order of 102-103 V/cm were observed near the powered electrode, and of few tens of V/cm in the bulk of the plasma. The field strength in the sheath ensures the operation of the Doppler shift diagnostics, once the recommendations for LIF signal detectability are fulfilled.

Original languageEnglish
Pages (from-to)417-448
Number of pages32
JournalPlasma Chemistry and Plasma Processing
Volume16
Issue number3
DOIs
Publication statusPublished - 1996 Jan 1

Fingerprint

flames
Plasmas
Lasers
lasers
Ions
Electrons
Doppler effect
Barium
ion concentration
laser induced fluorescence
barium
Plasma devices
Plasma Gases
Plasma sheaths
ions
electrons
Electrodes
Plasma sources
Poisson equation
Beam plasma interactions

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Chemical Engineering(all)
  • Condensed Matter Physics
  • Surfaces, Coatings and Films

Cite this

Sassi, M. ; Hwang, Jungho ; Mahalingam, S. ; Daily, J. W. / Laser-based characterization of a flame-assisted plasma. In: Plasma Chemistry and Plasma Processing. 1996 ; Vol. 16, No. 3. pp. 417-448.
@article{b87f0b1a554b47d1bd6ee5be92c0b76b,
title = "Laser-based characterization of a flame-assisted plasma",
abstract = "A well-characterized flame-assisted plasma was developed to understand the role of flow nonuniformities and plasma/wall interactions in plasma devices for use in validation of laser-based Doppler shift spectroscopic methods. A hydrogen/oxygen capillary diffusion flame burner was used as a plasma source, with barium seeded into the reactants to provide a source of ions and electrons. For analysis the plasma was assumed to be a stationary, partially ionized, collision dominated, thermal plasma consisting of barium ions, electrons, and neutrals between two parallel-plate electrodes. The plasma was examined in terms of the continuum equations for ions and electrons, together with Poisson's equation to predict spatial profiles of electron and positive ion density and potential as functions of applied potential. First an analytic solution based on constant plasma properties and negligible diffusion was introduced. The model was then extended by including effects of diffusion and variable plasma properties. Experimentally, current/voltage characteristics of the plasma were measured conventionally, relative ion concentration and temperature were measured with laser-induced fluorescence, and local potential distribution was measured using an electrostatic probe. The diffusionless theory predicted well the bulk behavior of the plasma, but not the correct spatial distributions of ion concentration and potential. The extended model produced a more satisfactory fit to the data. At conditions of 1.4 equivalence ratio, 70 ton pressure, 300 ppm seed concentration, and 100-400 V applied potentials, electric fields of the order of 102-103 V/cm were observed near the powered electrode, and of few tens of V/cm in the bulk of the plasma. The field strength in the sheath ensures the operation of the Doppler shift diagnostics, once the recommendations for LIF signal detectability are fulfilled.",
author = "M. Sassi and Jungho Hwang and S. Mahalingam and Daily, {J. W.}",
year = "1996",
month = "1",
day = "1",
doi = "10.1007/BF01447154",
language = "English",
volume = "16",
pages = "417--448",
journal = "Plasma Chemistry and Plasma Processing",
issn = "0272-4324",
publisher = "Springer New York",
number = "3",

}

Laser-based characterization of a flame-assisted plasma. / Sassi, M.; Hwang, Jungho; Mahalingam, S.; Daily, J. W.

In: Plasma Chemistry and Plasma Processing, Vol. 16, No. 3, 01.01.1996, p. 417-448.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Laser-based characterization of a flame-assisted plasma

AU - Sassi, M.

AU - Hwang, Jungho

AU - Mahalingam, S.

AU - Daily, J. W.

PY - 1996/1/1

Y1 - 1996/1/1

N2 - A well-characterized flame-assisted plasma was developed to understand the role of flow nonuniformities and plasma/wall interactions in plasma devices for use in validation of laser-based Doppler shift spectroscopic methods. A hydrogen/oxygen capillary diffusion flame burner was used as a plasma source, with barium seeded into the reactants to provide a source of ions and electrons. For analysis the plasma was assumed to be a stationary, partially ionized, collision dominated, thermal plasma consisting of barium ions, electrons, and neutrals between two parallel-plate electrodes. The plasma was examined in terms of the continuum equations for ions and electrons, together with Poisson's equation to predict spatial profiles of electron and positive ion density and potential as functions of applied potential. First an analytic solution based on constant plasma properties and negligible diffusion was introduced. The model was then extended by including effects of diffusion and variable plasma properties. Experimentally, current/voltage characteristics of the plasma were measured conventionally, relative ion concentration and temperature were measured with laser-induced fluorescence, and local potential distribution was measured using an electrostatic probe. The diffusionless theory predicted well the bulk behavior of the plasma, but not the correct spatial distributions of ion concentration and potential. The extended model produced a more satisfactory fit to the data. At conditions of 1.4 equivalence ratio, 70 ton pressure, 300 ppm seed concentration, and 100-400 V applied potentials, electric fields of the order of 102-103 V/cm were observed near the powered electrode, and of few tens of V/cm in the bulk of the plasma. The field strength in the sheath ensures the operation of the Doppler shift diagnostics, once the recommendations for LIF signal detectability are fulfilled.

AB - A well-characterized flame-assisted plasma was developed to understand the role of flow nonuniformities and plasma/wall interactions in plasma devices for use in validation of laser-based Doppler shift spectroscopic methods. A hydrogen/oxygen capillary diffusion flame burner was used as a plasma source, with barium seeded into the reactants to provide a source of ions and electrons. For analysis the plasma was assumed to be a stationary, partially ionized, collision dominated, thermal plasma consisting of barium ions, electrons, and neutrals between two parallel-plate electrodes. The plasma was examined in terms of the continuum equations for ions and electrons, together with Poisson's equation to predict spatial profiles of electron and positive ion density and potential as functions of applied potential. First an analytic solution based on constant plasma properties and negligible diffusion was introduced. The model was then extended by including effects of diffusion and variable plasma properties. Experimentally, current/voltage characteristics of the plasma were measured conventionally, relative ion concentration and temperature were measured with laser-induced fluorescence, and local potential distribution was measured using an electrostatic probe. The diffusionless theory predicted well the bulk behavior of the plasma, but not the correct spatial distributions of ion concentration and potential. The extended model produced a more satisfactory fit to the data. At conditions of 1.4 equivalence ratio, 70 ton pressure, 300 ppm seed concentration, and 100-400 V applied potentials, electric fields of the order of 102-103 V/cm were observed near the powered electrode, and of few tens of V/cm in the bulk of the plasma. The field strength in the sheath ensures the operation of the Doppler shift diagnostics, once the recommendations for LIF signal detectability are fulfilled.

UR - http://www.scopus.com/inward/record.url?scp=0030501974&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0030501974&partnerID=8YFLogxK

U2 - 10.1007/BF01447154

DO - 10.1007/BF01447154

M3 - Article

VL - 16

SP - 417

EP - 448

JO - Plasma Chemistry and Plasma Processing

JF - Plasma Chemistry and Plasma Processing

SN - 0272-4324

IS - 3

ER -