Least mean square estimator for motor frequency measurement based on linear hall sensor

Ga Hyoung Choi, Won Sang Ra, Ki Seok Kwak, Tae Sung Yoon, Jin Bae Park

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Motor frequency can be measured by a hall sensor. Among the many hall sensors, a linear type hall sensor is good at high accuracy frequency measuring problem. However, in general, this linear type hall sensor has DC offset which can vary along sensor's operating voltage change. Therefore, In motor frequency measurement problem using the linear hall sensor, it needs an estimator that can estimate frequency and DC offset simultaneously. In this paper, we propose the least mean square estimator to estimate motor frequency. To verify its performance, we compare the LMS estimator with a commercial analog tachometer. Experimental results shows the proposed LMS estimator works well in varying frequency and stationary DC offset.

Original languageEnglish
Pages (from-to)866-874
Number of pages9
JournalTransactions of the Korean Institute of Electrical Engineers
Volume57
Issue number5
Publication statusPublished - 2008 May 1

Fingerprint

Sensors
Tachometers
Electric potential

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

Cite this

Choi, Ga Hyoung ; Ra, Won Sang ; Kwak, Ki Seok ; Yoon, Tae Sung ; Park, Jin Bae. / Least mean square estimator for motor frequency measurement based on linear hall sensor. In: Transactions of the Korean Institute of Electrical Engineers. 2008 ; Vol. 57, No. 5. pp. 866-874.
@article{7e774a326d3b470baaf738869f354e1e,
title = "Least mean square estimator for motor frequency measurement based on linear hall sensor",
abstract = "Motor frequency can be measured by a hall sensor. Among the many hall sensors, a linear type hall sensor is good at high accuracy frequency measuring problem. However, in general, this linear type hall sensor has DC offset which can vary along sensor's operating voltage change. Therefore, In motor frequency measurement problem using the linear hall sensor, it needs an estimator that can estimate frequency and DC offset simultaneously. In this paper, we propose the least mean square estimator to estimate motor frequency. To verify its performance, we compare the LMS estimator with a commercial analog tachometer. Experimental results shows the proposed LMS estimator works well in varying frequency and stationary DC offset.",
author = "Choi, {Ga Hyoung} and Ra, {Won Sang} and Kwak, {Ki Seok} and Yoon, {Tae Sung} and Park, {Jin Bae}",
year = "2008",
month = "5",
day = "1",
language = "English",
volume = "57",
pages = "866--874",
journal = "Transactions of the Korean Institute of Electrical Engineers",
issn = "1975-8359",
publisher = "Korean Institute of Electrical Engineers",
number = "5",

}

Least mean square estimator for motor frequency measurement based on linear hall sensor. / Choi, Ga Hyoung; Ra, Won Sang; Kwak, Ki Seok; Yoon, Tae Sung; Park, Jin Bae.

In: Transactions of the Korean Institute of Electrical Engineers, Vol. 57, No. 5, 01.05.2008, p. 866-874.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Least mean square estimator for motor frequency measurement based on linear hall sensor

AU - Choi, Ga Hyoung

AU - Ra, Won Sang

AU - Kwak, Ki Seok

AU - Yoon, Tae Sung

AU - Park, Jin Bae

PY - 2008/5/1

Y1 - 2008/5/1

N2 - Motor frequency can be measured by a hall sensor. Among the many hall sensors, a linear type hall sensor is good at high accuracy frequency measuring problem. However, in general, this linear type hall sensor has DC offset which can vary along sensor's operating voltage change. Therefore, In motor frequency measurement problem using the linear hall sensor, it needs an estimator that can estimate frequency and DC offset simultaneously. In this paper, we propose the least mean square estimator to estimate motor frequency. To verify its performance, we compare the LMS estimator with a commercial analog tachometer. Experimental results shows the proposed LMS estimator works well in varying frequency and stationary DC offset.

AB - Motor frequency can be measured by a hall sensor. Among the many hall sensors, a linear type hall sensor is good at high accuracy frequency measuring problem. However, in general, this linear type hall sensor has DC offset which can vary along sensor's operating voltage change. Therefore, In motor frequency measurement problem using the linear hall sensor, it needs an estimator that can estimate frequency and DC offset simultaneously. In this paper, we propose the least mean square estimator to estimate motor frequency. To verify its performance, we compare the LMS estimator with a commercial analog tachometer. Experimental results shows the proposed LMS estimator works well in varying frequency and stationary DC offset.

UR - http://www.scopus.com/inward/record.url?scp=56649106586&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=56649106586&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:56649106586

VL - 57

SP - 866

EP - 874

JO - Transactions of the Korean Institute of Electrical Engineers

JF - Transactions of the Korean Institute of Electrical Engineers

SN - 1975-8359

IS - 5

ER -