Linear tapered slot antennas on LTCC substrate for millimeter-wave applications

Il Kwon Kim, Stephan Pinel, John Papapolymerou, Manos M. Tentzeris, Joy Laskar, Jong Gwan Yook

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

In this paper, one linear tapered slot antenna (LTSA), backed with an air cavity, is proposed and fabricated on low temperature cofired ceramic (LTCC) substrate. Conventionally, when LTSA is designed on LTCC board, due to its high dielectric constant and thickness, the gain and radiation property is degraded seriously. Therefore in this paper, by adopting air cavity in the back side of LTCC substrate, high gain and good endfire radiation pattern can be obtained. Especially, this antenna has broad bandwidth (about from 45 GHz to 75 GHz) and high gain (4.9 - 6.9 dB) property. This antenna can be used for a variety of millimeter-wave applications, due to its easy integrability with 3D LTCC modules.

Original languageEnglish
Title of host publication2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest
Pages483-486
Number of pages4
DOIs
Publication statusPublished - 2005 Dec 1
Event2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting - Washington, DC, United States
Duration: 2005 Jul 32005 Jul 8

Publication series

NameIEEE Antennas and Propagation Society, AP-S International Symposium (Digest)
Volume2 A
ISSN (Print)1522-3965

Other

Other2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting
CountryUnited States
CityWashington, DC
Period05/7/305/7/8

Fingerprint

Slot antennas
Millimeter waves
Substrates
Antennas
Temperature
Directional patterns (antenna)
Air
Permittivity
Bandwidth
Radiation

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

Cite this

Kim, I. K., Pinel, S., Papapolymerou, J., Tentzeris, M. M., Laskar, J., & Yook, J. G. (2005). Linear tapered slot antennas on LTCC substrate for millimeter-wave applications. In 2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest (pp. 483-486). [1551850] (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest); Vol. 2 A). https://doi.org/10.1109/APS.2005.1551850
Kim, Il Kwon ; Pinel, Stephan ; Papapolymerou, John ; Tentzeris, Manos M. ; Laskar, Joy ; Yook, Jong Gwan. / Linear tapered slot antennas on LTCC substrate for millimeter-wave applications. 2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest. 2005. pp. 483-486 (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)).
@inproceedings{ce25ae89c1cb4d1db349e1cc6ce15bb2,
title = "Linear tapered slot antennas on LTCC substrate for millimeter-wave applications",
abstract = "In this paper, one linear tapered slot antenna (LTSA), backed with an air cavity, is proposed and fabricated on low temperature cofired ceramic (LTCC) substrate. Conventionally, when LTSA is designed on LTCC board, due to its high dielectric constant and thickness, the gain and radiation property is degraded seriously. Therefore in this paper, by adopting air cavity in the back side of LTCC substrate, high gain and good endfire radiation pattern can be obtained. Especially, this antenna has broad bandwidth (about from 45 GHz to 75 GHz) and high gain (4.9 - 6.9 dB) property. This antenna can be used for a variety of millimeter-wave applications, due to its easy integrability with 3D LTCC modules.",
author = "Kim, {Il Kwon} and Stephan Pinel and John Papapolymerou and Tentzeris, {Manos M.} and Joy Laskar and Yook, {Jong Gwan}",
year = "2005",
month = "12",
day = "1",
doi = "10.1109/APS.2005.1551850",
language = "English",
isbn = "0780388836",
series = "IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)",
pages = "483--486",
booktitle = "2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest",

}

Kim, IK, Pinel, S, Papapolymerou, J, Tentzeris, MM, Laskar, J & Yook, JG 2005, Linear tapered slot antennas on LTCC substrate for millimeter-wave applications. in 2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest., 1551850, IEEE Antennas and Propagation Society, AP-S International Symposium (Digest), vol. 2 A, pp. 483-486, 2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Washington, DC, United States, 05/7/3. https://doi.org/10.1109/APS.2005.1551850

Linear tapered slot antennas on LTCC substrate for millimeter-wave applications. / Kim, Il Kwon; Pinel, Stephan; Papapolymerou, John; Tentzeris, Manos M.; Laskar, Joy; Yook, Jong Gwan.

2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest. 2005. p. 483-486 1551850 (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest); Vol. 2 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Linear tapered slot antennas on LTCC substrate for millimeter-wave applications

AU - Kim, Il Kwon

AU - Pinel, Stephan

AU - Papapolymerou, John

AU - Tentzeris, Manos M.

AU - Laskar, Joy

AU - Yook, Jong Gwan

PY - 2005/12/1

Y1 - 2005/12/1

N2 - In this paper, one linear tapered slot antenna (LTSA), backed with an air cavity, is proposed and fabricated on low temperature cofired ceramic (LTCC) substrate. Conventionally, when LTSA is designed on LTCC board, due to its high dielectric constant and thickness, the gain and radiation property is degraded seriously. Therefore in this paper, by adopting air cavity in the back side of LTCC substrate, high gain and good endfire radiation pattern can be obtained. Especially, this antenna has broad bandwidth (about from 45 GHz to 75 GHz) and high gain (4.9 - 6.9 dB) property. This antenna can be used for a variety of millimeter-wave applications, due to its easy integrability with 3D LTCC modules.

AB - In this paper, one linear tapered slot antenna (LTSA), backed with an air cavity, is proposed and fabricated on low temperature cofired ceramic (LTCC) substrate. Conventionally, when LTSA is designed on LTCC board, due to its high dielectric constant and thickness, the gain and radiation property is degraded seriously. Therefore in this paper, by adopting air cavity in the back side of LTCC substrate, high gain and good endfire radiation pattern can be obtained. Especially, this antenna has broad bandwidth (about from 45 GHz to 75 GHz) and high gain (4.9 - 6.9 dB) property. This antenna can be used for a variety of millimeter-wave applications, due to its easy integrability with 3D LTCC modules.

UR - http://www.scopus.com/inward/record.url?scp=33846873861&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33846873861&partnerID=8YFLogxK

U2 - 10.1109/APS.2005.1551850

DO - 10.1109/APS.2005.1551850

M3 - Conference contribution

AN - SCOPUS:33846873861

SN - 0780388836

SN - 9780780388833

T3 - IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)

SP - 483

EP - 486

BT - 2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest

ER -

Kim IK, Pinel S, Papapolymerou J, Tentzeris MM, Laskar J, Yook JG. Linear tapered slot antennas on LTCC substrate for millimeter-wave applications. In 2005 IEEE Antennas and Propagation Society International Symposium and USNC/URSI Meeting, Digest. 2005. p. 483-486. 1551850. (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)). https://doi.org/10.1109/APS.2005.1551850