Material Nanoarchitectonics of Functional Polymers and Inorganic Nanomaterials for Smart Supercapacitors

Jongbeom Na; Dehua Zheng; Jeonghun Kim; Mengyou Gao; Alowasheeir Azhar; Jianjian Lin; Yusuke Yamauchi

doi:10.1002/smll.202102397

Material Nanoarchitectonics of Functional Polymers and Inorganic Nanomaterials for Smart Supercapacitors

Jongbeom Na, Dehua Zheng, Jeonghun Kim, Mengyou Gao, Alowasheeir Azhar, Jianjian Lin, Yusuke Yamauchi

Department of Chemical and Biomolecular Engineering

Research output: Contribution to journal › Review article › peer-review

7 Citations (Scopus)

Abstract

Smart supercapacitors are a promising energy storage solution due to their high power density, long cycle life, and low-maintenance requirements. Functional polymers (FPs) and inorganic nanomaterials are used in smart supercapacitors because of the favorable mechanical properties (flexibility and stretchability) of FPs and the energy storage properties of inorganic materials. The complementary properties of these materials facilitate commercial applications of smart supercapacitors in flexible smart wearables, displays, and self-generation, as well as energy storage. Here, an overview of strategies for the development of suitable materials for smart supercapacitors is presented, based on recent literature reports. A range of synthetic techniques are discussed and it is concluded that a combination of organic and inorganic hybrid materials is the best option for realizing smart supercapacitors. This perspective facilitates new strategies for the synthesis of hybrid materials, and the development of material technologies for smart energy storage applications.

Original language	English
Article number	2102397
Journal	Small
Volume	18
Issue number	7
DOIs	https://doi.org/10.1002/smll.202102397
Publication status	Published - 2022 Feb 17

Bibliographical note

Funding Information:
J.N. and D.Z. contributed equally to this work. This work was supported by the China Postdoctoral Science Foundation (Grant No. 2019M650160), the National Natural Science Foundation of China (NSFC), (Grant No. 21701096), and the Qingdao Applied Basic Research Project (Grant No. 19‐6‐2‐17‐cg). This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (Grant No. 2020R1A6A3A03039037). J.L. was supported by the Young Taishan Scholarship Project of Shandong Province (Grant No. tsqn201909115). This work was also performed in part at the Queensland node of the Australian National Fabrication Facility (ANFF‐Q), a company established under the National Collaborative Research Infrastructure Strategy to provide nano and microfabrication facilities for Australian researchers.

Funding Information:
J.N. and D.Z. contributed equally to this work. This work was supported by the China Postdoctoral Science Foundation (Grant No. 2019M650160), the National Natural Science Foundation of China (NSFC), (Grant No. 21701096), and the Qingdao Applied Basic Research Project (Grant No. 19-6-2-17-cg). This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (Grant No. 2020R1A6A3A03039037). J.L. was supported by the Young Taishan Scholarship Project of Shandong Province (Grant No. tsqn201909115). This work was also performed in part at the Queensland node of the Australian National Fabrication Facility (ANFF-Q), a company established under the National Collaborative Research Infrastructure Strategy to provide nano and microfabrication facilities for Australian researchers.

Publisher Copyright:
© 2021 Wiley-VCH GmbH

All Science Journal Classification (ASJC) codes

Chemistry(all)
Materials Science(all)
Biotechnology
Biomaterials

Access to Document

10.1002/smll.202102397

Cite this

@article{dccc2c6c629b44008ba14e172e00a570,

title = "Material Nanoarchitectonics of Functional Polymers and Inorganic Nanomaterials for Smart Supercapacitors",

abstract = "Smart supercapacitors are a promising energy storage solution due to their high power density, long cycle life, and low-maintenance requirements. Functional polymers (FPs) and inorganic nanomaterials are used in smart supercapacitors because of the favorable mechanical properties (flexibility and stretchability) of FPs and the energy storage properties of inorganic materials. The complementary properties of these materials facilitate commercial applications of smart supercapacitors in flexible smart wearables, displays, and self-generation, as well as energy storage. Here, an overview of strategies for the development of suitable materials for smart supercapacitors is presented, based on recent literature reports. A range of synthetic techniques are discussed and it is concluded that a combination of organic and inorganic hybrid materials is the best option for realizing smart supercapacitors. This perspective facilitates new strategies for the synthesis of hybrid materials, and the development of material technologies for smart energy storage applications.",

author = "Jongbeom Na and Dehua Zheng and Jeonghun Kim and Mengyou Gao and Alowasheeir Azhar and Jianjian Lin and Yusuke Yamauchi",

note = "Funding Information: J.N. and D.Z. contributed equally to this work. This work was supported by the China Postdoctoral Science Foundation (Grant No. 2019M650160), the National Natural Science Foundation of China (NSFC), (Grant No. 21701096), and the Qingdao Applied Basic Research Project (Grant No. 19‐6‐2‐17‐cg). This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (Grant No. 2020R1A6A3A03039037). J.L. was supported by the Young Taishan Scholarship Project of Shandong Province (Grant No. tsqn201909115). This work was also performed in part at the Queensland node of the Australian National Fabrication Facility (ANFF‐Q), a company established under the National Collaborative Research Infrastructure Strategy to provide nano and microfabrication facilities for Australian researchers. Funding Information: J.N. and D.Z. contributed equally to this work. This work was supported by the China Postdoctoral Science Foundation (Grant No. 2019M650160), the National Natural Science Foundation of China (NSFC), (Grant No. 21701096), and the Qingdao Applied Basic Research Project (Grant No. 19-6-2-17-cg). This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (Grant No. 2020R1A6A3A03039037). J.L. was supported by the Young Taishan Scholarship Project of Shandong Province (Grant No. tsqn201909115). This work was also performed in part at the Queensland node of the Australian National Fabrication Facility (ANFF-Q), a company established under the National Collaborative Research Infrastructure Strategy to provide nano and microfabrication facilities for Australian researchers. Publisher Copyright: {\textcopyright} 2021 Wiley-VCH GmbH",

year = "2022",

month = feb,

day = "17",

doi = "10.1002/smll.202102397",

language = "English",

volume = "18",

journal = "Small",

issn = "1613-6810",

publisher = "Wiley-VCH Verlag",

number = "7",

}

TY - JOUR

T1 - Material Nanoarchitectonics of Functional Polymers and Inorganic Nanomaterials for Smart Supercapacitors

AU - Na, Jongbeom

AU - Zheng, Dehua

AU - Kim, Jeonghun

AU - Gao, Mengyou

AU - Azhar, Alowasheeir

AU - Lin, Jianjian

AU - Yamauchi, Yusuke

N1 - Funding Information: J.N. and D.Z. contributed equally to this work. This work was supported by the China Postdoctoral Science Foundation (Grant No. 2019M650160), the National Natural Science Foundation of China (NSFC), (Grant No. 21701096), and the Qingdao Applied Basic Research Project (Grant No. 19‐6‐2‐17‐cg). This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (Grant No. 2020R1A6A3A03039037). J.L. was supported by the Young Taishan Scholarship Project of Shandong Province (Grant No. tsqn201909115). This work was also performed in part at the Queensland node of the Australian National Fabrication Facility (ANFF‐Q), a company established under the National Collaborative Research Infrastructure Strategy to provide nano and microfabrication facilities for Australian researchers. Funding Information: J.N. and D.Z. contributed equally to this work. This work was supported by the China Postdoctoral Science Foundation (Grant No. 2019M650160), the National Natural Science Foundation of China (NSFC), (Grant No. 21701096), and the Qingdao Applied Basic Research Project (Grant No. 19-6-2-17-cg). This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (Grant No. 2020R1A6A3A03039037). J.L. was supported by the Young Taishan Scholarship Project of Shandong Province (Grant No. tsqn201909115). This work was also performed in part at the Queensland node of the Australian National Fabrication Facility (ANFF-Q), a company established under the National Collaborative Research Infrastructure Strategy to provide nano and microfabrication facilities for Australian researchers. Publisher Copyright: © 2021 Wiley-VCH GmbH

PY - 2022/2/17

Y1 - 2022/2/17

N2 - Smart supercapacitors are a promising energy storage solution due to their high power density, long cycle life, and low-maintenance requirements. Functional polymers (FPs) and inorganic nanomaterials are used in smart supercapacitors because of the favorable mechanical properties (flexibility and stretchability) of FPs and the energy storage properties of inorganic materials. The complementary properties of these materials facilitate commercial applications of smart supercapacitors in flexible smart wearables, displays, and self-generation, as well as energy storage. Here, an overview of strategies for the development of suitable materials for smart supercapacitors is presented, based on recent literature reports. A range of synthetic techniques are discussed and it is concluded that a combination of organic and inorganic hybrid materials is the best option for realizing smart supercapacitors. This perspective facilitates new strategies for the synthesis of hybrid materials, and the development of material technologies for smart energy storage applications.

AB - Smart supercapacitors are a promising energy storage solution due to their high power density, long cycle life, and low-maintenance requirements. Functional polymers (FPs) and inorganic nanomaterials are used in smart supercapacitors because of the favorable mechanical properties (flexibility and stretchability) of FPs and the energy storage properties of inorganic materials. The complementary properties of these materials facilitate commercial applications of smart supercapacitors in flexible smart wearables, displays, and self-generation, as well as energy storage. Here, an overview of strategies for the development of suitable materials for smart supercapacitors is presented, based on recent literature reports. A range of synthetic techniques are discussed and it is concluded that a combination of organic and inorganic hybrid materials is the best option for realizing smart supercapacitors. This perspective facilitates new strategies for the synthesis of hybrid materials, and the development of material technologies for smart energy storage applications.

UR - http://www.scopus.com/inward/record.url?scp=85120485629&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85120485629&partnerID=8YFLogxK

U2 - 10.1002/smll.202102397

DO - 10.1002/smll.202102397

M3 - Review article

C2 - 34862722

AN - SCOPUS:85120485629

SN - 1613-6810

VL - 18

JO - Small

JF - Small

IS - 7

M1 - 2102397

ER -

Material Nanoarchitectonics of Functional Polymers and Inorganic Nanomaterials for Smart Supercapacitors

Abstract

Bibliographical note

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this