Morphometric analysis of maxillary alveolar regions for immediate implantation

Man Soo Park, Young Bum Park, Hyunmin Choi, Hong Seok Moon, Moon Kyu Chung, In Ho Cha, Hee Jin Kim, Dong Hoo Han

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Purpose: The purpose of this study was to provide an actual guideline in determining the shape, diameter, and position of the implant in immediate implantation by the measurement of the thickness of facial and palatal plate, the thickness of cortical bone on the facial and palatal plate, the diameter of the root, and the distance between the roots in the cadavers. Materials and Methods: The horizontal sections of 20 maxillae were measured and analyzed to obtain the average values. Resin blocks were produced and cut serially at 1 mm intervals from the cervical line to the root apex. Images of each section were obtained and the following measurements were performed: The thickness of the facial and palatal residual bone at each root surface, the thickness of the facial and palatal cortical bone at the interdental region, the diameter of all roots of each section on the faciopalatal and mesiodistal diameter, and the interroot distance. Three specimens with measurements close to the average values were chosen and 3-dimensional images were reconstructed. Results: The thickness of the facial and palatal cortical bone at the interdental region in the maxilla, the buccal cortical bone was thicker in the posterior region compared to the anterior region. The interroot distance of the alveolar bone thickness between the roots increased from anterior to posterior region and from coronal to apical in the maxilla. Conclusion: In this study, the limited results of the morphometric analysis of the alveolar ridge using the sections of maxilla in the cadavers may offer the useful information when planning and selecting optimal implant for immediate implantation in the maxilla.

Original languageEnglish
Pages (from-to)494-501
Number of pages8
JournalJournal of Advanced Prosthodontics
Volume5
Issue number4
DOIs
Publication statusPublished - 2013 Nov 1

Fingerprint

Maxilla
Cadaver
Zygoma
Alveolar Process
Bone and Bones
Guidelines
Cortical Bone

All Science Journal Classification (ASJC) codes

  • Oral Surgery
  • Dentistry (miscellaneous)

Cite this

Park, Man Soo ; Park, Young Bum ; Choi, Hyunmin ; Moon, Hong Seok ; Chung, Moon Kyu ; Cha, In Ho ; Kim, Hee Jin ; Han, Dong Hoo. / Morphometric analysis of maxillary alveolar regions for immediate implantation. In: Journal of Advanced Prosthodontics. 2013 ; Vol. 5, No. 4. pp. 494-501.
@article{e090e10b4b6b47a592a5e098faf81147,
title = "Morphometric analysis of maxillary alveolar regions for immediate implantation",
abstract = "Purpose: The purpose of this study was to provide an actual guideline in determining the shape, diameter, and position of the implant in immediate implantation by the measurement of the thickness of facial and palatal plate, the thickness of cortical bone on the facial and palatal plate, the diameter of the root, and the distance between the roots in the cadavers. Materials and Methods: The horizontal sections of 20 maxillae were measured and analyzed to obtain the average values. Resin blocks were produced and cut serially at 1 mm intervals from the cervical line to the root apex. Images of each section were obtained and the following measurements were performed: The thickness of the facial and palatal residual bone at each root surface, the thickness of the facial and palatal cortical bone at the interdental region, the diameter of all roots of each section on the faciopalatal and mesiodistal diameter, and the interroot distance. Three specimens with measurements close to the average values were chosen and 3-dimensional images were reconstructed. Results: The thickness of the facial and palatal cortical bone at the interdental region in the maxilla, the buccal cortical bone was thicker in the posterior region compared to the anterior region. The interroot distance of the alveolar bone thickness between the roots increased from anterior to posterior region and from coronal to apical in the maxilla. Conclusion: In this study, the limited results of the morphometric analysis of the alveolar ridge using the sections of maxilla in the cadavers may offer the useful information when planning and selecting optimal implant for immediate implantation in the maxilla.",
author = "Park, {Man Soo} and Park, {Young Bum} and Hyunmin Choi and Moon, {Hong Seok} and Chung, {Moon Kyu} and Cha, {In Ho} and Kim, {Hee Jin} and Han, {Dong Hoo}",
year = "2013",
month = "11",
day = "1",
doi = "10.4047/jap.2013.5.4.494",
language = "English",
volume = "5",
pages = "494--501",
journal = "Journal of Advanced Prosthodontics",
issn = "2005-7806",
publisher = "The Korean Academy of prosthodontics",
number = "4",

}

Morphometric analysis of maxillary alveolar regions for immediate implantation. / Park, Man Soo; Park, Young Bum; Choi, Hyunmin; Moon, Hong Seok; Chung, Moon Kyu; Cha, In Ho; Kim, Hee Jin; Han, Dong Hoo.

In: Journal of Advanced Prosthodontics, Vol. 5, No. 4, 01.11.2013, p. 494-501.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Morphometric analysis of maxillary alveolar regions for immediate implantation

AU - Park, Man Soo

AU - Park, Young Bum

AU - Choi, Hyunmin

AU - Moon, Hong Seok

AU - Chung, Moon Kyu

AU - Cha, In Ho

AU - Kim, Hee Jin

AU - Han, Dong Hoo

PY - 2013/11/1

Y1 - 2013/11/1

N2 - Purpose: The purpose of this study was to provide an actual guideline in determining the shape, diameter, and position of the implant in immediate implantation by the measurement of the thickness of facial and palatal plate, the thickness of cortical bone on the facial and palatal plate, the diameter of the root, and the distance between the roots in the cadavers. Materials and Methods: The horizontal sections of 20 maxillae were measured and analyzed to obtain the average values. Resin blocks were produced and cut serially at 1 mm intervals from the cervical line to the root apex. Images of each section were obtained and the following measurements were performed: The thickness of the facial and palatal residual bone at each root surface, the thickness of the facial and palatal cortical bone at the interdental region, the diameter of all roots of each section on the faciopalatal and mesiodistal diameter, and the interroot distance. Three specimens with measurements close to the average values were chosen and 3-dimensional images were reconstructed. Results: The thickness of the facial and palatal cortical bone at the interdental region in the maxilla, the buccal cortical bone was thicker in the posterior region compared to the anterior region. The interroot distance of the alveolar bone thickness between the roots increased from anterior to posterior region and from coronal to apical in the maxilla. Conclusion: In this study, the limited results of the morphometric analysis of the alveolar ridge using the sections of maxilla in the cadavers may offer the useful information when planning and selecting optimal implant for immediate implantation in the maxilla.

AB - Purpose: The purpose of this study was to provide an actual guideline in determining the shape, diameter, and position of the implant in immediate implantation by the measurement of the thickness of facial and palatal plate, the thickness of cortical bone on the facial and palatal plate, the diameter of the root, and the distance between the roots in the cadavers. Materials and Methods: The horizontal sections of 20 maxillae were measured and analyzed to obtain the average values. Resin blocks were produced and cut serially at 1 mm intervals from the cervical line to the root apex. Images of each section were obtained and the following measurements were performed: The thickness of the facial and palatal residual bone at each root surface, the thickness of the facial and palatal cortical bone at the interdental region, the diameter of all roots of each section on the faciopalatal and mesiodistal diameter, and the interroot distance. Three specimens with measurements close to the average values were chosen and 3-dimensional images were reconstructed. Results: The thickness of the facial and palatal cortical bone at the interdental region in the maxilla, the buccal cortical bone was thicker in the posterior region compared to the anterior region. The interroot distance of the alveolar bone thickness between the roots increased from anterior to posterior region and from coronal to apical in the maxilla. Conclusion: In this study, the limited results of the morphometric analysis of the alveolar ridge using the sections of maxilla in the cadavers may offer the useful information when planning and selecting optimal implant for immediate implantation in the maxilla.

UR - http://www.scopus.com/inward/record.url?scp=84891046555&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84891046555&partnerID=8YFLogxK

U2 - 10.4047/jap.2013.5.4.494

DO - 10.4047/jap.2013.5.4.494

M3 - Article

AN - SCOPUS:84891046555

VL - 5

SP - 494

EP - 501

JO - Journal of Advanced Prosthodontics

JF - Journal of Advanced Prosthodontics

SN - 2005-7806

IS - 4

ER -