Non-destructive evaluation of an internal adaptation of resin composite restoration with swept-source optical coherence tomography and micro-CT

Seung Hoon Han, Alireza Sadr, Junji Tagami, Sung Ho Park

Research output: Contribution to journalArticle

22 Citations (Scopus)

Abstract

Swept-source optical coherence tomography (SS-OCT) and micro-CT can be useful non-destructive methods for evaluating internal adaptation. There is no comparative study evaluating the two methods in the assessment of internal adaptation in composite restoration. The purpose of this study was to compare internal adaptation measurements of SS-OCT and micro-CT. Two cylindrical cavities were created on the labial surface of twelve bovine incisors. The 24 cavities were randomly assigned to four groups of dentin adhesives: (1) three-step etch-and-rinse adhesive, (2) two-step etch-and-rinse adhesive, (3) two-step self-etch adhesive, and (4) one-step self-etch adhesive. After application, the cavities were filled with resin composite. All restorations underwent a thermocycling challenge, and then, eight SS-OCT images were taken using a Santec OCT-2000™ (Santec Co., Komaki, Japan). The internal adaptation was also evaluated using micro-CT (Skyscan, Aartselaar, Belgium). The image analysis was used to calculate the percentage of defective spot (%DS) and compare the results. The groups were compared using one-way ANOVA with Duncan analysis at the 95% significance level. The SS-OCT and micro-CT measurements were compared with a paired t-test, and the relationship was analyzed using a Pearson correlation test at the 95% significance level. The %DS results showed that Group 3 < Group 4 < Group 1 < Group 2 on both SS-OCT and micro-CT images. The %DSs on micro-CT were lower than SS-OCT (p < 0.05) and the Pearson correlation coefficient between SS-OCT and micro-CT was r = 0.787 (p < 0.05).

Original languageEnglish
Pages (from-to)e1-e7
JournalDental Materials
Volume32
Issue number1
DOIs
Publication statusPublished - 2016 Jan 1

Fingerprint

Composite Resins
Optical tomography
Optical Coherence Tomography
Restoration
Resins
Adhesives
Composite materials
Belgium
Thermal cycling
Dentin
Incisor
Lip
Analysis of variance (ANOVA)
Image analysis
Analysis of Variance
Japan

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Dentistry(all)
  • Mechanics of Materials

Cite this

@article{fdaebb3007324f19b9845190eacbe65d,
title = "Non-destructive evaluation of an internal adaptation of resin composite restoration with swept-source optical coherence tomography and micro-CT",
abstract = "Swept-source optical coherence tomography (SS-OCT) and micro-CT can be useful non-destructive methods for evaluating internal adaptation. There is no comparative study evaluating the two methods in the assessment of internal adaptation in composite restoration. The purpose of this study was to compare internal adaptation measurements of SS-OCT and micro-CT. Two cylindrical cavities were created on the labial surface of twelve bovine incisors. The 24 cavities were randomly assigned to four groups of dentin adhesives: (1) three-step etch-and-rinse adhesive, (2) two-step etch-and-rinse adhesive, (3) two-step self-etch adhesive, and (4) one-step self-etch adhesive. After application, the cavities were filled with resin composite. All restorations underwent a thermocycling challenge, and then, eight SS-OCT images were taken using a Santec OCT-2000™ (Santec Co., Komaki, Japan). The internal adaptation was also evaluated using micro-CT (Skyscan, Aartselaar, Belgium). The image analysis was used to calculate the percentage of defective spot ({\%}DS) and compare the results. The groups were compared using one-way ANOVA with Duncan analysis at the 95{\%} significance level. The SS-OCT and micro-CT measurements were compared with a paired t-test, and the relationship was analyzed using a Pearson correlation test at the 95{\%} significance level. The {\%}DS results showed that Group 3 < Group 4 < Group 1 < Group 2 on both SS-OCT and micro-CT images. The {\%}DSs on micro-CT were lower than SS-OCT (p < 0.05) and the Pearson correlation coefficient between SS-OCT and micro-CT was r = 0.787 (p < 0.05).",
author = "Han, {Seung Hoon} and Alireza Sadr and Junji Tagami and Park, {Sung Ho}",
year = "2016",
month = "1",
day = "1",
doi = "10.1016/j.dental.2015.10.009",
language = "English",
volume = "32",
pages = "e1--e7",
journal = "Dental Materials",
issn = "0109-5641",
publisher = "Elsevier Science",
number = "1",

}

Non-destructive evaluation of an internal adaptation of resin composite restoration with swept-source optical coherence tomography and micro-CT. / Han, Seung Hoon; Sadr, Alireza; Tagami, Junji; Park, Sung Ho.

In: Dental Materials, Vol. 32, No. 1, 01.01.2016, p. e1-e7.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Non-destructive evaluation of an internal adaptation of resin composite restoration with swept-source optical coherence tomography and micro-CT

AU - Han, Seung Hoon

AU - Sadr, Alireza

AU - Tagami, Junji

AU - Park, Sung Ho

PY - 2016/1/1

Y1 - 2016/1/1

N2 - Swept-source optical coherence tomography (SS-OCT) and micro-CT can be useful non-destructive methods for evaluating internal adaptation. There is no comparative study evaluating the two methods in the assessment of internal adaptation in composite restoration. The purpose of this study was to compare internal adaptation measurements of SS-OCT and micro-CT. Two cylindrical cavities were created on the labial surface of twelve bovine incisors. The 24 cavities were randomly assigned to four groups of dentin adhesives: (1) three-step etch-and-rinse adhesive, (2) two-step etch-and-rinse adhesive, (3) two-step self-etch adhesive, and (4) one-step self-etch adhesive. After application, the cavities were filled with resin composite. All restorations underwent a thermocycling challenge, and then, eight SS-OCT images were taken using a Santec OCT-2000™ (Santec Co., Komaki, Japan). The internal adaptation was also evaluated using micro-CT (Skyscan, Aartselaar, Belgium). The image analysis was used to calculate the percentage of defective spot (%DS) and compare the results. The groups were compared using one-way ANOVA with Duncan analysis at the 95% significance level. The SS-OCT and micro-CT measurements were compared with a paired t-test, and the relationship was analyzed using a Pearson correlation test at the 95% significance level. The %DS results showed that Group 3 < Group 4 < Group 1 < Group 2 on both SS-OCT and micro-CT images. The %DSs on micro-CT were lower than SS-OCT (p < 0.05) and the Pearson correlation coefficient between SS-OCT and micro-CT was r = 0.787 (p < 0.05).

AB - Swept-source optical coherence tomography (SS-OCT) and micro-CT can be useful non-destructive methods for evaluating internal adaptation. There is no comparative study evaluating the two methods in the assessment of internal adaptation in composite restoration. The purpose of this study was to compare internal adaptation measurements of SS-OCT and micro-CT. Two cylindrical cavities were created on the labial surface of twelve bovine incisors. The 24 cavities were randomly assigned to four groups of dentin adhesives: (1) three-step etch-and-rinse adhesive, (2) two-step etch-and-rinse adhesive, (3) two-step self-etch adhesive, and (4) one-step self-etch adhesive. After application, the cavities were filled with resin composite. All restorations underwent a thermocycling challenge, and then, eight SS-OCT images were taken using a Santec OCT-2000™ (Santec Co., Komaki, Japan). The internal adaptation was also evaluated using micro-CT (Skyscan, Aartselaar, Belgium). The image analysis was used to calculate the percentage of defective spot (%DS) and compare the results. The groups were compared using one-way ANOVA with Duncan analysis at the 95% significance level. The SS-OCT and micro-CT measurements were compared with a paired t-test, and the relationship was analyzed using a Pearson correlation test at the 95% significance level. The %DS results showed that Group 3 < Group 4 < Group 1 < Group 2 on both SS-OCT and micro-CT images. The %DSs on micro-CT were lower than SS-OCT (p < 0.05) and the Pearson correlation coefficient between SS-OCT and micro-CT was r = 0.787 (p < 0.05).

UR - http://www.scopus.com/inward/record.url?scp=84955294363&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84955294363&partnerID=8YFLogxK

U2 - 10.1016/j.dental.2015.10.009

DO - 10.1016/j.dental.2015.10.009

M3 - Article

C2 - 26614427

AN - SCOPUS:84955294363

VL - 32

SP - e1-e7

JO - Dental Materials

JF - Dental Materials

SN - 0109-5641

IS - 1

ER -