In this work, anode-supported protonic ceramic fuel cell (PCFC) with thin yttrium doped barium zirconate (BZY) is fabricated using pulsed laser deposition (PLD). For highly dense and thin electrolyte film growth, anode functional layer and anode interlayer are deposited on porous anode support by electrostatic slurry spray deposition and PLD, respectively. As a result, high open circuit voltage of 0.98 V is obtained after anode reduction at 600°C, indicating that the fabricated BZY electrolyte effectively blocks gas permeation. Electrochemical performance of the PCFC is obtained with peak power densities of 55-171 mW/cm2 at an operating temperature regime of 450-600°C.
|Title of host publication||Solid Oxide Fuel Cells 14, SOFC 2015|
|Editors||K. Eguchi, S. C. Singhal|
|Publisher||Electrochemical Society Inc.|
|Number of pages||4|
|Publication status||Published - 2015|
|Event||14th International Symposium on Solid Oxide Fuel Cells, SOFC 2015; held as part of the Electrochemical Society, ECS Conference on Electrochemical Energy Conversion and Storage - Glasgow, United Kingdom|
Duration: 2015 Jul 26 → 2015 Jul 31
|Other||14th International Symposium on Solid Oxide Fuel Cells, SOFC 2015; held as part of the Electrochemical Society, ECS Conference on Electrochemical Energy Conversion and Storage|
|Period||15/7/26 → 15/7/31|
Bibliographical notePublisher Copyright:
© The Electrochemical Society.
All Science Journal Classification (ASJC) codes