Properties of Cu, Ni, and v doped-LaCrO 3 interconnect materials prepared by pechini, ultrasonic spray pyrolysis and glycine nitrate processes for SOFC

Gil Yong Lee, Rak Hyun Song, Jong Hee Kim, Dong Hyun Peck, Tak Hyoung Lim, Yong Gun Shul, Dong Ryul Shin

Research output: Contribution to journalArticle

17 Citations (Scopus)


The ceramic interconnect,La0.8Sr0.05Ca 0.15(Cr1 -x , Bx)O3 (B = Cu, Ni, V, x = 0.02, 0.1, 0.5) (LSCCB) powders were prepared by Pechini method, Ultrasonic Spray Pyrolysis (USP) and Glycine Nitrate Process (GNP). Nano sized powders were synthesized by GNP and their chemical compositions were confirmed by ICP analysis. The electrical conductivities of LSCCCu, LSCCNi, and LSCCV samples were 34 S/cm, 48 S/cm, and 22 S/cm at 800°C in air, respectively. Among the LSCCB powders, the LSCCNi sample shows highest relative density and electrical conductivity. In a low oxygen partial pressure, however, LSCCV sample was more stable. The perovskite phase of the composition LSCCV sample is of large practical interest for interconnects in SOFC because of the stability in low oxygen partial pressure.

Original languageEnglish
Pages (from-to)723-727
Number of pages5
JournalJournal of Electroceramics
Issue number2-4
Publication statusPublished - 2006 Dec 1


All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Condensed Matter Physics
  • Mechanics of Materials
  • Electrical and Electronic Engineering
  • Materials Chemistry

Cite this