Regenerated bone pattern around exposed implants with various designs

Chong Hyun Han, Sunjai Kim, Moon Kyu Chung, Seong Joo Heo, In Chul Rhyu, Yong uk Kwon, Jae Seung Chang

Research output: Contribution to journalArticlepeer-review

Abstract

Purpose: The design and surface features of dental implants substantially affect the healing and remodeling of adjacent bones. This study aimed to investigate the impact of design and surface on bone regeneration using implants of two different pitches, each with three different surface features. Materials and Methods: Custom-manufactured titanium implants (length, 10 mm; diameter, 3.5 mm) were divided along the major axis into two sections: one with 0.6-mm pitch and the other with 0.4-mm pitch. They were processed by turned, blasting and etching, and anodic oxidation surface treatments and implanted into rabbit tibia. The upper 4 mm of the inserted implants was exposed, and bone regeneration was induced around the exposed area using a titanium chamber (height: 4 mm) containing particulate autogenous and bovine bone. After a 12-week healing period, the quantity and quality of bone regeneration around the implants were evaluated. Thirty specimens-10 specimens each from the turned, blasting and etching, and anodic oxidation surface groups with 0.6- and 0.4-mm-pitch sizes-were evaluated by histomorphometric analysis. Results: The vertical height and width of regenerated bone around blasting and etching and anodic oxidation surfaces were significantly greater than those around turned implants (P < .05); the vertical heights of regenerated bone around the 0.4-mm-pitch sections of blasting and etching and anodic oxidation surfaces were significantly greater than those around the 0.6-mm-pitch sections (P < .05). Both blasting and etching and anodic oxidation surfaces exhibited significantly greater bone-to-implant contact and bone volume at the implant thread than turned implants (P < .05). However, there was no significant difference between the 0.6- and 0.4-mm-pitch sections. Conclusion: The findings of this study indicate that blasting and etching and anodic oxidation surfaces with a 0.4-mm-pitch design result in greater vertical ingrowth of regenerated bone than those with a 0.6-mm-pitch design.

Original languageEnglish
Pages (from-to)61-67
Number of pages7
JournalInternational Journal of Oral and Maxillofacial Implants
Volume34
Issue number1
DOIs
Publication statusPublished - 2019

Bibliographical note

Publisher Copyright:
© 2019 by Quintessence Publishing Co Inc.

All Science Journal Classification (ASJC) codes

  • Oral Surgery

Cite this