Resistance estimation of a pwm-driven solenoid

H. G. Jung, J. Y. Hwang, P. J. Yoon, J. H. Kim

Research output: Contribution to journalArticle

15 Citations (Scopus)

Abstract

This paper proposes a method that can be used for the resistance estimation of a PWM (Pulse Width Modulation)-driven solenoid. By using estimated solenoid resistance, the PWM duty ratio was compensated to be proportional to the solenoid current. The proposed method was developed for use with EHB (Electro-Hydraulic Braking) systems, which are essential features of the regenerative braking system of many electric vehicles. Because the HU (Hydraulic Unit) of most EHB systems performs not only ABS/TCS/ESP (Electronic Stability Program) functions but also service braking function, the possible duration of continuous solenoid driving is so long that the generated heat can drastically change the level of solenoid resistance. The current model of the PWM-driven solenoid is further developed in this paper; from this a new resistance equation is derived. This resistance equation is solved by using an iterative method known as the FPT (fixed point theorem). Furthermore, by taking the average of the resistance estimates, it was possible to successfully eliminate the effect of measurement noise factors. Simulation results showed that the proposed method contained a sufficient pass-band in the frequency response. Experimental results also showed that adaptive solenoid driving which incorporates resistance estimations is able to maintain a linear relationship between the PWM duty ratio and the solenoid current in spite of a wide variety of ambient temperatures and continuous driving.

Original languageEnglish
Pages (from-to)249-258
Number of pages10
JournalInternational Journal of Automotive Technology
Volume8
Issue number2
Publication statusPublished - 2007 Apr 1

Fingerprint

Solenoids
Pulse width modulation
Braking
Hydraulics
Regenerative braking
Electric vehicles
Iterative methods
Frequency response

All Science Journal Classification (ASJC) codes

  • Automotive Engineering

Cite this

Jung, H. G. ; Hwang, J. Y. ; Yoon, P. J. ; Kim, J. H. / Resistance estimation of a pwm-driven solenoid. In: International Journal of Automotive Technology. 2007 ; Vol. 8, No. 2. pp. 249-258.
@article{6bd75f00e0704af4bb6c51eaf677781a,
title = "Resistance estimation of a pwm-driven solenoid",
abstract = "This paper proposes a method that can be used for the resistance estimation of a PWM (Pulse Width Modulation)-driven solenoid. By using estimated solenoid resistance, the PWM duty ratio was compensated to be proportional to the solenoid current. The proposed method was developed for use with EHB (Electro-Hydraulic Braking) systems, which are essential features of the regenerative braking system of many electric vehicles. Because the HU (Hydraulic Unit) of most EHB systems performs not only ABS/TCS/ESP (Electronic Stability Program) functions but also service braking function, the possible duration of continuous solenoid driving is so long that the generated heat can drastically change the level of solenoid resistance. The current model of the PWM-driven solenoid is further developed in this paper; from this a new resistance equation is derived. This resistance equation is solved by using an iterative method known as the FPT (fixed point theorem). Furthermore, by taking the average of the resistance estimates, it was possible to successfully eliminate the effect of measurement noise factors. Simulation results showed that the proposed method contained a sufficient pass-band in the frequency response. Experimental results also showed that adaptive solenoid driving which incorporates resistance estimations is able to maintain a linear relationship between the PWM duty ratio and the solenoid current in spite of a wide variety of ambient temperatures and continuous driving.",
author = "Jung, {H. G.} and Hwang, {J. Y.} and Yoon, {P. J.} and Kim, {J. H.}",
year = "2007",
month = "4",
day = "1",
language = "English",
volume = "8",
pages = "249--258",
journal = "International Journal of Automotive Technology",
issn = "1229-9138",
publisher = "Korean Society of Automotive Engineers",
number = "2",

}

Jung, HG, Hwang, JY, Yoon, PJ & Kim, JH 2007, 'Resistance estimation of a pwm-driven solenoid', International Journal of Automotive Technology, vol. 8, no. 2, pp. 249-258.

Resistance estimation of a pwm-driven solenoid. / Jung, H. G.; Hwang, J. Y.; Yoon, P. J.; Kim, J. H.

In: International Journal of Automotive Technology, Vol. 8, No. 2, 01.04.2007, p. 249-258.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Resistance estimation of a pwm-driven solenoid

AU - Jung, H. G.

AU - Hwang, J. Y.

AU - Yoon, P. J.

AU - Kim, J. H.

PY - 2007/4/1

Y1 - 2007/4/1

N2 - This paper proposes a method that can be used for the resistance estimation of a PWM (Pulse Width Modulation)-driven solenoid. By using estimated solenoid resistance, the PWM duty ratio was compensated to be proportional to the solenoid current. The proposed method was developed for use with EHB (Electro-Hydraulic Braking) systems, which are essential features of the regenerative braking system of many electric vehicles. Because the HU (Hydraulic Unit) of most EHB systems performs not only ABS/TCS/ESP (Electronic Stability Program) functions but also service braking function, the possible duration of continuous solenoid driving is so long that the generated heat can drastically change the level of solenoid resistance. The current model of the PWM-driven solenoid is further developed in this paper; from this a new resistance equation is derived. This resistance equation is solved by using an iterative method known as the FPT (fixed point theorem). Furthermore, by taking the average of the resistance estimates, it was possible to successfully eliminate the effect of measurement noise factors. Simulation results showed that the proposed method contained a sufficient pass-band in the frequency response. Experimental results also showed that adaptive solenoid driving which incorporates resistance estimations is able to maintain a linear relationship between the PWM duty ratio and the solenoid current in spite of a wide variety of ambient temperatures and continuous driving.

AB - This paper proposes a method that can be used for the resistance estimation of a PWM (Pulse Width Modulation)-driven solenoid. By using estimated solenoid resistance, the PWM duty ratio was compensated to be proportional to the solenoid current. The proposed method was developed for use with EHB (Electro-Hydraulic Braking) systems, which are essential features of the regenerative braking system of many electric vehicles. Because the HU (Hydraulic Unit) of most EHB systems performs not only ABS/TCS/ESP (Electronic Stability Program) functions but also service braking function, the possible duration of continuous solenoid driving is so long that the generated heat can drastically change the level of solenoid resistance. The current model of the PWM-driven solenoid is further developed in this paper; from this a new resistance equation is derived. This resistance equation is solved by using an iterative method known as the FPT (fixed point theorem). Furthermore, by taking the average of the resistance estimates, it was possible to successfully eliminate the effect of measurement noise factors. Simulation results showed that the proposed method contained a sufficient pass-band in the frequency response. Experimental results also showed that adaptive solenoid driving which incorporates resistance estimations is able to maintain a linear relationship between the PWM duty ratio and the solenoid current in spite of a wide variety of ambient temperatures and continuous driving.

UR - http://www.scopus.com/inward/record.url?scp=34247143336&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34247143336&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:34247143336

VL - 8

SP - 249

EP - 258

JO - International Journal of Automotive Technology

JF - International Journal of Automotive Technology

SN - 1229-9138

IS - 2

ER -