Shape design of the surface mounted permanent magnet in a synchronous machine

Hyeoksoo Hong, Jeonghoon Yoo

Research output: Contribution to journalArticle

26 Citations (Scopus)

Abstract

This paper deals with how to obtain the optimal shape of a permanent magnet of surface mounted permanent magnet brushless synchronous machine using the level set based topology optimization method. Two types of the flux linkage calculation method are formulated; one is a modified method based on traditional flux linkage calculation through transient analysis and the other is the mono-tooth method newly introduced in this study. The mono-tooth method makes it possible to avoid time-consuming transient analysis because it requires only magnetostatic field analysis and may deal with infinite design points. The level set based topology optimization method is combined with both types of flux linkage calculation method. The optimization problem for shape design of a surface mounted permanent magnet synchronous machine is defined focused on the permanent magnet shape design and optimization results by two different approaches are compared. The performance of the optimal model is also compared with that of a conventional magnet shape model.

Original languageEnglish
Article number5732699
Pages (from-to)2109-2117
Number of pages9
JournalIEEE Transactions on Magnetics
Volume47
Issue number8
DOIs
Publication statusPublished - 2011 Aug 1

Fingerprint

Permanent magnets
Shape optimization
Fluxes
Transient analysis
Magnetostatics
Magnets

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering
  • Electronic, Optical and Magnetic Materials

Cite this

@article{a0d1af6b78dc4333ab9351261b3ad81c,
title = "Shape design of the surface mounted permanent magnet in a synchronous machine",
abstract = "This paper deals with how to obtain the optimal shape of a permanent magnet of surface mounted permanent magnet brushless synchronous machine using the level set based topology optimization method. Two types of the flux linkage calculation method are formulated; one is a modified method based on traditional flux linkage calculation through transient analysis and the other is the mono-tooth method newly introduced in this study. The mono-tooth method makes it possible to avoid time-consuming transient analysis because it requires only magnetostatic field analysis and may deal with infinite design points. The level set based topology optimization method is combined with both types of flux linkage calculation method. The optimization problem for shape design of a surface mounted permanent magnet synchronous machine is defined focused on the permanent magnet shape design and optimization results by two different approaches are compared. The performance of the optimal model is also compared with that of a conventional magnet shape model.",
author = "Hyeoksoo Hong and Jeonghoon Yoo",
year = "2011",
month = "8",
day = "1",
doi = "10.1109/TMAG.2011.2128338",
language = "English",
volume = "47",
pages = "2109--2117",
journal = "IEEE Transactions on Magnetics",
issn = "0018-9464",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "8",

}

Shape design of the surface mounted permanent magnet in a synchronous machine. / Hong, Hyeoksoo; Yoo, Jeonghoon.

In: IEEE Transactions on Magnetics, Vol. 47, No. 8, 5732699, 01.08.2011, p. 2109-2117.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Shape design of the surface mounted permanent magnet in a synchronous machine

AU - Hong, Hyeoksoo

AU - Yoo, Jeonghoon

PY - 2011/8/1

Y1 - 2011/8/1

N2 - This paper deals with how to obtain the optimal shape of a permanent magnet of surface mounted permanent magnet brushless synchronous machine using the level set based topology optimization method. Two types of the flux linkage calculation method are formulated; one is a modified method based on traditional flux linkage calculation through transient analysis and the other is the mono-tooth method newly introduced in this study. The mono-tooth method makes it possible to avoid time-consuming transient analysis because it requires only magnetostatic field analysis and may deal with infinite design points. The level set based topology optimization method is combined with both types of flux linkage calculation method. The optimization problem for shape design of a surface mounted permanent magnet synchronous machine is defined focused on the permanent magnet shape design and optimization results by two different approaches are compared. The performance of the optimal model is also compared with that of a conventional magnet shape model.

AB - This paper deals with how to obtain the optimal shape of a permanent magnet of surface mounted permanent magnet brushless synchronous machine using the level set based topology optimization method. Two types of the flux linkage calculation method are formulated; one is a modified method based on traditional flux linkage calculation through transient analysis and the other is the mono-tooth method newly introduced in this study. The mono-tooth method makes it possible to avoid time-consuming transient analysis because it requires only magnetostatic field analysis and may deal with infinite design points. The level set based topology optimization method is combined with both types of flux linkage calculation method. The optimization problem for shape design of a surface mounted permanent magnet synchronous machine is defined focused on the permanent magnet shape design and optimization results by two different approaches are compared. The performance of the optimal model is also compared with that of a conventional magnet shape model.

UR - http://www.scopus.com/inward/record.url?scp=79960976059&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79960976059&partnerID=8YFLogxK

U2 - 10.1109/TMAG.2011.2128338

DO - 10.1109/TMAG.2011.2128338

M3 - Article

VL - 47

SP - 2109

EP - 2117

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

SN - 0018-9464

IS - 8

M1 - 5732699

ER -