Study of hermetic transitions for microwave packages

Jong Gwan Yook, Nihad I. Dib, Eray Yasan, Linda P.B. Katehi

Research output: Contribution to journalConference article

4 Citations (Scopus)

Abstract

Two numerical techniques, the finite difference in time domain (FDTD) and the finite element method (FEM) in frequency domain, are employed to characterize microstrip hermetic transition geometries in an effort to investigate high frequency effects. Measurements performed on these transitions compare favorably with theory. It is shown that these hermetic wall transitions may suffer from parasitic parallel plate modes which however can be eliminated with the use of vias at appropriate locations. Two different transitions have been analyzed from 5 GHz to 25 GHz and have been found to be limited in performance by higher return loss as frequency increases. This indicates the need for very careful characterization of transitions. intended for use in microwave and millimeter-wave applications.

Original languageEnglish
Pages (from-to)1579-1582
Number of pages4
JournalIEEE MTT-S International Microwave Symposium Digest
Volume3
Publication statusPublished - 1995 Jan 1
EventProceedings of the 1995 IEEE MTT-S International Microwave Symposium. Part 1 (of 3) - Orlando, FL, USA
Duration: 1995 May 161995 May 20

Fingerprint

Millimeter waves
Microwaves
Finite element method
microwaves
Geometry
parallel plates
millimeter waves
finite element method
geometry

All Science Journal Classification (ASJC) codes

  • Radiation
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Cite this

Yook, Jong Gwan ; Dib, Nihad I. ; Yasan, Eray ; Katehi, Linda P.B. / Study of hermetic transitions for microwave packages. In: IEEE MTT-S International Microwave Symposium Digest. 1995 ; Vol. 3. pp. 1579-1582.
@article{a25232f73e2b4d95980546441af088a1,
title = "Study of hermetic transitions for microwave packages",
abstract = "Two numerical techniques, the finite difference in time domain (FDTD) and the finite element method (FEM) in frequency domain, are employed to characterize microstrip hermetic transition geometries in an effort to investigate high frequency effects. Measurements performed on these transitions compare favorably with theory. It is shown that these hermetic wall transitions may suffer from parasitic parallel plate modes which however can be eliminated with the use of vias at appropriate locations. Two different transitions have been analyzed from 5 GHz to 25 GHz and have been found to be limited in performance by higher return loss as frequency increases. This indicates the need for very careful characterization of transitions. intended for use in microwave and millimeter-wave applications.",
author = "Yook, {Jong Gwan} and Dib, {Nihad I.} and Eray Yasan and Katehi, {Linda P.B.}",
year = "1995",
month = "1",
day = "1",
language = "English",
volume = "3",
pages = "1579--1582",
journal = "IEEE MTT-S International Microwave Symposium Digest",
issn = "0149-645X",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

Study of hermetic transitions for microwave packages. / Yook, Jong Gwan; Dib, Nihad I.; Yasan, Eray; Katehi, Linda P.B.

In: IEEE MTT-S International Microwave Symposium Digest, Vol. 3, 01.01.1995, p. 1579-1582.

Research output: Contribution to journalConference article

TY - JOUR

T1 - Study of hermetic transitions for microwave packages

AU - Yook, Jong Gwan

AU - Dib, Nihad I.

AU - Yasan, Eray

AU - Katehi, Linda P.B.

PY - 1995/1/1

Y1 - 1995/1/1

N2 - Two numerical techniques, the finite difference in time domain (FDTD) and the finite element method (FEM) in frequency domain, are employed to characterize microstrip hermetic transition geometries in an effort to investigate high frequency effects. Measurements performed on these transitions compare favorably with theory. It is shown that these hermetic wall transitions may suffer from parasitic parallel plate modes which however can be eliminated with the use of vias at appropriate locations. Two different transitions have been analyzed from 5 GHz to 25 GHz and have been found to be limited in performance by higher return loss as frequency increases. This indicates the need for very careful characterization of transitions. intended for use in microwave and millimeter-wave applications.

AB - Two numerical techniques, the finite difference in time domain (FDTD) and the finite element method (FEM) in frequency domain, are employed to characterize microstrip hermetic transition geometries in an effort to investigate high frequency effects. Measurements performed on these transitions compare favorably with theory. It is shown that these hermetic wall transitions may suffer from parasitic parallel plate modes which however can be eliminated with the use of vias at appropriate locations. Two different transitions have been analyzed from 5 GHz to 25 GHz and have been found to be limited in performance by higher return loss as frequency increases. This indicates the need for very careful characterization of transitions. intended for use in microwave and millimeter-wave applications.

UR - http://www.scopus.com/inward/record.url?scp=0029210289&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0029210289&partnerID=8YFLogxK

M3 - Conference article

AN - SCOPUS:0029210289

VL - 3

SP - 1579

EP - 1582

JO - IEEE MTT-S International Microwave Symposium Digest

JF - IEEE MTT-S International Microwave Symposium Digest

SN - 0149-645X

ER -