The comparison of torque values in two types of miniscrews placed in rabbits: Tapered and cylindrical shapes - preliminary study

Kyung Ho Kim, Chooryung Chung, Hyun Mi Yoo, Dong Sung Park, In Sung Jang, Seung Hyun Kyung

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Objective: This study compared the stability of cylindrical miniscrews (Cy, 7 mm in length) with that of tapered miniscrews (Ta, 5 mm in length), using torque values to determine if the healing time before loading affects the stability of the miniscrew and if the insertion torque is associated with the removal torque measured after a few weeks of healing. Methods: Ta and Cy with different thread lengths were placed in the tibias of 12 female New Zealand white rabbits (body weight: 3.0 - 3.5 kg), and the maximum insertion torque values (ITV) were measured. No orthodontic forces were applied so as to allow us to determine the pure effects of the different shapes. After 3 different healing periods (2, 4, and 6 weeks), maximum removal torque values (RTV) were measured immediately before the rabbits were sacrificed. R e sults: No minis-crews were loosened. There were no significant differences in ITV or RTV between the Ta and Cy nor were there any significant differences in the ITV and RTV between the 3 groups, which had different healing periods. There was a correlation between the ITV and RTV. C onclusions: Shorter Ta showed similar stability as Cy, as determined by torque values. This result strongly suggests that the tapered shape is more advantageous than the cylindrical shape. The RTV did not increase significantly over time. It is recommended that a miniscrew be loaded immediately; waiting a few weeks before loading should be avoided. The correlation between the ITV and RTV suggests that the ITV can be used to estimate a screw's future stability.

Original languageEnglish
Pages (from-to)280-287
Number of pages8
JournalKorean Journal of Orthodontics
Volume41
Issue number4
DOIs
Publication statusPublished - 2011 Aug 1

Fingerprint

Torque
Rabbits
Orthodontics
Tibia

All Science Journal Classification (ASJC) codes

  • Orthodontics

Cite this

@article{8ff76864c09f44469c606fe6806cae7f,
title = "The comparison of torque values in two types of miniscrews placed in rabbits: Tapered and cylindrical shapes - preliminary study",
abstract = "Objective: This study compared the stability of cylindrical miniscrews (Cy, 7 mm in length) with that of tapered miniscrews (Ta, 5 mm in length), using torque values to determine if the healing time before loading affects the stability of the miniscrew and if the insertion torque is associated with the removal torque measured after a few weeks of healing. Methods: Ta and Cy with different thread lengths were placed in the tibias of 12 female New Zealand white rabbits (body weight: 3.0 - 3.5 kg), and the maximum insertion torque values (ITV) were measured. No orthodontic forces were applied so as to allow us to determine the pure effects of the different shapes. After 3 different healing periods (2, 4, and 6 weeks), maximum removal torque values (RTV) were measured immediately before the rabbits were sacrificed. R e sults: No minis-crews were loosened. There were no significant differences in ITV or RTV between the Ta and Cy nor were there any significant differences in the ITV and RTV between the 3 groups, which had different healing periods. There was a correlation between the ITV and RTV. C onclusions: Shorter Ta showed similar stability as Cy, as determined by torque values. This result strongly suggests that the tapered shape is more advantageous than the cylindrical shape. The RTV did not increase significantly over time. It is recommended that a miniscrew be loaded immediately; waiting a few weeks before loading should be avoided. The correlation between the ITV and RTV suggests that the ITV can be used to estimate a screw's future stability.",
author = "Kim, {Kyung Ho} and Chooryung Chung and Yoo, {Hyun Mi} and Park, {Dong Sung} and Jang, {In Sung} and Kyung, {Seung Hyun}",
year = "2011",
month = "8",
day = "1",
doi = "10.4041/kjod.2011.41.4.280",
language = "English",
volume = "41",
pages = "280--287",
journal = "Korean Journal of Orthodontics",
issn = "2234-7518",
publisher = "Korean Association of Orthodontists",
number = "4",

}

The comparison of torque values in two types of miniscrews placed in rabbits : Tapered and cylindrical shapes - preliminary study. / Kim, Kyung Ho; Chung, Chooryung; Yoo, Hyun Mi; Park, Dong Sung; Jang, In Sung; Kyung, Seung Hyun.

In: Korean Journal of Orthodontics, Vol. 41, No. 4, 01.08.2011, p. 280-287.

Research output: Contribution to journalArticle

TY - JOUR

T1 - The comparison of torque values in two types of miniscrews placed in rabbits

T2 - Tapered and cylindrical shapes - preliminary study

AU - Kim, Kyung Ho

AU - Chung, Chooryung

AU - Yoo, Hyun Mi

AU - Park, Dong Sung

AU - Jang, In Sung

AU - Kyung, Seung Hyun

PY - 2011/8/1

Y1 - 2011/8/1

N2 - Objective: This study compared the stability of cylindrical miniscrews (Cy, 7 mm in length) with that of tapered miniscrews (Ta, 5 mm in length), using torque values to determine if the healing time before loading affects the stability of the miniscrew and if the insertion torque is associated with the removal torque measured after a few weeks of healing. Methods: Ta and Cy with different thread lengths were placed in the tibias of 12 female New Zealand white rabbits (body weight: 3.0 - 3.5 kg), and the maximum insertion torque values (ITV) were measured. No orthodontic forces were applied so as to allow us to determine the pure effects of the different shapes. After 3 different healing periods (2, 4, and 6 weeks), maximum removal torque values (RTV) were measured immediately before the rabbits were sacrificed. R e sults: No minis-crews were loosened. There were no significant differences in ITV or RTV between the Ta and Cy nor were there any significant differences in the ITV and RTV between the 3 groups, which had different healing periods. There was a correlation between the ITV and RTV. C onclusions: Shorter Ta showed similar stability as Cy, as determined by torque values. This result strongly suggests that the tapered shape is more advantageous than the cylindrical shape. The RTV did not increase significantly over time. It is recommended that a miniscrew be loaded immediately; waiting a few weeks before loading should be avoided. The correlation between the ITV and RTV suggests that the ITV can be used to estimate a screw's future stability.

AB - Objective: This study compared the stability of cylindrical miniscrews (Cy, 7 mm in length) with that of tapered miniscrews (Ta, 5 mm in length), using torque values to determine if the healing time before loading affects the stability of the miniscrew and if the insertion torque is associated with the removal torque measured after a few weeks of healing. Methods: Ta and Cy with different thread lengths were placed in the tibias of 12 female New Zealand white rabbits (body weight: 3.0 - 3.5 kg), and the maximum insertion torque values (ITV) were measured. No orthodontic forces were applied so as to allow us to determine the pure effects of the different shapes. After 3 different healing periods (2, 4, and 6 weeks), maximum removal torque values (RTV) were measured immediately before the rabbits were sacrificed. R e sults: No minis-crews were loosened. There were no significant differences in ITV or RTV between the Ta and Cy nor were there any significant differences in the ITV and RTV between the 3 groups, which had different healing periods. There was a correlation between the ITV and RTV. C onclusions: Shorter Ta showed similar stability as Cy, as determined by torque values. This result strongly suggests that the tapered shape is more advantageous than the cylindrical shape. The RTV did not increase significantly over time. It is recommended that a miniscrew be loaded immediately; waiting a few weeks before loading should be avoided. The correlation between the ITV and RTV suggests that the ITV can be used to estimate a screw's future stability.

UR - http://www.scopus.com/inward/record.url?scp=80052556039&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80052556039&partnerID=8YFLogxK

U2 - 10.4041/kjod.2011.41.4.280

DO - 10.4041/kjod.2011.41.4.280

M3 - Article

AN - SCOPUS:80052556039

VL - 41

SP - 280

EP - 287

JO - Korean Journal of Orthodontics

JF - Korean Journal of Orthodontics

SN - 2234-7518

IS - 4

ER -