The development of micro-fuel processor using low temperature co-fired ceramic (LTCC)

Yeena Shin, Okyoun Kim, Jong Chul Hong, Jeong Hoon Oh, Woo Jae Kim, Seungjoo Haam, Chan Hwa Chung

Research output: Contribution to journalArticle

19 Citations (Scopus)

Abstract

A micro-fuel processor system integrating steam reformer and partial oxidation reactor was manufactured using low temperature co-fired ceramic (LTCC). A CuO / ZnO / Al2 O3 catalyst and Pt-based catalyst prepared by wet impregnation were used for steam reforming and partial oxidation, respectively. The performance of the LTCC micro-fuel processor was measured at various operating conditions such as the effect of the ratio of the feed flow rate, the ratio of H2 O / CH3 OH and the operating temperature on the LTCC reformer and the CO clean-up system. The hydrogen concentration and the methanol conversion were high and stable as a durable micro-fuel processor from the feasibility test which was operated continuously for 12 h. The product gas was composed of 75% hydrogen, 25% carbon dioxide and carbon monoxide (< 50 ppm) at 260 {ring operator} C, respectively.

Original languageEnglish
Pages (from-to)1925-1933
Number of pages9
JournalInternational Journal of Hydrogen Energy
Volume31
Issue number13
DOIs
Publication statusPublished - 2006 Oct 1

Fingerprint

central processing units
ceramics
steam
catalysts
oxidation
hydrogen
operating temperature
Oxidation
Hydrogen
Temperature
carbon monoxide
Catalysts
carbon dioxide
Steam reforming
methyl alcohol
flow velocity
reactors
Impregnation
Carbon monoxide
operators

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment
  • Fuel Technology
  • Condensed Matter Physics
  • Energy Engineering and Power Technology

Cite this

Shin, Yeena ; Kim, Okyoun ; Hong, Jong Chul ; Oh, Jeong Hoon ; Kim, Woo Jae ; Haam, Seungjoo ; Chung, Chan Hwa. / The development of micro-fuel processor using low temperature co-fired ceramic (LTCC). In: International Journal of Hydrogen Energy. 2006 ; Vol. 31, No. 13. pp. 1925-1933.
@article{eb4206701e894a5a9d0bafb85e9b981e,
title = "The development of micro-fuel processor using low temperature co-fired ceramic (LTCC)",
abstract = "A micro-fuel processor system integrating steam reformer and partial oxidation reactor was manufactured using low temperature co-fired ceramic (LTCC). A CuO / ZnO / Al2 O3 catalyst and Pt-based catalyst prepared by wet impregnation were used for steam reforming and partial oxidation, respectively. The performance of the LTCC micro-fuel processor was measured at various operating conditions such as the effect of the ratio of the feed flow rate, the ratio of H2 O / CH3 OH and the operating temperature on the LTCC reformer and the CO clean-up system. The hydrogen concentration and the methanol conversion were high and stable as a durable micro-fuel processor from the feasibility test which was operated continuously for 12 h. The product gas was composed of 75{\%} hydrogen, 25{\%} carbon dioxide and carbon monoxide (< 50 ppm) at 260 {ring operator} C, respectively.",
author = "Yeena Shin and Okyoun Kim and Hong, {Jong Chul} and Oh, {Jeong Hoon} and Kim, {Woo Jae} and Seungjoo Haam and Chung, {Chan Hwa}",
year = "2006",
month = "10",
day = "1",
doi = "10.1016/j.ijhydene.2006.02.028",
language = "English",
volume = "31",
pages = "1925--1933",
journal = "International Journal of Hydrogen Energy",
issn = "0360-3199",
publisher = "Elsevier Limited",
number = "13",

}

The development of micro-fuel processor using low temperature co-fired ceramic (LTCC). / Shin, Yeena; Kim, Okyoun; Hong, Jong Chul; Oh, Jeong Hoon; Kim, Woo Jae; Haam, Seungjoo; Chung, Chan Hwa.

In: International Journal of Hydrogen Energy, Vol. 31, No. 13, 01.10.2006, p. 1925-1933.

Research output: Contribution to journalArticle

TY - JOUR

T1 - The development of micro-fuel processor using low temperature co-fired ceramic (LTCC)

AU - Shin, Yeena

AU - Kim, Okyoun

AU - Hong, Jong Chul

AU - Oh, Jeong Hoon

AU - Kim, Woo Jae

AU - Haam, Seungjoo

AU - Chung, Chan Hwa

PY - 2006/10/1

Y1 - 2006/10/1

N2 - A micro-fuel processor system integrating steam reformer and partial oxidation reactor was manufactured using low temperature co-fired ceramic (LTCC). A CuO / ZnO / Al2 O3 catalyst and Pt-based catalyst prepared by wet impregnation were used for steam reforming and partial oxidation, respectively. The performance of the LTCC micro-fuel processor was measured at various operating conditions such as the effect of the ratio of the feed flow rate, the ratio of H2 O / CH3 OH and the operating temperature on the LTCC reformer and the CO clean-up system. The hydrogen concentration and the methanol conversion were high and stable as a durable micro-fuel processor from the feasibility test which was operated continuously for 12 h. The product gas was composed of 75% hydrogen, 25% carbon dioxide and carbon monoxide (< 50 ppm) at 260 {ring operator} C, respectively.

AB - A micro-fuel processor system integrating steam reformer and partial oxidation reactor was manufactured using low temperature co-fired ceramic (LTCC). A CuO / ZnO / Al2 O3 catalyst and Pt-based catalyst prepared by wet impregnation were used for steam reforming and partial oxidation, respectively. The performance of the LTCC micro-fuel processor was measured at various operating conditions such as the effect of the ratio of the feed flow rate, the ratio of H2 O / CH3 OH and the operating temperature on the LTCC reformer and the CO clean-up system. The hydrogen concentration and the methanol conversion were high and stable as a durable micro-fuel processor from the feasibility test which was operated continuously for 12 h. The product gas was composed of 75% hydrogen, 25% carbon dioxide and carbon monoxide (< 50 ppm) at 260 {ring operator} C, respectively.

UR - http://www.scopus.com/inward/record.url?scp=33748060527&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33748060527&partnerID=8YFLogxK

U2 - 10.1016/j.ijhydene.2006.02.028

DO - 10.1016/j.ijhydene.2006.02.028

M3 - Article

VL - 31

SP - 1925

EP - 1933

JO - International Journal of Hydrogen Energy

JF - International Journal of Hydrogen Energy

SN - 0360-3199

IS - 13

ER -