Three-Dimensional Rapid Prototyping of Multidirectional Polymer Nanoprobes for Single Cell Insertion

Dasom Yang, Hyeonaug Hong, Yoon Ho Seo, Lo Hyun Kim, Won Hyoung Ryu

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

Three-dimensional (3D) thermal drawing at nanoscale as a novel rapid prototyping method was demonstrated to create multidirectional polymer nanoprobes for single cell analysis. This 3D drawing enables simple and rapid fabrication of polymeric nanostructures with high aspect ratio. The effect of thermal drawing parameters, such as drawing speeds, dipping depths, and contact duration on the final geometry of polymer nanostructures was investigated. Vertically aligned and L-shaped nanoprobes were fabricated and their insertion into living single cells such as algal cells and human neural stem cells was demonstrated. This technique can be extended to create more complex 3D structures by controlling drawing steps and directions on any surface.

Original languageEnglish
Pages (from-to)16873-16880
Number of pages8
JournalACS Applied Materials and Interfaces
Volume7
Issue number30
DOIs
Publication statusPublished - 2015 Aug 5

Fingerprint

Nanoprobes
Rapid prototyping
Nanostructures
Polymers
Stem cells
Aspect ratio
Fabrication
Geometry
Hot Temperature
Direction compound

All Science Journal Classification (ASJC) codes

  • Materials Science(all)

Cite this

Yang, Dasom ; Hong, Hyeonaug ; Seo, Yoon Ho ; Kim, Lo Hyun ; Ryu, Won Hyoung. / Three-Dimensional Rapid Prototyping of Multidirectional Polymer Nanoprobes for Single Cell Insertion. In: ACS Applied Materials and Interfaces. 2015 ; Vol. 7, No. 30. pp. 16873-16880.
@article{511e64395b1541c3a4fe7b6e1bd48add,
title = "Three-Dimensional Rapid Prototyping of Multidirectional Polymer Nanoprobes for Single Cell Insertion",
abstract = "Three-dimensional (3D) thermal drawing at nanoscale as a novel rapid prototyping method was demonstrated to create multidirectional polymer nanoprobes for single cell analysis. This 3D drawing enables simple and rapid fabrication of polymeric nanostructures with high aspect ratio. The effect of thermal drawing parameters, such as drawing speeds, dipping depths, and contact duration on the final geometry of polymer nanostructures was investigated. Vertically aligned and L-shaped nanoprobes were fabricated and their insertion into living single cells such as algal cells and human neural stem cells was demonstrated. This technique can be extended to create more complex 3D structures by controlling drawing steps and directions on any surface.",
author = "Dasom Yang and Hyeonaug Hong and Seo, {Yoon Ho} and Kim, {Lo Hyun} and Ryu, {Won Hyoung}",
year = "2015",
month = "8",
day = "5",
doi = "10.1021/acsami.5b05254",
language = "English",
volume = "7",
pages = "16873--16880",
journal = "ACS applied materials & interfaces",
issn = "1944-8244",
publisher = "American Chemical Society",
number = "30",

}

Three-Dimensional Rapid Prototyping of Multidirectional Polymer Nanoprobes for Single Cell Insertion. / Yang, Dasom; Hong, Hyeonaug; Seo, Yoon Ho; Kim, Lo Hyun; Ryu, Won Hyoung.

In: ACS Applied Materials and Interfaces, Vol. 7, No. 30, 05.08.2015, p. 16873-16880.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Three-Dimensional Rapid Prototyping of Multidirectional Polymer Nanoprobes for Single Cell Insertion

AU - Yang, Dasom

AU - Hong, Hyeonaug

AU - Seo, Yoon Ho

AU - Kim, Lo Hyun

AU - Ryu, Won Hyoung

PY - 2015/8/5

Y1 - 2015/8/5

N2 - Three-dimensional (3D) thermal drawing at nanoscale as a novel rapid prototyping method was demonstrated to create multidirectional polymer nanoprobes for single cell analysis. This 3D drawing enables simple and rapid fabrication of polymeric nanostructures with high aspect ratio. The effect of thermal drawing parameters, such as drawing speeds, dipping depths, and contact duration on the final geometry of polymer nanostructures was investigated. Vertically aligned and L-shaped nanoprobes were fabricated and their insertion into living single cells such as algal cells and human neural stem cells was demonstrated. This technique can be extended to create more complex 3D structures by controlling drawing steps and directions on any surface.

AB - Three-dimensional (3D) thermal drawing at nanoscale as a novel rapid prototyping method was demonstrated to create multidirectional polymer nanoprobes for single cell analysis. This 3D drawing enables simple and rapid fabrication of polymeric nanostructures with high aspect ratio. The effect of thermal drawing parameters, such as drawing speeds, dipping depths, and contact duration on the final geometry of polymer nanostructures was investigated. Vertically aligned and L-shaped nanoprobes were fabricated and their insertion into living single cells such as algal cells and human neural stem cells was demonstrated. This technique can be extended to create more complex 3D structures by controlling drawing steps and directions on any surface.

UR - http://www.scopus.com/inward/record.url?scp=84938613540&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84938613540&partnerID=8YFLogxK

U2 - 10.1021/acsami.5b05254

DO - 10.1021/acsami.5b05254

M3 - Article

C2 - 26144221

AN - SCOPUS:84938613540

VL - 7

SP - 16873

EP - 16880

JO - ACS applied materials & interfaces

JF - ACS applied materials & interfaces

SN - 1944-8244

IS - 30

ER -