### Abstract

Two-dimensional velocity retrieval methods from a single channel high resolution SAR data through a joint time-frequency analysis and a fractional Fourier transform (FrFT) are presented. Two-dimensional velocity can be measured by estimation of the Doppler center frequency and Doppler frequency rate for the range and azimuth velocity component, respectively. The Doppler spectrum along a Doppler phase history line in the time-frequency domain was reconstructed and projected onto the frequency and time dimension. The peak of the frequency-axis projected spectrum corresponds to the Doppler center frequency, while that of the time-axis indicates an azimuth time of closest approach. The Doppler frequency rate is also measured by the slope deviation of the Doppler spectrum. Simulation using TerraSAR-X parameters indicated that the velocity errors were less than 1 m/sec or 5% for moving objects with a velocity higher than 3 m/sec. While the measurement of Doppler center frequency was reliable over the entire velocity range, errors in Doppler frequency rate became large if the velocity was lower than 3 m/sec. An experiment using TerraSAR-X and truck-mounted corner reflectors validated the measurement accuracy of the approach. Absolute and percent errors of the range velocity were 1.4 km/h and 2.8%, respectively, while the azimuth velocity measurement was comparatively accurate under an assumption of zero acceleration. To apply the method to single-look complex data, the full Doppler bandwidth must be preserved. Application of a fractional Fourier transform (FrFT) to the same data is also presented. The FrFT approach significantly improves computational efficiency and is superior to the WVD approach in estimation of Doppler frequency rate.

Original language | English |
---|---|

Title of host publication | 2011 3rd International Asia-Pacific Conference on Synthetic Aperture Radar, APSAR 2011 |

Pages | 495-498 |

Number of pages | 4 |

Publication status | Published - 2011 Dec 22 |

Event | 2011 3rd International Asia-Pacific Conference on Synthetic Aperture Radar, APSAR 2011 - Seoul, Korea, Republic of Duration: 2011 Sep 26 → 2011 Sep 30 |

### Publication series

Name | 2011 3rd International Asia-Pacific Conference on Synthetic Aperture Radar, APSAR 2011 |
---|

### Other

Other | 2011 3rd International Asia-Pacific Conference on Synthetic Aperture Radar, APSAR 2011 |
---|---|

Country | Korea, Republic of |

City | Seoul |

Period | 11/9/26 → 11/9/30 |

### Fingerprint

### All Science Journal Classification (ASJC) codes

- Computer Networks and Communications
- Communication

### Cite this

*2011 3rd International Asia-Pacific Conference on Synthetic Aperture Radar, APSAR 2011*(pp. 495-498). [6087091] (2011 3rd International Asia-Pacific Conference on Synthetic Aperture Radar, APSAR 2011).

}

*2011 3rd International Asia-Pacific Conference on Synthetic Aperture Radar, APSAR 2011.*, 6087091, 2011 3rd International Asia-Pacific Conference on Synthetic Aperture Radar, APSAR 2011, pp. 495-498, 2011 3rd International Asia-Pacific Conference on Synthetic Aperture Radar, APSAR 2011, Seoul, Korea, Republic of, 11/9/26.

**Velocity retrieval of moving object from a single channel high resolution SAR data.** / Park, Jeong Won; Won, Joong Sun.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Velocity retrieval of moving object from a single channel high resolution SAR data

AU - Park, Jeong Won

AU - Won, Joong Sun

PY - 2011/12/22

Y1 - 2011/12/22

N2 - Two-dimensional velocity retrieval methods from a single channel high resolution SAR data through a joint time-frequency analysis and a fractional Fourier transform (FrFT) are presented. Two-dimensional velocity can be measured by estimation of the Doppler center frequency and Doppler frequency rate for the range and azimuth velocity component, respectively. The Doppler spectrum along a Doppler phase history line in the time-frequency domain was reconstructed and projected onto the frequency and time dimension. The peak of the frequency-axis projected spectrum corresponds to the Doppler center frequency, while that of the time-axis indicates an azimuth time of closest approach. The Doppler frequency rate is also measured by the slope deviation of the Doppler spectrum. Simulation using TerraSAR-X parameters indicated that the velocity errors were less than 1 m/sec or 5% for moving objects with a velocity higher than 3 m/sec. While the measurement of Doppler center frequency was reliable over the entire velocity range, errors in Doppler frequency rate became large if the velocity was lower than 3 m/sec. An experiment using TerraSAR-X and truck-mounted corner reflectors validated the measurement accuracy of the approach. Absolute and percent errors of the range velocity were 1.4 km/h and 2.8%, respectively, while the azimuth velocity measurement was comparatively accurate under an assumption of zero acceleration. To apply the method to single-look complex data, the full Doppler bandwidth must be preserved. Application of a fractional Fourier transform (FrFT) to the same data is also presented. The FrFT approach significantly improves computational efficiency and is superior to the WVD approach in estimation of Doppler frequency rate.

AB - Two-dimensional velocity retrieval methods from a single channel high resolution SAR data through a joint time-frequency analysis and a fractional Fourier transform (FrFT) are presented. Two-dimensional velocity can be measured by estimation of the Doppler center frequency and Doppler frequency rate for the range and azimuth velocity component, respectively. The Doppler spectrum along a Doppler phase history line in the time-frequency domain was reconstructed and projected onto the frequency and time dimension. The peak of the frequency-axis projected spectrum corresponds to the Doppler center frequency, while that of the time-axis indicates an azimuth time of closest approach. The Doppler frequency rate is also measured by the slope deviation of the Doppler spectrum. Simulation using TerraSAR-X parameters indicated that the velocity errors were less than 1 m/sec or 5% for moving objects with a velocity higher than 3 m/sec. While the measurement of Doppler center frequency was reliable over the entire velocity range, errors in Doppler frequency rate became large if the velocity was lower than 3 m/sec. An experiment using TerraSAR-X and truck-mounted corner reflectors validated the measurement accuracy of the approach. Absolute and percent errors of the range velocity were 1.4 km/h and 2.8%, respectively, while the azimuth velocity measurement was comparatively accurate under an assumption of zero acceleration. To apply the method to single-look complex data, the full Doppler bandwidth must be preserved. Application of a fractional Fourier transform (FrFT) to the same data is also presented. The FrFT approach significantly improves computational efficiency and is superior to the WVD approach in estimation of Doppler frequency rate.

UR - http://www.scopus.com/inward/record.url?scp=83755182799&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=83755182799&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:83755182799

SN - 9788993246179

T3 - 2011 3rd International Asia-Pacific Conference on Synthetic Aperture Radar, APSAR 2011

SP - 495

EP - 498

BT - 2011 3rd International Asia-Pacific Conference on Synthetic Aperture Radar, APSAR 2011

ER -